Uranium transport around the reactor zone at Bangombé and Okélobondo (Oklo): examples of hydrogeological and geochemical model integration and data evaluation

The sites at Bangombé and Okélobondo (Oklo) in Gabon provide a unique opportunity to study the behaviour of products from natural nuclear reactions in the vicinity of reactor zones which were active around two billion years ago. The Commission of the European Communities initiated the Oklo Natural Analogue Programme. One of the principal aims was to study indications of present time migration of elements from the reactor zones under ambient conditions. The hydrogeological and hydrochemical data from the Oklo sites were modelled in order to better understand the geochemical behaviour of radionuclides in the natural system, by using independent models and by comparing the modelling outcome. Two modelling approaches were used: M3 code (hydrochemical mixing and mass balance model), developed by the Swedish Nuclear Fuel and Waste Management Company (SKB) and HYTEC (reactive transport model) developed by Ecole des Mines de Paris. Two different reactor zones were studied: Bangombé, a shallow site, the reactor being at 11 m depth, and OK84 at Okélobondo, situated at about 450 m depth, more comparable with a real repository location. This allowed the validation of modelling tools in two different sedimentary environments: one shallow, with a more homogeneous layering situated in an area of meteoric alteration, and the other offering the opportunity to study radionuclide migration from the reaction zone over a distance of 450 m through very heterogeneous sedimentary layers. The modeling results indicate that the chemical reactions retarding radionuclide transport are very different at the two sites. At Bangombé, the decomposition of organic material consumes oxygen and at Okélobondo the oxygen is consumed by inorganic reactions resulting, in both cases, in uranium retardation. Both modelling approaches (statistic with M3 code and deterministic with HYTEC code) could describe this situation. The goal of this exercise is to test codes which can help to describe and understand the processes taking place at the sites, validate the models with in situ data, and thus build confidence in the tools used for future site characterization. Ultimately, this allows identifying and selecting processes and parameters that can be used as input into repository performance assessment calculations and modelling exercises.     

Metal ion removal from water by sorption on paper mill sludge

Chromatographic columns packed with paper mill sludge are employed for metal ion recovery from water. The breakthrough curves show that cadmium, copper, lead and silver are removed from acid solutions (pH 2, 4); the affinity series is Pb(II)>Cu(II)>Ag(I)>Cd(II). Both the amount of metal retained and the metal-matrix interaction are pH dependent; the sorptive capacity increases with increasing pH. When the metals are present together at the same initial concentrations a competition among the different ions occurs although the affinity order remains unchanged. In metal recovery from the paper mill sludge column, the total amount of the cadmium and copper is displaced by HCl 1.0 M, 65% of the lead by HCl 0.1 M and 75% of the silver by HNO(3) 0.1 M. More than 95% of copper and lead and less than 20% of cadmium were recovered with HCl 0.1 M when the metals were present at the same time.     

Congener-specific accumulation of polychlorinated biphenyls in ovarian follicular wall follows repeated exposure to PCB 126 and PCB 153. Comparison of tissue levels of PCB and biological changes

OBJECTIVE: Small (SF), medium (MF) and large (LF) preovulatory porcine follicles were isolated and incubated in an Erlenmeyer flask containing 5 ml of medium with addition of PCB 126 or PCB 153 to test differences in their accumulation in the follicular wall. METHODS; The follicles were incubated in M199 medium at 37 degrees C with constant shaking at 70 rpm, for 6 days. The media were changed every day and repeated dose 25 pg/ml of PCB 126 or 25 ng/ml of PCB 153 was added each day till 6 days of culture. Media were collected every day and frozen for steroid analysis by RIA. 24 h after the last treatment follicles were frozen for further polychlorinated biphenyls (PCB) content analysis. PCB concentrations in the follicular wall were analysed by mass spectrometry. RESULTS: 3.3%; 3.6% and 5.6% of total PCB 126 dose, and 71%; 71.4% and 30.4% of total PCB 153 dose accumulated in SF, MF and LF follicles, respectively. The accumulative effect of PCB was manifested by the disruption of estradiol (E2) secretion. In SF antiestrogenic action of PCB 126 was observed during the whole time of exposure while PCB 153 decreased E2 till 4 days of culture and then estrogenic action was observed. In MF, both these congeners decreased E2 till 5 days of exposure and then estrogenic actions were noted with the highest magnification in the case of PCB 126. In LF both PCB studied increased E2 till 3 days of exposure with the highest magnification of PCB 126, then antiestrogenic action was noted. Testosterone secretion was generally affected in a pattern oposite to that of E2 suggesting action on P450arom activity. CONCLUSION: The results of these studies demonstrated that disruption of aromatization process in the follicles following repeated exposure to both congeners is not directly correlated with the bioaccumulation or amount of PCB within the follicular wall.     

