Effect of acid solutions on plants studied by the optical beam deflection method

The optical beam deflection method was applied to study the effects of acid solution on both a terrestial and aquatic plants Egeria and Cerastium, which are common aquatic plant and terrestial weed respectively. A probe beam from a He-Ne laser was passed through a vicinity of a leaf of the plants, which were put in culture dishes filled with acid solutions. Deflection signals of the probe beam were monitored and compared for acid solutions with different pH values. The results of Egria showed that the deflection signals changed dramatically when pH values of acid solutions were 2.0 and 3.0, while little at pH of 4.0 and 5.0. For Cerastium when pH were below 3.0, deflection signals changed greatly with time at the begining. After a certain period of time, deflection signals changed little with time. When pH value was above 4.0, deflection signals of Cerastium were still changing with time even after 20 hours. The results suggested that the damage threshold of pH was between 3.0 and 4.0 for both the land and aquatic plants.     

Removal of H2S using molten carbonate at high temperature

Gasification is considered to be an effective process for energy conversion from various sources such as coal, biomass, and waste. Cleanup of the hot syngas produced by such a process may improve the thermal efficiency of the overall gasification system. Therefore, the cleanup of hot syngas from biomass gasification using molten carbonate is investigated in bench-scale tests. Molten carbonate acts as an absorbent during desulfurization and dechlorination and as a thermal catalyst for tar cracking. In this study, the performance of molten carbonate for removing H₂S was evaluated. The temperature of the molten carbonate was set within the range from 800 to 1000 °C. It is found that the removal of H₂S is significantly affected by the concentration of CO₂ in the syngas. When only a small percentage of CO₂ is present, desulfurization using molten carbonate is inadequate. However, when carbon elements, such as char and tar, are continuously supplied, H₂S removal can be maintained at a high level.To confirm the performance of the molten carbonate gas-cleaning system, purified biogas was used as a fuel in power generation tests with a molten carbonate fuel cell (MCFC). The fuel cell is a high-performance sensor for detecting gaseous impurities. When purified gas from a gas-cleaning reactor was continuously supplied to the fuel cell, the cell voltage remained stable. Thus, the molten carbonate gas-cleaning reactor was found to afford good gas-cleaning performance.     

Depolymerization of Waste PET with Phosphoric Acid–Modified Silica Gel Under Microwave Irradiation

Chemical recycling of waste poly(ethylene terephthalate) (PET) using phosphoric acid–modified silica gel as a solid catalyst is reported. Advantageously, microwave irradiation was used to progress the depolymerization of PET. In this study, depolymerization of PET with a small amount of water is suggested as a suitable method. The depolymerized product, terephthalic acid was obtained and assigned by ¹H NMR and FT-IR spectroscopy. Finally, over 90 % conversion to terephthalic acid was achieved when waste plastic bottles were treated with the method. This results confirm the importance of the microwave power technique as a promising recycling method for plastic bottles made from PET, resulting in monomer recovery in addition to substantial energy saving.     

Achieving sustainable development goals through participatory forest management: Examples from South-Eastern Bangladesh

Forests managed through peoples' participation can help to achieve a number of sustainable development goals (SDGs). This paper, drawing data from four participatory forest management (PFM) projects in south-eastern Bangladesh, explored: (a) the factors that influenced the outcomes of PFM; and (b) contribution of PFM towards achieving selected SDGs. The research used observation, semi-structured household interviews, group discussions, vegetation survey and Ostromʼs design principles for data collection, Divergent forest conditions and factors in four PFM sites have had differential contribution to SDGs. Heterogeneity of user groups, insufficient coordination, absence of motivation, and land tenure conflicts had affected the attainment of SDGs. The PFM helped to achieve 9–11 SDGs comprising poverty reduction (Goal 1), improving food security (Goal 2), maintaining health and well-being (Goal 3), enhancing childrensʼ education (Goal 4), fair access to jobs and committees (Goals 5 and 10), sources of clean drinking water (Goal 6), affordable energy for cooking (Goal 7), increased household economy (Goal 8), climate change through carbon sequestration (Goal 13), forest conservation (Goal 15), and partnerships with relevant institutions (Goal 16). In order to achieve SDGs, PFM could be viewed as an integral part of government development strategies, which needs sectoral coordination and integration of relevant policies.     

Verification of the mutually complementary effect of fly ash and clinker aggregate on the strength,heat of hydration,and alkali-silica reaction

Journal of Material Cycles and Waste Management - Although fly ash, as used for supplementary cementitious material in Portland cement concrete, can reduce the heat of hydration and suppress the...     

