Concentrations of heavy metals and aquatic macrophytes of Govind Ballabh Pant Sagar an anthropogenic lake affected by coal mining effluent

Five heavy metals Cu, Cd, Mn, Pb and Hg were found in high concentration from three sampling sites located in Asia’s largest anthropogenic lake Govind Ballabh Pant GBP Sagar. Concentrations of these heavy metals were measured in Water, bottom sediment and in different parts of the aquatic macrophytes collected from the reservoir. Plants collected from the lake were Eichhornia crassipes, Azolla pinnata, Lemna minor, Spirodela polyrrhiza, Potamogeton pectinatus, Marsilea quadrifolia, Pistia stratiotes, Ipomea aquqtica, Potamogeton crispus, Hydrilla verticillata and Aponogeton natans. These plants have shown the high concentrations of Cu, Cd, Mn, Pb and Hg in their different parts due to bioaccumulation. In general plant roots exhibited higher concentrations of heavy metals than corresponding sediments. A comparison between different morphological tissues of the sampled plants reveled the metal concentration in following order roots > leaves. Analyses of bottom sediment indicated the higher concentrations of Cd, Mn, Cu and Pb. Strong positive correlations were obtained between the metals in water and in plants as well as between metal in sediment and in plants. Indicating the potential of these plants for pollution monitoring of these metals.     

Hydrographic characterization of southeast Arabian Sea during the wane of southwest monsoon and spring intermonsoon

Seasonal variation of the hydrography along the southeast Arabian Sea is described using data collected onboard FORV Sagar Sampada in September–October 2003 (later phase of Southwest monsoon, SWM) and March–April 2004 (Spring inter monsoon, SIM). During the later phase of the SWM, upwelling was in the withdrawal phase and the frontal structure was clearer in the northern sections (13 and 15°N lat) indicating strong upwelling in the area. The driving force of upwelling is identified as the combination of alongshore wind stress and remote forcing with a latitudinal variability. Although a more prominent upwelling was found in the north, a maximum surface Chlorophyll-a was found in the south (10°N). During the SIM, the area was characterized by oligotrophic water with relatively high Sea Surface Temperature (>29°C) and low salinity (33.8 to 35.4). During March, the surface hydrography was found to be controlled mainly by the intrusion of low-saline waters from the south, while during September by the high saline water from the north. The presence of various water masses [Arabian Sea High Salinity Water (ASHSW), Persian Gulf Water (PGW), Red Sea Water (RSW)] and their seasonal variations in the region is discussed and their decreasing influence towards the south is noted during both periods of observation. During the SWM, the dynamic topography showed the equator-ward flow of the West India Coastal Current (WICC) at the surface and a pole-ward coastal under current at sub-thermocline depth. During the SIM, surface circulation revealed the WICC flowing pole-ward north of 13°N, but equator-ward flow in the south, with a clockwise circulation around the Lakshadweep High.     

Persistence and vertical distribution of termiticide fipronil in modified ground board test

Fipronil termiticide belongs to phenyl-pyrazole class of chemical compounds. It has broad-spectrum activity particularly against house hold pests such as cockroaches, mosquitoes, locusts, ticks, and fleas at both larval and adult stages. At high dosage it can be used to control subterranean termites in building foundations. To evaluate long term efficacy against termites the persistence and vertical distribution of fipronil was studied under natural weather conditions of Dehradun, India. Fipronil was applied at four concentrations i.e. 0.05, 0.1, 0.25 and 0.5% a.i ha⁻¹ by drenching 17 × 17 in.² plot prepared as per modified ground board test. Soil samples were collected after 22, 38 and 56 months of treatment up to the depth of 75 cm. The soil core was cut into five distinct sections i.e. 0–15, 15–30, 30–45, 45–60 and 60–75 cm depth. The residues were extracted by shaking 20 g soil sample with acetone. The acetone extract was concentrated and cleaned-up over florisil column. Fipronil residues were estimated on GLC at 220, 260, and 300°C oven, injector and detector temperature respectively. Fipronil was found to persist beyond 56 months after application. Two metabolites viz. desulfinyl and sulfide-fipronil were detected in sampling after 22 months of application that also dissipated with time. Fipronil residues were found up to 60 cm depth. The residues in deeper layers dissipate slowly with time and after 56 months of treatment residues were detected only up to 30 cm depth.     

