Coefficient of friction,walking speed and cadence on slippery and dry surfaces: shoes with different groove depths

Objective. The present study aimed to determine the coefficient of friction (COF), walking speed (WS) and cadence while walking on slippery and dry surfaces using shoes with different sole groove depths to predict likelihood of fall. Background. Design of shoe sole groove is crucial to prevent slipping during walking. Methods. 22 healthy young men (mean age 24.5, body mass index 22.5) volunteered for this semi-experimental study. Six different conditions of the test (combination of three shoes and two surfaces) were defined and the condition was repeated three times. In total, 396 trials (22 subjects?×?3 groove depths?×?2 surfaces?×?3 times) were obtained for data analysis. COF was recorded by force platform at 1000?Hz and walking parameters recorded using 3D motion analysis with six infrared cameras at 200?Hz. Results. The highest COF was obtained from the deepest groove depth (5.0?mm) on both dry and slippery surfaces. The COF on slippery surfaces was significantly lower in comparison with dry surfaces. WS and cadence were not significantly different on dry and slippery surfaces. Conclusion. The deeper groove is better to prevent slipping because the COF increases by increasing the shoe sole groove depth. WS did not change on dry and slippery surfaces.     

GIS‐Based Predictive Models of Hillslope Runoff Generation Processes1

Abstract: Successful nonpoint source pollution control using best management practice placement is a complex process that requires in‐depth knowledge of the locations of runoff source areas in a watershed. Currently, very few simulation tools are capable of identifying critical runoff source areas on hillslopes and those available are not directly applicable under all runoff conditions. In this paper, a comparison of two geographic information system (GIS)‐based approaches: a topographic index model and a likelihood indicator model is presented, in predicting likely locations of saturation excess and infiltration excess runoff source areas in a hillslope of the Savoy Experimental Watershed located in northwest Arkansas. Based on intensive data collected from a two‐year field study, the spatial distributions of hydrologic variables were processed using GIS software to develop the models. The likelihood indicator model was used to produce probability surfaces that indicated the likelihood of location of both saturation and infiltration excess runoff mechanisms on the hillslope. Overall accuracies of the likelihood indicator model predictions varied between 81 and 87% for the infiltration excess and saturation excess runoff locations respectively. On the basis of accuracy of prediction, the likelihood indicator models were found to be superior (accuracy 81‐87%) to the predications made by the topographic index model (accuracy 69.5%). By combining statistics with GIS, runoff source areas on a hillslope can be identified by incorporating easily determined hydrologic measurements (such as bulk density, porosity, slope, depth to bed rock, depth to water table) and could serve as a watershed management tool for identifying critical runoff source areas in locations where the topographic index or other similar methods do not provide reliable results.     

Cytotoxic effects of seven Tunisian hospital wastewaters on the proliferation of human breast cancer cell line MDA-231: correlation with their chemical characterization

Environmental Science and Pollution Research - Hospital wastewaters contain large amounts of pharmaceutical residues, which may eventually be discharged into the aquatic environment through...     

Air quality in Yanbu,Saudi Arabia

Yanbu, on the Red Sea, is an affluent Saudi Arabian industrial city of modest size. Substantial effort has been spent to balance environmental quality, especially air pollution, and industrial development. We have analyzed six years of observations of criteria pollutants O₃, SO₂, particles (PM_2.5 and PM₁₀) and the known ozone precursors—volatile organic compounds (VOCs) and nitrogen oxides (NO_x). The results suggest frequent VOC-limited conditions in which ozone concentrations increase with decreasing NO_x and with increasing VOCs when NO_x is plentiful. For the remaining circumstances ozone has a complex non-linear relationship with the VOCs. The interactions between these factors at Yanbu cause measurable impacts on air pollution including the weekend effect in which ozone concentrations stay the same or even increase despite significantly lower emissions of the precursors on the weekends. Air pollution was lower during the Eids (al-Fitr and al-Adha), Ramadan and the Hajj periods. During Ramadan, there were substantial night time emissions as the cycle everyday living is almost reversed between night and day. The exceedances of air pollution standards were evaluated using criteria from the U.S. Environmental Protection Agency (EPA), World Health Organization (WHO), the Saudi Presidency of Meteorology and Environment (PME) and the Royal Commission Environmental Regulations (RCER). The latter are stricter standards set just for Yanbu and Jubail. For the fine particles (PM_2.5), an analysis of the winds showed a major impact from desert dust. This effect had to be taken into account but still left many occasions when standards were exceeded. Fewer exceedances were found for SO₂, and fewer still for ozone. The paper presents a comprehensive view of air quality at this isolated desert urban environment.