Seasonal variation of Ra/Ra ratio in seaweed: implications for water circulation patterns in coastal areas of the Noto Peninsula, Japan

To examine water circulation patterns of coastal water, 72 seaweed (Sargasso) samples and 27 coastal water samples were collected from coastal areas of the Noto Peninsula, Japan, during the period from December 1998 to June 2002. The (228)Ra and (226)Ra activities of those samples were measured by low-background gamma-ray spectrometry. There was a wide range of activities of (228)Ra (0.5-2Bq/kg-fresh) and (226)Ra (0.5-1.2Bq/kg-fresh) in the Sargasso samples. The (228)Ra/(226)Ra activity ratio of Sargasso samples exhibited seasonal variation with minimum values in June ((228)Ra/(226)Ra= approximately 1) and maximum values in December (1.5-2.5), which was mainly governed by changes in (228)Ra activity. It is also notable that the seasonal variation of the (228)Ra/(226)Ra ratio of Sargasso is in approximate agreement with that of the ambient coastal water. Sargasso samples appear to have retained the (228)Ra/(226)Ra ratio of the ambient coastal waters, and the temporal variations in that ratio provide insight into seasonal changes in water circulation in the Noto Peninsula coastal area.     

Endogenous formation of hydrogen cyanide during distillation for the determination of total cyanide

This paper describes how organic compounds and nitrogen compounds induce the formation of hydrogen cyanide during the distillation process. Hydrogen cyanide formation was confirmed by X‐ray diffraction. The formation scheme for hydrogen cyanide from organic compounds is proposed.     

Relationship between the growth and survival of larval Pacific bluefin tuna, Thunnus orientalis

We tested the hypothesis that a large body size and rapid growth rate affect the survival of larval Pacific bluefin tuna, Thunnus orientalis (PBT), and analyzed larval growth in relation to environmental conditions. Seven high density larval patches of PBT were tracked with reference buoys in the northwestern Pacific Ocean for 28–171 h in May–June from 2004 to 2008. The otolith radii and daily growth rates of the survivor larvae (collected on later tracking days of each tracking session) tended to be larger and more rapid, respectively, than those of original larvae (collected on earlier tracking days). A large body size was found to positively affect the survival of larval PBT, as did a rapid growth rate, even at an early larval stage (7 days after hatching). Generalized linear modeling showed that the otolith radius was influenced positively by the sea temperature, stratification parameter and food density, while the growth rate was influenced positively by the sea temperature and food density.     

Evaluating the strength development of mortar using clinker fine aggregate with a combination of fly ash and its inhibitory effects on alkali–silica reaction and delayed ettringite formation

The aggregate composed of cement clinker, an intermediate cement product, improves strength development and mass transfer resistance of concrete. Fly ash (FA) is a supplementary cementitious material that can be substituted by cement. This study investigated the strength development of highly FA-substituted mortar mixed with cement clinker fine aggregate (CL) and tested its inhibitory effect against the alkali–silica reaction (ASR). In addition to these, this study provides the testing results of evaluating the effects of using cement clinker fine aggregate on delayed ettringite formation (DEF), which can be problematic for precast concrete products. The study results revealed that at 91 days of age, in the case of 80% replacement ratio of fly ash to cement, using CL exhibited similar strength development as mortar with limestone fine aggregate and no FA substitution. Furthermore, mortars with 70% and 80% FA substitution did not exhibit clear ASR-induced expansion even at 182 days of age. Lastly, mortar using clinker fine aggregate could suppress DEF-induced expansion at 182 days of age, which was similar to the effect obtained using FA. These results can promote the utilization of CL resources for concrete and using clinker as fine aggregate in precast concrete products.

     

Carbon Molecular Sieving Membranes Derived from Lignin-Based Materials

Carbon molecular sieving membranes were prepared by pyrolysis of lignocresol derived from lignin by the phase-separation method. Lignocresol membranes formed by a dip process on a porous -alumina tubing were carbonized at 400–800°C under nitrogen atmosphere. The thickness of the membrane formed on the outer surface of the substrate was about 400 nm judging from SEM observation. Gas-evolving behavior of lignocresol was measured using thermogravimetry-mass spectrometry (TG-MS). The gaseous products evolved from lignocresol included a number of fragments with higher molecular weights; whereas those from phenolic resin are mainly due to phenol and methylphenol. These evolved pyrolysis fragments effectively contribute to micropore formation of carbonized lignocresol membranes. Gas permeation rates through the membrane decreased in the order of increasing kinetic molecular diameter of the penetrant gas, and the membrane behaved like a molecular sieve. The permeation properties were dependent on heating conditions, and a pyrolysis temperature of 600°C gave the best membrane performance. Gas selectivities of the membrane prepared at 600°C were 50, 8, 290, and 87 for CO₂/N₂, O₂/N₂, H₂/CH₄, and CO₂/CH₄ at 35°C, respectively.