Contamination of nitrate and fluoride in ground water along the Ganges Alluvial Plain of Kanpur district, Uttar Pradesh, India

Nitrate-N and Fluoride concentrations were analyzed in shallow and unconfined ground water aquifers of Kanpur district along the Ganges Alluvial Plain of Northern India. Kanpur district was divided into three zones namely, Bithore, Kanpur City and Beyond Jajmau and sampling was carried out three seasons (summer, monsoon and winter). The data set consisted of the results of water samples from around 99 India Mark II hand Pumps, which were analyzed for summer monsoon and winter seasons. In Bithore zone, 19% of the samples exceeded the BIS (Bureau of India Standards) limit 10.2 mg/l as nitrate-N and as high as 166 mg/l as nitrate-N was observed. 10% and 7% samples in Kanpur city and beyond Jajmau zone respectively, exceeded the BIS limit. The Frequency distribution histogram of nitrate-N revealed a skewed (non-normal) distribution. Both point and non-point sources contribute to the ground water contamination. Especially in Bithore zone, the point sources could be attributed to the animal wastes derived from cows and buffaloes and non point sources could be due to the extensive agricultural activity prevalent in that area. Fluoride concentration in most samples was within the BIS maximum permissible level of 1.5 mg/l. No significant seasonal variation in water quality parameters was observed.     

Organochlorine insecticide residues in Ganga river water near Farrukhabad,India

Multiple residues of organochlorine insecticides were monitored in Ganga river water in the district of Farrukhabad in northern Indian for one year (1991–1992). Almost all the samples were found to be contaminated with residues of HCH and DDT. Residues of aldrin, endosulfan and heptachlor were also detected in a larger number of samples. Alpha-HCH, pp-DDT and alpha-endosulfan were found to dominate over the other isomers of HCH, DDT and endosulfan, respectively. Enhanced percentage of beta-HCH suggests accumulation of this isomer in the aquatic environment. The average concentration of aldrin was more than that of dieldrin. Aldrin residues often exceeded the WHO guideline value for drinking water and the concentration of heptachlor occasionally exceeded the specified limits.     

A review on calcium-rich industrial wastes: a sustainable source of raw materials in India for civil infrastructure—opportunities and challenges to bond circular economy

Journal of Material Cycles and Waste Management - This study provides an overview of calcium rich industrial wastes usage in construction materials, their properties and different applications...     

Preparation and characterization of bio-composite films obtained from coconut coir and groundnut shell for food packaging

Journal of Material Cycles and Waste Management - A great deal of focus has been given to finding a bio-composite film to substitute petroleum-based synthetic plastic in recent years. Many animals...     

Two-dimensional hybrid perovskite solar cells: a review

The production of electricity is important, suitable and secure for human living, yet electricity is actually generated mainly from fossil fuels and nuclear energy, calling for renewable energies such as solar, wind and tidal renewable energies such as solar, wind and tidal. Solar energy is broadly harvested by various types of solar cells. Three-dimensional perovskite solar cell exhibits high power conversion efficiency of 25.2% with low stability, whereas two-dimensional perovskite solar cell exhibits better stability with moderate power conversion efficiency. Hence, we review two-dimensional perovskite solar cells fabricated with varying numbers of hybrid two-dimensional perovskite layers, organic cations, deposition techniques, the addition of additives and capping layers to improve power conversion efficiency with long-term better stability.

     

Optimum techno-eco performance requisites for vacuum annulus tube collector–assisted double-slope solar desaltification unit integrated modified parabolic concentrator

Environmental Science and Pollution Research - This work presents a novel approach for a double-slope solar desaltification system having parallel array of evacuated annular tube collectors with...