Mo-modified Pd/Al2O3 catalysts for benzene catalytic combustion

Mo-modified Pd/Al2O3catalysts were prepared by an impregnation method and tested for the catalytic combustion of benzene. The catalysts were characterized by N2 isothermal adsorption, X-ray diffraction（XRD）, X-ray photoelectron spectroscopy（XPS）, temperatureprogrammed desorption of NH3（NH3-TPD）, H2temperature-programmed reduction（H2-TPR）, and high-angle annular dark-field scanning transmission electron microscopy（HAADF-STEM）. The results showed that the addition of Mo effectively improved the activity and stability of the Pd/Al2O3catalyst by increasing the dispersion of Pd active components, changing the partial oxidation state of palladium and increasing the oxygen species concentration on the surface of catalyst. In the case of the Pd-Mo/Al2O3catalyst,benzene conversion of 90% was obtained at temperatures as low as 190°C, which was 45°C lower than that for similar performance with the Pd/Al2O3catalyst. Moreover, the 1.0% Pd-5% Mo/Al2O3catalyst was more active than the 2.0% Pd/Al2O3catalyst. It was concluded that Pd and Mo have a synergistic effect in benzene catalytic combustion.     

Compositions and sources of organic acids in fine particles (PM2.5) over the Pearl River Delta region, south China

Organic acids as important constituents of organic aerosols not only influence the aerosols' hygroscopic property, but also enhance the formation of new particles and secondary organic aerosols. This study reported organic acids including C14–C32fatty acids, C4–C9dicarboxylic acids and aromatic acids in PM2.5collected during winter 2009 at six typical urban, suburban and rural sites in the Pearl River Delta region. Averaged concentrations of C14–C32fatty acids, aromatic acids and C4– C9 dicarboxylic acids were 157, 72.5 and 50.7 ng/m3, respectively. They totally accounted for 1.7% of measured organic carbon. C20–C32fatty acids mainly deriving from higher plant wax showed the highest concentration at the upwind rural site with more vegetation around, while C14–C18fatty acids were more abundant at urban and suburban sites, and dicarboxylic acids and aromatic acids except 1,4-phthalic acid peaked at the downwind rural site. Succinic and azelaic acid were the most abundant among C4–C9dicarboxylic acids, and 1,2-phthalic and 1,4-phthalic acid were dominant aromatic acids. Dicarboxylic acids and aromatic acids exhibited significant mutual correlations except for 1,4-phthalic acid, which was probably primarily emitted from combustion of solid wastes containing polyethylene terephthalate plastics. Spatial patterns and correlations with typical source tracers suggested that C14–C32fatty acids were mainly primary while dicarboxylic and aromatic acids were largely secondary. Principal component analysis resolved six sources including biomass burning, natural higher plant wax, two mixed anthropogenic and two secondary sources; further multiple linear regression revealed their contributions to individual organic acids. It turned out that more than 70% of C14–C18fatty acids were attributed to anthropogenic sources, about 50%–85% of the C20–C32fatty acids were attributed to natural sources, 80%–95% of dicarboxylic acids and 1,2-phthalic acid were secondary in contrast with that 81% of 1,4-phthalic acid was primary.     

基于主成分-聚类分析模型的生态环境脆弱性分析:以平潭综合实验区为例

目前对平潭综合实验区(平潭主岛)脆弱性评价方面的研究仅有地下水系统的脆弱性研究,对生态环境方面的脆弱性研究尚未见诸文献中。针对此情况,文章首先从自然因素、人为干扰因素和环境因素3个方面构建了生态环境脆弱性指标体系,然后运用主成分-聚类分析模型对平潭综合实验区的生态环境脆弱性进行分区。脆弱性分区结论为平潭综合实验区总体为中强度脆弱,其中极强脆弱区为白青乡,强度脆弱区为北厝镇和苏澳镇,中度脆弱区为中楼乡、澳前镇和敖东镇,轻度脆弱区为平原镇、潭城镇和流水镇,微脆弱区为芦洋乡。文章从增加防护林的面积和种类、调整优化土地利用结构、开展生态功能区划和生态环境保护规划的编制工作三方面提出了降低研究区域生态环境脆弱性的对策措施。     

浙江省污水污泥处理处置状况的调查

通过对丽水、宁波、衢州、诸暨等浙江省境内十几个地区的污水处理厂的调查发现:目前浙江省内的污水处理工艺中,A2/O、A/O、氧化沟三种工艺占了近50%的份额。而SBR因其方法特点正在受到越来越多的重视。在污泥处理工艺中,填埋占了最大的一部分,有近70%的污水处理厂将产生的污泥进行填埋处理。目前,污泥处理技术单一,需要继续探寻污泥的减量和资源化技术,为日益增多的污泥探寻出路。     

双组分VOCs的催化氧化及动力学分析

考察了微波加热与管式炉加热下挥发性有机化合物(VOCs)甲苯与氯苯的催化氧化性能,并对双组分VOCs的反应动力学进行了分析.结果表明,VOCs的竞争吸附使得双组分中甲苯和氯苯的转化率比单组分降低3%~12%;微波的"热点效应"与"非热效应"使得VOCs转化效率明显优于管式炉加热,尤其是氯苯的转化率提高了31%~38%;微波加热降低了氧化反应温度和处理能耗.动力学分析表明,微波加热下甲苯和氯苯的反应活化能比管式炉加热下减少了2146 J·mol-1和1450J·mol-1,微波加热下氯苯的化学反应速率常数是管式炉加热的35倍,甲苯的反应速率常数提高了6倍.     

