Soil carbon stock estimations: methods and a case study of the Maranhão State,Brazil

Environment, Development and Sustainability - Soils feature significant variations in soil carbon stocks through land-use changes, management practices, and intrinsic characteristics. The aim of...     

Structured photocatalytic systems: photocatalytic coatings on low-cost structures for treatment of water contaminated with micropollutants—a short review

Environmental Science and Pollution Research - The persistence of many micropollutants in water and wastewater is of great concern to the contemporary scientific community. Several types of...     

Permanent aggregations of a pelagic predator at shallow seamounts

The effectiveness of marine reserves for highly mobile reef fishes such as jacks and trevallies is normally assumed to be small, even though we generally lack the understanding of their long-term movement patterns. In this work, we combined the analysis of multi-year landings and underwater visual census with acoustic telemetry to investigate the long-term movement patterns (up to 4 years) of almaco jack, Seriola rivoliana, a large reef top predator, in one protected and one unprotected offshore shallow seamount in the Azores, central North Atlantic. Although the analysis of visual census and landing data suggests a pronounced seasonal pattern of occurrence, we found that tagged fish were almost continuously detected at the seamounts for up to four consecutive years. Some individuals showed a few long periods of undetection of 1–2 months in the Formigas reserve, mostly in the fall and winter. Mobility within this seamount increased during spring and summer, and geostrophic current speed was negatively correlated with detection probability. Overall, the acoustic telemetry results showed that adult almaco jacks were resident year-round, refuting the traditional view that these fish are essentially migratory and a seasonal occurrence in the Azores. Given the intrinsic vulnerability of resident fish to fishing, our results highlight the importance of protecting these sites in order to preserve these mature fish aggregations with high reproductive potential.     

Aspergillus sclerotiorum lipolytic activity and its application in bioremediation of high-fat dairy wastewater environments

Oils and grease (O&G) have low affinity for water and represent a class of pollutants present in the dairy industry. Enzyme-mediated bioremediation using biocatalysts, such as lipases, has shown promising potential in biotechnology, as they are versatile catalysts with high enantioselectivity and regioselectivity and easy availability, being considered a clean technology (white biotechnology). Specially in the treatment of effluents from dairy industries, these enzymes are of particular importance as they specifically hydrolyze O&G. In this context, the objective of this work is to prospect filamentous fungi with the ability to synthesize lipases for application in a high-fat dairy wastewater environment. We identified and characterized the fungal species Aspergillus sclerotiorum as a good lipase producer. Specifically, we observed highest lipolytic activity (20.72 U g⁻¹) after 96 h of fermentation using sunflower seed as substrate. The fungal solid fermented was used in the bioremediation in dairy effluent to reduce O&G. The experiment was done in kinetic from 24 to 168 h and reduced over 90% of the O&G present in the sample after 168 h. Collectively, our work demonstrated the efficiency and applicability of fungal fermented solids in bioremediation and how this process can contribute to a more sustainable wastewater pretreatment, reducing the generation of effluents produced by dairy industries.

     

Analytical Investigations on a Releasing Agent Application in Aluminium Diecasting (6 pp)

Background, Aims and Scope Releasing agents, applied in the aluminium diecasting process, usually consist of water, oils, waxes, polysiloxanes, as well as of a set of additives like emulsifiers, corrosion inhibitors, and biocides. During spray application and part release, gases and aerosols are emitted into workplace air. The chemical compositions of these emissions are determined by the components of the releasing agents and their reaction products formed during thermal stress of more than 700 °C. In the frame of the joint project, the analytical tasks were to develop an appropriate sampling strategy for this production environment, to draw conclusions about the occurrence of hazardous chemicals from production plant studies and from laboratory-scale thermolysis experiments, and to determine the biodegradability of customary releasing agents. Methods During realistic test production, active air sampling was performed in a production hall using different adsorption materials. Cotton fabric sheets were positioned in the production area as passive samplers. Thermolysis experiments were performed at 600 °C with sealed quartz ampoules. The biodegradability of different releasing agents was determined according to German industry standard DIN 51828 (2000). For analyses, GC/MS (headspace), FTIR, HPLC, IC, and ICP-OES techniques were applied. Results and Discussion The substance spectrum, which was found in workplace air, was dominated by saturated and non-saturated aliphatic hydrocarbons. Besides these, alcohols, alkyl phenols, xylenes and other benzene derivatives, aldehydes, glycols, carboxylic acid esters, and amides were present. The German limiting value of 40 mg/m3 of complex hydrocarbon mixtures in a diecasting workplace atmosphere was clearly under-run. Total hydrocarbon contents ranged between 2.7 and 6.3 mg/m3. Five different PAH were found in the air close to the diecasting machine, with maximum concentrations between 0.05 and 3.06 μg/m3. Concentrations of nonylphenols ranged from 10 to 200 μg/m3, and those of triethanolamine from 20 to 30 μg/m3. From 17 elements analyzed, only B, Fe, P, S, Si, and Ti were emitted in small amounts. It was striking that the PAH patterns resulting from thermolysis experiments were quite the same compared to those determined during the diecasting process. An influence of water and of Fe/Al on the composition of the thermolysis products could mostly be shown. The degrees of biodegradation of three releasing agent extracts after 21 days were 21%, 29%, and 55%, respectively. Conclusion A sampling strategy was developed, which allows an emission assessment for the industrial process of aluminium diecasting. It enabled one to control limiting values, to characterise a wide variety of compounds emitted, and to identify and quantify relevant pollutants. Only a few hazardous substances could be detected during the exemplary use of one releasing agent within the compounds emitted into workplace air. Indications were found, that the prediction of the formation of harmful substances from releasing agent components should be possible via thermolysis experiments. The biodegradability test can serve to assess the expenditure of disposal of the usual leakage run-off of excess agent during production. Recommendation and Outlook Investigations on further differently composed releasing agents, e.g. powders, would be desirable. A substitution of nonylphenol ethoxylates by less harmful components would surely be an improvement of a releasing agent with regard to work safety and health care, because of avoiding the emission of toxic and endocrine active nonylphenols. The surprisingly wide range of biodegradability of the investigated releasing agents points to an optimization potential, that has obviously not yet been considered.     

