Long-range transport of acidifying substances in East Asia—Part II: Source–receptor relationships

Region-to-grid source–receptor (S/R) relationships are established for sulfur and reactive nitrogen deposition in East Asia, using the Eulerian-type Community Multiscale Air Quality (CMAQ) model with emission and meteorology data for 2001. We proposed a source region attribution methodology by analyzing the non-linear responses of the CMAQ model to emission changes. Sensitivity simulations were conducted where emissions of SO₂, NO_x, and primary particles from a source region were reduced by 25%. The difference between the base and sensitivity simulations was multiplied by a factor of four, and then defined as the contribution from that source region. The transboundary influence exhibits strong seasonal variation and generally peaks during the dry seasons. Long-range transport from eastern China contributes a significant percentage (>20%) of anthropogenic reactive nitrogen as well as sulfur deposition in East Asia. At the same time, northwestern China receives approximately 35% of its sulfur load and 45% of its nitrogen load from foreign emissions. Sulfur emissions from Miyakejima and other volcanoes contribute approximately 50% of the sulfur load in Japan in 2001. Sulfur inflows from regions outside the study domain, which is attributed by using boundary conditions derived from the MOZART global atmospheric chemistry model, are pronounced (10–40%) over most parts of Asia. Compared with previous studies using simple Lagrangian models, our results indicate higher influence from long-range transport. The estimated S/R relationships are believed to be more realistic since they include global influence as well as internal interactions among different parts of China.     

A case study on raw material blending for the recycling of ferrous wastes in a blast furnace

The utilisation of ferrous wastes in a blast furnace is a well established recycling process to cope with the enormous amounts of ferrous residues in the iron and steel industry. The further input flows of this process, that is especially coke and fluxes, as well as its output flows, that is pig iron and by-products, are highly dependent on the blending of the ferrous wastes while they differ highly in the revenues gained for the treatment and their chemical composition. So far, no planning approach exists for the blending of the residues on the operational planning level that models the dependency of the costs and revenues on the raw material blend and the thermodynamic reactions in the recycling processes adequately. Therefore we present an approach for this operational production planning problem focusing on an integration of such a sufficiently detailed modelling of the underlying metallurgical processes into the planning model. The basis of our approach is a thermodynamic simulation of the processes. From this simulation we derive linear input-output functions for the relevant material and energy flows by using multiple linear regression. These input–output functions form the core of our blending model developed for the planning task. The model is implemented as an integrated decision support system. Exemplary application results are given. These results validate the approach and show that ecological the economic optimisation leads also to results which are advantageous in terms of resource efficiency and emission reduction. Though developed for a specific recycling process, the methodology can be transferred to other metallurgical (recycling) processes, as well as other parts of the process industries, and is therefore of high relevance.     

Characterization and classification of complex PAH samples using GC-qMS and GC-TOFMS

The aim of this study was to compare the polycyclic aromatic hydrocarbon (PAH) contents in a number of complex samples, including soil samples from industrial sites, anti-skid sand, urban dust and ash samples from municipal solid waste incinerators. The samples were characterized by routine analysis of PAHs (gas chromatography–quadrupole mass spectrometry) and gas chromatography–time of flight mass spectrometry (GC–TOFMS). Classification of the samples by principal component analysis (PCA) according to their composition of PAHs revealed that samples associated with traffic and the municipal incinerator formed homogeneous clusters, while the PAH-contaminated soils clustered in separate groups. Using spectral data to resolve co-eluting chromatographic peaks, 962 peaks could be identified in the GC–TOFMS analysis of a pooled sample and 123–527 peaks in the individual samples. Many of the studied extracts included a unique set of chemicals, indicating that they had a much more diverse contamination profile than their PAH contents suggested. Compared to routine analysis, GC–TOFMS provided more detailed information about each sample and in this study a large number of alkylated PAHs were found to be associated with the corresponding unsubstituted PAHs. The possibility to filter peaks according to different criteria (e.g. to include only peaks that were detected in the analysis of another sample) was explored and used to identify unique as well as common compounds within samples. This procedure could prove to be valuable for obtaining relevant chemical data for use in conjunction with results from various biological test systems.     

Atmospheric deposition, retention, and stream export of dioxins and PCBs in a pristine boreal catchment

The mass-balance between diffuse atmospheric deposition of organic pollutants, amount of pollutants retained by the terrestrial environment, and levels of pollutants released to surface stream waters was studied in a pristine northern boreal catchment. This was done by comparing the input of atmospheric deposition of polychlorinated dibenzo-p-dioxins and furans (PCDD/Fs) and PCBs with the amounts exported to surface waters. Two types of deposition samplers were used, equipped with a glass fibre thimble and an Amberlite sampler respectively. The measured fluxes showed clear seasonality, with most of the input and export occurring during winter and spring flood, respectively. The mass balance calculations indicates that the boreal landscape is an effective sink for PCDD/Fs and PCBs, as 96.0-99.9 % of received bulk deposition was retained, suggesting that organic pollutants will continue to impact stream water in the region for an extended period of time.     