一株耐低温石油降解菌的鉴定及降解特性

在低温条件下(15℃),从抚顺石油二厂曝气池活性污泥中驯化和分离得到一株以柴油为碳源的降解菌株Q21,通过菌体形态、生理生化反应特性和16S rDNA基因测序分析对其进行鉴定.菌株Q21为琼式不动杆菌(Acinetobacter junii),该菌株利用柴油生长的最佳条件为:接种量为10%,生长温度为15℃,pH值为7.0,摇床转速为150 r·min-1,盐度为0.5%~1.0%,降解率为71.50%;降解后的残油组分经GC-MS分析结果表明,菌株Q21能降解柴油中所含的C9~C24之间大部分烷烃.     

静置/好氧/缺氧序批式反应器（SBR）脱氮除磷效果研究

以静置段代替传统厌氧段,采用后置缺氧方式,考察了静置/好氧/缺氧序批式反应器(SBR)(R1)的生物脱氮除磷(BNR)性能,并与传统厌氧/好氧/缺氧序批式反应器(SBR)(R2)进行对比.两反应器进水乙酸钠、氨氮(NH+4-N)及磷酸盐(PO3-4-P)浓度均分别为350 mg·L-1(以COD计)、40 mg·L-1及12 mg·L-1,水力停留时间(HRT)为12 h.研究结果表明,R1长期运行中磷的去除率与R2相当,分别为92.4%和92.1%,而总氮(TN)去除率则较R2高,分别为83.5%和77.0%.R1静置段省去搅拌但仍能起到厌氧段的作用,为好氧快速摄磷奠定了基础,同时R1缺氧段发生反硝化摄磷,使出水磷降至0.91 mg·L-1.好氧段内R1发生了同步硝化-反硝化(SND),贡献了18.0%的TN去除量,R2也存在SND,但脱氮贡献率较少,仅为9.8%.R1和R2后置缺氧反硝化均以糖原驱动,反硝化速率分别为0.98、0.84 mg·g-1·h-1(以每g VSS产生的N(mg)计),出水TN分别为6.62、9.21 mg·L-1.研究表明,静置段代替传统厌氧段后,可获得更好的脱氮效果,且工艺更为简化.     

东亚大气可吸入颗粒物时空分布的数值模拟研究

利用嵌套网格空气质量模式(Nested Air Quality Prediction Model System,NAQPMS)模拟研究了2010年东亚地区可吸入颗粒物(PM10)的时空演变,并初步评估了其对人群健康的危险度.结果表明,NAQPMS模式能够合理地反映东亚地区PM10的时空分布,不同季节观测值和模拟值的总体相关系数达到0.65~0.85.2010年东亚PM10的地面浓度高值区(100μg·m-3)出现在我国华北、华中和内蒙古中西部等地区.其中,无机盐(硫酸盐、硝酸盐和铵盐)对我国东部PM10的贡献最大(10~70μg·m-3,20%~50%);一次PM10次之(5~50μg·m-3,10%~30%),有机物(5~30μg·m-3,10%~20%)和黑炭(3~20μg·m-3,3%~5%)紧随其后.PM10可以引起我国东部人群急性总死亡率增加2%~5%,对我国居民的健康水平构成了一定威胁.     

舰船海水管路腐蚀状态评估技术研究

目的研究建立舰船海水管路的腐蚀状态评估指标体系及评估方法。方法通过经验选择影响舰船海水管路腐蚀状态的重要指标,并确定相应评估方法、评价标准及权重。结果选择管材腐蚀程度、阴极保护状态、电绝缘保护状态、海水流速控制状态、密封材料密封状态5项参数组成海水管路系统腐蚀状态评估指标体系。结论可选用层次-模糊法对海水管路腐蚀状态进行评估,其中层次分析法(AHP)用来确定评价指标权重,模糊综合评判法用来处理评价指标值。     

澳大利亚新南威尔士州《污染土地管理法》及其实施效果

澳大利亚新南威尔士州1997年出台的《污染土地管理法》核心内容包括污染土地责任人的界定、初步调查令、重大污染土地的认定、治理令、自愿治理方案、继续治理令,以及污染土地治理费用的偿还,即环保署支付费用的偿还、公共权力机构执行命令时支付费用的偿还、当事人之间费用的偿还和统一基金拨款的偿还。《污染土地管理法》实施以来,效果较好。