Effects of chronic and subtoxic chlorobenzenes on adrenocorticotrophic hormone release

Many environmental chemicals and pesticides have been found to alter neuroendocrine communication in exposed biological objects. The environmental loads have primary and secondary effects that can alter the homeostatic regulation potential. Since it is difficult to avoid human exposition, a potentially important area of research to develop in vivo and in vitro experimental models. In this context, the primary aim of this study was to demonstrate the effects of chlorobenzenes on adrenocorticotrophic hormone (ACTH) release. In our experimental study, male Wistar rats were exposed to 0.1, 1.0 and 10 μg/b.w. (body weight) kg of 1,2,4- trichlorobenzene and hexachlorobenzene (ClB) mix via gastric tube for 30, 60 or 90 days. At the endpoints of the experiment blood samples were taken and animals were decapitated. Primary, monolayer adenohypophysis cell cultures were prepared by enzymatic and mechanical digestion. The ACTH hormone content in serum and supernatant media was measured by immuno-chemiluminescence assay. The Mg^2 +-dependent ATPase activity was determined by modified method of Martin and Dotty. Significant differences were detected in the hormone release between the control and treated groups. The hormone release was enhanced characteristically in exposed groups depending upon the dose and duration of exposure. The Mg^2 +-ATPase activity enhanced after chronic and subtoxic ClB exposition. Light microscopy revealed that the adenohypophysis seemed to be more abundant. Results indicate that Wistar rats exposed to subtoxic ClB have direct and indirect effects on hypothalamus–hypophysis–adrenal axis.     

Living in a “stethoscope”: burrow-acoustics promote auditory specializations in subterranean rodents

Subterranean mammals rely to a great extent on audition for communication and to be alerted to danger. The only hitherto published report on burrow acoustics revealed that in tunnels of blind mole-rats (Spalax ehrenbergi), airborne sounds of 440 Hz propagated best whereas lower and higher frequencies were effectively attenuated. Morpho-functional analyses classify the ear of subterranean mammals as a low-sensitivity and low-frequency device. Concordantly, hearing is characterized by low sensitivity and a restricted frequency range tuned to low frequencies (0.5–4 kHz). Some authors considered the restricted hearing in subterranean mammals vestigial and degenerate due to under-stimulation. In contrast to this view stand a rich (mostly low-frequency) vocal repertoire and progressive structural specializations of the middle and inner ear. Thus, other authors considered these hearing characteristics adaptive. To test the hypothesis that acoustical environment in burrows of different species of subterranean mammals is similar, we measured sound attenuation in burrows of Fukomys mole-rats (formerly known as Cryptomys, cf. Kock et al. 2006) of two differently sized species at different locations in Zambia. We show that in these burrows, low-frequency sounds (200–800 Hz) are not only least attenuated but also their amplitude may be amplified like in a stethoscope (up to two times over 1 m). We suggest that hearing sensitivity has decreased during evolution of subterranean mammals to avoid over-stimulation of the ear in their natural environment. We dedicate this work to Mathias Kawalika, who died in March 2006.     

Improving an algorithm for classifying error types of front-line workers: Insights from a case study in the construction industry

The objective of this study was to propose improvements in an algorithm for classifying error types of front-line workers. The improvements involved: (a) making recommendations on organizing the data needed to apply the algorithm (e.g. identify actions and decisions that may serve as a reference for analysing the types of errors) and (b) drawing up guidelines for interpreting the questions that are part of the algorithm (e.g. how to define what counts as a procedure). The improvements were identified on the basis of testing the algorithm on construction sites, an environment in which it had not yet been implemented. Thus, 19 occupational accidents which had occurred in a small-sized construction company were investigated and the error types of both workers who had been injured and crew members were classified. The accidents investigated were used as a basis both to illustrate how the improvements proposed should be put in practice and to illustrate how practical insights for safety management might be derived from the algorithm.