Ozone and forests in South-Western Europe--What have we learned?

Monitoring of forest condition and ozone (O3) at 83 sites in France, Italy, Luxenbourg, Spain and Switzerland resulted in a number of findings in relation to the knowledge of O3 exposure (concentration and cumulative AOT40), feasibility of the assessment of stomatal O3 flux and relationships between O3 and crown defoliation of beech and visible symptoms on native vegetation. However, the project provides evidence of issues to be addressed within the current monitoring system (data quality, validation sites and response indicators) and indications as to how the monitoring of O3 risk in the context of an effect-oriented monitoring program can be improved.     

Slurry wall containment performance: monitoring and modeling of unsaturated and saturated flow

A specific 2-year program to monitor and test both the vadose zone and the saturated zone, coupled with a numerical analysis, was performed to evaluate the overall performance of slurry wall systems for containment of contaminated areas. Despite local physical confinement (slurry walls keyed into an average 2-m-thick aquitard), for at least two decades, high concentrations of chlorinated solvents (up to 110 mg l^− 1) have been observed in aquifers that supply drinking water close to the city of Milan (Italy). Results of monitoring and in situ tests have been used to perform an unsaturated-saturated numerical model. These results yielded the necessary quantitative information to be used both for the determination of the hydraulic properties of the different media in the area and for the calibration and validation of the numerical model. Backfill material in the shallower part of the investigated aquifer dramatically affects the natural recharge of the encapsulated area. A transient simulation from wet to drought periods highlights a change in the ratio between leakages from lateral barriers that support a specific scenario of water loss through the containment system. The combination of monitoring and modelling allows a reliable estimate of the overall performance of the physical confinement to be made without using any invasive techniques on slurry wall.     

Congener profiles of polychlorinated biphenyls in core sediments of Sunderban mangrove wetland (N.E. India) and their ecotoxicological significance

The paper presents the first comprehensive survey of congener profiles of polychlorinated biphenyls (PCBs) in core sediment samples (<63 microm particle size) covering seven sites in Sunderban mangrove Wetland, north-eastern part of the Bay of Bengal. Results pointed out a non-homogenous contamination of the wetland with Sigma23PCB values ranging from 0.5 to 26.9 ng g(-1) dry weight, reflecting very low to moderate contamination closely in conformity to other Asian coastal environment. The general decreasing order of the dominant congeners to the total load was: CB138 > 153 > 149 > 101, indicating the predominance of hexa-chlorinated congeners. The spatial distribution revealed significant differences in concentration related to local urbanization with industrial and land-based sources. No uniform temporal trend on PCB levels was recorded probably due to particular hydrological characteristics of the wetland and/or non-homogenous inputs from point sources. Strong positive correlations between the seven dominant congeners suggest their common sources and similar environmental behaviors. These results were also used for a risk assessment evaluation in the Sunderban wetland, showing that the present PCB levels were exceeding in few cases the lower limit of sediment quality guidelines of Environmental Protection Agency and Canadian Council of Ministers of the Environment.     

Towards a sampling strategy for the assessment of forest condition at European level: combining country estimates

A correct characterization of the status and trend of forest condition is essential to support reporting processes at national and international level. An international forest condition monitoring has been implemented in Europe since 1987 under the auspices of the International Co-operative Programme on Assessment and Monitoring of Air Pollution Effects on Forests (ICP Forests). The monitoring is based on harmonized methodologies, with individual countries being responsible for its implementation. Due to inconsistencies and problems in sampling design, however, the ICP Forests network is not able to produce reliable quantitative estimates of forest condition at European and sometimes at country level. This paper proposes (1) a set of requirements for status and change assessment and (2) a harmonized sampling strategy able to provide unbiased and consistent estimators of forest condition parameters and of their changes at both country and European level. Under the assumption that a common definition of forest holds among European countries, monitoring objectives, parameters of concern and accuracy indexes are stated. On the basis of fixed-area plot sampling performed independently in each country, an unbiased and consistent estimator of forest defoliation indexes is obtained at both country and European level, together with conservative estimators of their sampling variance and power in the detection of changes. The strategy adopts a probabilistic sampling scheme based on fixed-area plots selected by means of systematic or stratified schemes. Operative guidelines for its application are provided.     