Implications: Frequent VOC-limited conditions are found at Yanbu in Saudi Arabia that increase ozone pollution if NO_x is are reduced. In this desert environment, increased nightlife produces the highest levels of VOCs and NO_x at night rather than the day. The effects increase during Ramadan. Fine particles peak twice a day—the morning peak is caused by traffic and increases with decreasing wind, potentially representing health concerns, but the larger afternoon peak is caused by the wind, and it increases with increasing wind speeds. These features suggest that exposure to pollutants must be redefined for such an environment.     

Treatment process and toxicities assessment of wastewater issued from anaerobic digestion of household wastes

Modern society grapples with large amounts of household waste. The anaerobic digestion of this waste offers a promising source for energy-rich biogas production but generates high toxic effluents that require treatment before reuse or disposal into the environment. This study aimed to investigate three techniques, namely coagulation/flocculation, electro-coagulation, and activated sludge, in terms of efficiency in the treatment of these effluents. It also aimed to assess their toxicity effects on the germination and growth of durum wheat Triticum aestivum L. seeds before and after 6 days of treatment. Activated sludge was most efficient in reducing chemical oxygen demand, turbidity, and conductivity (95.7 %, 15.8 %, and 37.5 %, respectively). The effluent treated with this technique induced a marked delay in germination (low mean time of germination) and a significant reduction in the percentages of seed germination and root and leaf growths. It was also noted to strongly induce lipid peroxidation in roots and leaves, which presumably explained the germination/growth inhibition of the wheat seeds. The effluent also induced marked lipid peroxidation effects and strongly inhibited the activities of butyrylcholinesterase in mice bone marrows. The effluent shows a high ability to inhibit the growth of three microalgae; these endpoints are useful tools to biomonitor the physico-chemical quality of this wastewater. Overall, while no significant alterations were observed in terms of animal and vegetable toxicities when the effluent was treated by coagulation/flocculation, activated sludge treatment proved efficient in reducing the toxicities induced by the untreated effluents. The results indicate that the application of this technique is promising with regards to attaining efficient, eco-friendly, and cost-effective strategies for the management and treatment of household waste.     

Organic contamination of Italian and Tunisian culinary herbs and spices

Contaminants belonging to various classes, as polychlorobiphenyls, polycyclic aromatic hydrocarbons, organochlorine pesticides, organophosphorous pesticides, pyrethroid insecticides, fungicides, herbicides, synergists, carbamates, acaricides and insect growth regulators were simultaneously analysed by GC-MS/MS in 118 Italian and Tunisian culinary herbs and spices. The results obtained in Italian samples shown that laurel samples were the most contaminated with the presence of 15 residues on 140, whereas in rosemary (max value of 35?ng/g for cis-chlorfenyvinphos) and oregano (max value of 118.16?ng/g for ethion) some occasional residues can be observed, but always lower than the maximum residue levels; all the others samples shown no contamination. Among Tunisian samples, only rosemary contains a notably high content of pollutants exceeded the EU maximum residue limits (i.e., alachlor and phosalone with level of 359.2 and 43.3?ng/g, respectively), while oregano was determined to be free of contaminant residues. Considering the comparison among the different organic pollutants in Italian and Tunisian spices and herbs evaluated and the differences observed in this study a harmonization of regulation on contaminant residues in herbs and spices for human consumption should be needed, considering their increased use in diet and cooking.     

Phytoextraction of heavy metals from contaminated soil,water and atmosphere using ornamental plants: mechanisms and efficiency improvement strategies

Environmental Science and Pollution Research - Accumulation of heavy metals (HMs) in soil, water and air is one of the major environmental concerns worldwide, which mainly occurs due to...     

Degradation and detoxification of acid orange 52 by <Emphasis Type="Italic">Pseudomonas putida</Emphasis> mt-2: a laboratory study

Introduction  

Acid orange 52 (AO52), extensively used in textile industries, was decolorized by Pseudomonas putida mt-2. AO52 azoreduction products such as N,N′-dimethyl-p-phenylenediamine (DMPD) and 4-aminobenzenesulfonic acid (4-ABS), were identified in the static degradation mixture. These amines were identified only in media of static incubation, which is consistent with their biotransformation under shaken incubation (aerobic conditions).     

Determination photostability of selected agrochemicals in water and soil.

The photolysis of selected pesticides in aqueous solutions has been investigated. The photolysis produced different intermediate substances, which were also found to be soil and microbial degradation products. The phototransformation in the presence of TiO2 and humic substances leads to a disappearance of these compounds. The reaction rate is dependent on the semiconductor oxide and concentration. Photoproducts were isolated and characterized by different spectroscopic methods. Results from this study indicate that degradation products of isoproturon are more toxic on Daphnia magna than on the parent compound.