AFLP analysis as biomarker of exposure to organic and inorganic genotoxic substances in plants

In recent years several plant species have been in use as bioindicators and several tests have been developed to evaluate the toxicity of environmental pollutants in vegetal organisms. In the present paper Arabidopsis thaliana (L.) Heynh. (ecotype Wassilewskija) was used as bioindicators of two genotoxic substances: potassium dichromate and dihydrophenanthrene. Inhibition of seed germination was observed with both pollutants. AFLP analysis (i) indicated that both substances are genotoxic, (ii) showed that dihydrophenanthrene induces DNA changes in different target sequences than potassium dichromate, (iii) quantified the genotoxic effect using cluster analysis by comparing DNA from treated plants with that of control plants. On the basis of these considerations we suggest that AFLP method is a powerful tool for measuring qualitative and quantitative genotoxic activity due to environmental pollutants. AFLP method can be applied to a wide range of bioindicator organisms and may become a universal methodology to identify target genes for specific genotoxic agents. This could open up possibilities for designing specifically targeted assays and new approaches to risk assessment.     

Geochemical evidences of the anthropogenic alteration of trace metal composition of the sediments of Chiricahueto marsh (SE Gulf of California)

Seven sediment cores (60-80 cm) were collected at Chiricahueto marsh, a salt marsh influenced by agrochemical, domestic and industrial effluents. The concentrations of Ag, Al, Cd, Co, Cu, Fe, Li, Mn, Pb, V and Zn were studied in the solid phase at each 1-cm section. The profiles of Ag, Cd, Cu, Mn, Ni, Pb and Zn showed a slight recent pollution in the site with enrichment and anthropogenic factors higher than unity; and correlation analysis indicated a direct association with organic carbon. Al, Co, Cr, Fe, Li, and V concentration profiles displayed a negative correlation with organic C and positive with mud content and no consistent enrichment at surface. Based on the principal component analysis and correlation analysis, two principal groups of metals were identified. The first group includes Al, Co, Cr, Fe and Li, that are derived predominantly from the weathering of parent materials in the local bedrock; and the second group include most of the metals, which were relatively enriched at surficial sediments, that are produced mainly by anthropogenic activities such as agriculture (Cd, Cu and Zn), sewage effluents (Ag, Cd, Cu, Ni, Pb and Zn) and in lesser extent atmospheric deposition (Cd and Pb).     

Solventless sample preparation for pesticides analysis in environmental water samples using solid-phase microextraction-high resolution gas chromatography/mass spectrometry (SPME-HRGC/MS)

Solid-phase micro-extraction (SPME) coupled on line with high resolution gas chromatography and mass spectrometric detection is described for the analysis of pesticides in environmental water samples. Experiments were performed in order to optimize the SPME extraction conditions for selected pesticides including tiomethon, trichorfon, dimethoate, diazinon, malathion, dicofol, methidathion, ethion, bromopropylate and pyrazophos from spiked water solutions. To enhance the SPME efficiency, experimental conditions including the fiber composition, stirring rate, temperature, adsorption time, desorption time and salt concentration were optimized. After validation, the SPME-GC/MS methodology was applied to real-world environmental water samples.     