Raw sugarcane bagasse as carbon source for xylanase production by Paenibacillus species: a potential degrader of agricultural wastes

Environmental Science and Pollution Research - Paenibacillus species isolated from a variety of natural sources have shown to be important glycoside hydrolases producers. These enzymes play a key...     

Real-world emissions of in-use off-road vehicles in Mexico

Off-road vehicles used in construction and agricultural activities can contribute substantially to emissions of gaseous pollutants and can be a major source of submicrometer carbonaceous particles in many parts of the world. However, there have been relatively few efforts in quantifying the emission factors (EFs) and for estimating the potential emission reduction benefits using emission control technologies for these vehicles. This study characterized the black carbon (BC) component of particulate matter and NOx, CO, and CO₂ EFs of selected diesel-powered off-road mobile sources in Mexico under real-world operating conditions using on-board portable emissions measurements systems (PEMS). The vehicles sampled included two backhoes, one tractor, a crane, an excavator, two front loaders, two bulldozers, an air compressor, and a power generator used in the construction and agricultural activities. For a selected number of these vehicles the emissions were further characterized with wall-flow diesel particle filters (DPFs) and partial-flow DPFs (p-DPFs) installed. Fuel-based EFs presented less variability than time-based emission rates, particularly for the BC. Average baseline EFs in working conditions for BC, NOx, and CO ranged from 0.04 to 5.7, from 12.6 to 81.8, and from 7.9 to 285.7 g/kg-fuel, respectively, and a high dependency by operation mode and by vehicle type was observed. Measurement-base frequency distributions of EFs by operation mode are proposed as an alternative method for characterizing the variability of off-road vehicles emissions under real-world conditions. Mass-based reductions for black carbon EFs were substantially large (above 99%) when DPFs were installed and the vehicles were idling, and the reductions were moderate (in the 20–60% range) for p-DPFs in working operating conditions. The observed high variability in measured EFs also indicates the need for detailed vehicle operation data for accurately estimating emissions from off-road vehicles in emissions inventories.

Implications: Measurements of off-road vehicles used in construction and agricultural activities in Mexico using on-board portable emissions measurements systems (PEMS) showed that these vehicles can be major sources of black carbon and NO_X. Emission factors varied significantly under real-world operating conditions, suggesting the need for detailed vehicle operation data for accurately estimating emissions inventories. Tests conducted in a selected number of sampled vehicles indicated that diesel particle filters (DPFs) are an effective technology for control of diesel particulate emissions and can provide potentially large emissions reduction in Mexico if widely implemented.     

Spring and autumn spatial distribution of zooplankton carbon requirement across the Mediterranean Sea

Zooplankton represents a key contributor to the ocean biological pump through its consumption of sinking and suspended carbon. A specific and highly sensitive method to evaluate zooplankton carbon requirement from the sinking flux is through the estimation of the activity of the electron transport system. The present study was carried out from samplings in 2006, and it was focused on the spatial 200–0?m zooplankton carbon demand across 24 sampling stations, along the Mediterranean Sea, from the island of Crete to the Strait of Gibraltar. Its potential day/night variability was evaluated. The zooplankton composition, abundance and biomass were investigated. The carbon demand per unit zooplankton biomass indicates geographical and diel differences among the sampling stations. A higher mean carbon demand was seen for the western Mediterranean with respect to the eastern Mediterranean, which can be justified through the observed ratio of gelatinous:crustacean taxa and the water temperatures recorded. Higher carbon demand was measured in samples collected during the dark hours. The relation to the presence and abundance of actively migrating euphausiids and copepods was discussed. A comparison with data from another of our study carried out in the same study area but in another seasonal period was done.     