Chemical and toxicological characterisation of PBDFs from photolytic decomposition of decaBDE in toluene

A substantial formation of PBDF congeners was observed during photolytic decomposition of decaBDE in toluene. The decaBDE degradation was monitored by chemical and toxicological analysis and in all, twenty-seven mono- to hexasubstituted polybrominated dibenzofurans (PBDFs) were detected in toluene solutions of decabromodiphenyl ether (decaBDE) after irradiation with UV-A, UV-AB and UV-ABC. The concentration levels of PBDFs formed after 16 h of UV exposure increased with wider spectra and were determined to be 3.5, 4.2 and 14 microg/ml after UV-A, UV-AB and UV-ABC irradiation, respectively. In accordance, bioassay derived TEQs (bio-TEQs), determined with the DR-CALUX assay, increased with a similar pattern. The PBDFs formed after the three UV exposures accounted for 0.31%, 0.35% and 1.2% of the initial amount of decaBDE (molar basis). The PBDF congener patterns were consistent in all three UV experiments which imply that no alterations were induced in the PBDF formation or degradation processes due to differences in UV irradiation. However, these processes tended to increase with wider spectra and increasing radiation energy most likely due to the strong absorbance of for example decaBDE at shorter wavelengths. After total decaBDE decomposition the PBDF formation increased significantly in the UV-ABC experiment. The tetra to hexasubstituted BDFs constituted the majority of detected compounds in all experiments. In all samples, the estimated chemical TEQ indicate that the bio-TEQs observed are largely explained by the presence of non-2,3,7,8-substituted PBDFs with relatively low toxicological potencies.     

Changes in toxicity and genotoxicity of industrial sewage sludge samples containing nitro- and amino-aromatic compounds following treatment in bioreactors with different oxygen regimes

Goals, Scope and Background

From 2005, deposition of organic waste will be banned in Sweden. Likewise, in Germany and Austria, similar bans are being planned, and further countries will probably follow. Thus, there is a need to develop new methods and to refine established techniques for sludge management in the whole of the European Union. For this end, there is also an urgent need for appropriate ecotoxicological approaches to elucidate and assess the hazard potential of sewage sludge. Therefore, the present study was designed to assess the capacity of various established sludge treatment methods using different oxygen regimes to degrade recalcitrant nitro-substituted organic compounds and reduce their toxicity. Sewage sludge samples from a wastewater treatment plant in Sweden (Cambrex Karlskoga AB, industrial area Björkborn) receiving wastewater from industries manufacturing pharmaceutical substances, chemical intermediates and explosives were processed with different sludge treatment methods. Among other treatment methods, bioreactors (for anaerobic and aerobic sludge treatment) were used. In the present investigation, a battery ofin vitro bioassays was employed to compare the cytotoxic and genotoxic potentials of different fractions of sludge samples in order to elucidate whether the treatments were suitable to reduce the toxicity of the sludge.

Methods

In order to investigate the cytotoxicity of the extracts of treated and untreated sludge samples, the acute cytotoxicity test with the permanent cell line RTL-W1 was used. Genotoxicity was tested by means of the comet assay (single cell gel electro-phoresis) with RTL-W1cells, and mutagenicity was assessed with the Ames test using the Salmonella typhimurium strains TA98, TA98NR and TA100. Sludge toxicity was tested in different fractions of organic extracts produced by acetone and hexane extractions. The subsequent clean-up procedure (silica gel chro-matography and elution with hexane and dichloromethane) resulted in two fractions, a lipophilic hexane-fraction and a semi-lipophilic dichloromethane-fraction. For the genotoxicity and mutagenicity tests, these fractions were reunited at equal ratios.

Results and Discussion

The acute cytotoxicity test with RTL-Wl cells revealed a high cytotoxic potential for the semi-li-pophilic DM-fractions of all sludge samples with NR₅₀ values (= effective concentration for 50% cell death in the neutral red test) from 8.9 up to 20 mg sludge d.w./ml medium. A low cytotoxic potential for the hexane fractions of the untreated sludge samples (NR₅₀ 400 to < 400 mg sludge d.w./ml medium) was observed, whereas the hexane fractions of the treated sludge samples showed elevated cytotoxicity increasing further with treatment in the bioreactors. The comet assay indicated that three out of eight of the reunited fractions had a significant genotoxic potential. Whereas the genotoxic potential of one sample treated anaerobically was very high with an induction factor of 11.6, a similar sample (taken from the same anaerobic reactor four months later) and one untreated sample showed lower potentials. The samples treated in another anaerobic bioreactor as well as the samples treated aerobically showed no genotoxic potential. Results indicate that aerobic treatment was basically adequate for reducing the genotoxicity of the sludge, whereas anaerobic treatment was only partly useful for reduction of genotoxicity. The Ames test revealed a very high mutagenic potential for the reunited fractions of the untreated sludge samples with strain TA98 (maximum induction factors (IF_max up to 45) and a relatively high potential for one of the samples treated aerobically (S2, IF_max = 18 (TA98, S9-)), thus documenting the suitability of both anaerobic and aerobic treatments to reduce the mutagenicity of the samples, however, with the aerobic treatment being less effective. Conclusions. Overall, none of the microbiological treatments for wastewater sludge in bioreactors was found to be ideal for general toxicity reduction of the sludge samples. Whereas cytotoxicity of the sludge increased or levelled off in most cases following either treatment, genotoxicity both increased or decreased after anaerobic treatment, depending on the specific sample. However, mutagenicity could generally be reduced by anaerobic treatment and, to a lesser degree, by aerobic treatment. Recommendationsand Perspectives. The complex modification of the diverse damage potentials of sludge sample extracts by use of anin vitro biotest battery following treatment for toxicity reduction in bioreactors showed that considerations of different toxicological endpoints is essential for an adequate hazard assessment. Whereas in the case of cytotoxicity reduction, the reactors proved ineffective, mutagenicity could be reduced significantly at least in some cases in this case study.

     

Comparison of Skimmed Milk and Lanthanum Flocculation for Concentration of Pathogenic Viruses in Water

Food and Environmental Virology - Concentration of viruses in water is necessary for detection and quantification of the viruses present, in order to evaluate microbiological barriers in water...