Removal of biocide pentachlorophenol in water system by the spent mushroom compost of Pleurotus pulmonarius

Pentachlorophenol (PCP) has been widely used as a wood preservative since 1980s. Although it has been banned worldwide, residues of PCP are still commonly found. The spent compost of oyster mushroom Pleurotus pulmonarius (SMC) which was a degraded paddy straw-based substrate, contained 25% chitin. Five percentage of the SMC could remove 89.0 +/- 0.4% of 100 mg PCPl(-1) within 2 days at room temperature predominantly by biodegradation. The maximum removal capacity was 15.5 +/- 1.0 mg g(-1) SMC. The sorption kinetics of PCP by SMC can be described by the Freundlich monolayer model with a theoretical sorption capacity similar to that found for chitin. A PCP-degradative bacterium was isolated from the SMC. Yet, biodegradation was predominantly contributed by the immobilized ligninolytic enzymes secreted by the mushroom to the SMC. Degradation of PCP involves dechlorination, methylation, carboxylation and ring cleavage as verified by GC-MSD and ion chromatography. Thus, the SMC has a potential for treating PCP-contaminated water.     

Spatial and temporal organic and heavy metal pollution at Mai Po Marshes Nature Reserve,Hong Kong

An intensive monthly sampling of water and sediments from 12 sites over 8 months covering wet and dry seasons at Mai Po Marshes Nature Reserve was conducted during June 1997-February 1998. Major organic (C, N and P) and heavy metal pollutants (Cd, Cr, Cu, Ni, Pb, Zn) water and sediment samples were examined. The results showed that Mai Po Marshes were severely polluted by organic matter and heavy metals, and the water from Deep Bay appeared to be the source of pollution. Up to 13-55% chance that the sediments of Mai Po Marshes were classified as moderately to seriously metal contaminated materials, according to the guideline set by Hong Kong Government. Empirical models describing organic matter and heavy metal spatial and seasonal dynamics in the water and sediments were formulated, based on data analysis. During wet season (June-October), more than 58% variations of total P can be explained by ortho-P in water, while ammonia-N explained up to 90% variations of total Kjeldahl nitrogen in water. Throughout the whole sampling period (June-February), there were significant correlations (p<0.01) between total organic C in water. pH in the sediments and salinity in water appeared to be important factors determining heavy metal mobility in sediments, while potential metal release from the sediments is a concern when any oxidizing processes such as flooding or dredging are imposed on sediments.     

Isomer-specific analysis of chlorinated biphenyls,naphthalenes and dibenzofurans in Delor: polychlorinated biphenyl preparations from the former Czechoslovakia

Technical polychlorinated byphenyl (PCB) preparations--Delors 103, 104, 105, and 106--produced in the former Czechoslovakia were analyzed for their chlorobiphenyl (CB), chloronaphthalene (PCN) and chlorinated dibenzofuran (PCDF) composition and content using high resolution gas chromatography-mass spectrometry techniques. The congener patterns of Delors 103, 104, 105, and 106 resembled Aroclors 1242, 1248, 1254, and 1260. Delors contained PCNs and PCDFs, as impurities, at microgram per gram concentrations. Concentrations of PCNs and PCDFs in Delors were greater than those found in the corresponding Aroclors. The potential for the emissions of PCNs and PCDFs from Delor was estimated to be 3680 and 860 kg, respectively. Non- and mono-ortho PCBs were the major contributors to 2,3,7,8-tetrachlorodibenzo-p-dioxin (TCDD) equivalents in Delor mixtures.     

Boreal bog plants: nitrogen sources and uptake of recently deposited nitrogen

The main goals of this study were to determine the delta15N signature of quantitatively important boreal bog plants as basis for discussing their N sources, and to assess the effects of five different 3 year N treatments (i.e. 0, 5, 10, 20 and 40 kg N ha(-1) year(-1)) on the bog plants and surface peat at different depths (i.e. 0, 5, 10, 20 and 40 cm) by using 15N as tracer. Plants and peat were analyzed for N concentration, 15N natural abundance and 15N at.%. From the results we draw three main conclusions: First, the relative importance of different N sources is species-specific among bog plants. Second, an annual addition of 5 kg N ha(-1) year(-1) was sufficient to significantly increase the N concentration in Sphagnum mosses, liverworts and shallow rooted vascular plants, and an annual addition of 40 kg N ha(-1) year(-1) during 3 years was not sufficient to increase the N concentration in deep rooted plants, although the 15N content increased continuously, indicating a possible longer term effect. Third, an annual addition of 40 kg N ha(-1) year(-1) during 3 years increased the N content in surface peat at depths of 5 and 10 cm, but not at depths of 20 and 40 cm, indicating the capacity of the living Sphagnum mosses and the surface peat to take up deposited N, and thereby function as a filter.