The Effect of Extraction Conditions on the Chemical Characteristics of Pectin from Opuntia ficus indica Cladode Flour

Pectin from the cladode flour of Opuntia ficus indica was extracted at different ethylenediaminetetraacetate concentrations (10 or 20 %), temperatures (40 or 80 °C), pH values (2 or 11), and times (10, 20, 30 40, 50 or 60 min). The effects of the extraction conditions on the yield, purity, and chemical composition of pectin were assessed. The highest pectin yield was observed for pectin obtained under alkaline conditions and 20 % of EDTA. However, pectin produced from alkaline extractions had a lower content of GalA than pectin produced from acid extractions. Higher temperatures favored the extraction of pectin under acid conditions, but these conditions diminished the arabinose content of pectins in a time-dependent manner. The tested extraction conditions caused only slight changes in the molecular weight of the extracted pectin as a function of time.     

Chemical composition and surfactant characteristics of marine foams investigated by means of UV-vis,FTIR and FTNIR spectroscopy

In this study, we collected the ultraviolet–visible (UV-vis), Fourier transform infrared (FTIR) and Fourier transform near-infrared (FTNIR) spectra of marine foams from different sites and foams produced by marine living organisms (i.e. algae and molluscs) to retrieve information about their molecular and structural composition. UV-vis spectra gave information concerning the lipid and pigment contents of foams. FTIR spectroscopy gave a more detailed qualitative information regarding carbohydrates, lipids and proteins in addition with information about the mineral contents of foams. FTNIR spectra confirmed the presence of carbohydrates, lipids and proteins in foams. Then, due to the higher content of structural information of FTIR spectroscopy with respect to FTNIR and UV-vis, we join the FTIR spectra of marine foams to those of humic substance from marine sediments and to the spectra of foams obtained by living organisms. We submitted this resulting FTIR spectral dataset to statistical multivariate methods to investigate specific aspects of foams such as structural similarity among foams and in addition, contributions from the organic matter of living organisms. Cluster analysis (CA) evidenced several cases (i.e. clusters) of marine foams having high structural similarity with foams from vegetal and animal samples and with humic substance extracted from sediments. These results suggested that all the living organisms of the marine environment can give contributions to the chemical composition of foams. Moreover, as CA also evidenced cases of structural differences within foam samples, we applied two-dimensional correlation analysis (2DCORR) to the FTIR spectra of marine foams to investigate the molecular characteristics which caused these structural differences. Asynchronous spectra of two-dimensional correlation analysis showed that the structural heterogeneity among foam samples depended reasonably on the presence and on the qualitative difference of electrostatic (hydrogen bonds) and nonpolar (van der Waals and π–π) interactions involving carbohydrate proteins and lipids present. The presence and relevance of these interactions agree with the supramolecular and surfactant characteristics of marine organic matter described in the scientific literature.     

Environmental concentrations of 3,4-methylenedioxymethamphetamine (MDMA)-induced cellular stress and modulated antioxidant enzyme activity in the zebra mussel

Recent monitoring studies showed measurable levels of the 3,4-methylenedioxymethamphetamine (MDMA) in aquatic environments. However, no information is currently available on its potential hazard to aquatic non-target organisms. The aim of this study was to investigate the potential sub-lethal effects induced by 14-day exposures to low MDMA concentrations (0.05 and 0.5 μg/L) to zebra mussel (Dreissena polymorpha) specimens through the application of a biomarker suite. The trypan blue exclusion method and the neutral red retention assay (NRRA) were used to assess MDMA cytotoxicity. The activity of superoxide dismutase (SOD), catalase (CAT), glutathione peroxidase (GPx), and glutathione S-transferase (GST), as well as the lipid peroxidation (LPO) and protein carbonyl content (PCC), were measured as oxidative stress indexes. The single cell gel electrophoresis (SCGE) assay, the DNA diffusion assay, and the micronucleus test (MN test) were applied to investigate DNA damage, while filtration rate was measured as physiological parameter. Despite significant decrease in lysosome membrane stability, hemocyte viability and imbalances in CAT and GST activities pointed out at the end of the exposure to 0.5 μg/L, no significant variations for the other end points were noticed at both the treatments, suggesting that environmentally relevant MDMA concentrations did not induce deleterious effects to the zebra mussel.