Prevention through design: The effect of European Directives on construction workplace accidents

Workplace accidents still occur with distressing frequency, particularly in construction. Industrialized countries have become increasingly aware of this situation and have adopted policies to attempt to deal with this issue. Such policies have led to the development of new laws and regulations with a view to improving workplace conditions.This paper first analyzes policies regarding accident prevention in the European Union, as initially stipulated in the European Framework Directive 89/391/EEC, and more specifically in Directive 92/57/EEC, on the implementation of minimum safety and health requirements at temporary or mobile construction sites, concentrating on prevention through design. Whilst designers previously had some responsibilities for reducing risk under common law provisions in many countries, this directive was the first explicit legislation to enforce particular duties upon them. The adaptation of the provisions in this directive to the national legislation of EU member countries is also studied.The second section of the paper analyzes the incidence rate of workplace accidents in the construction sector in each country from the year when these regulations came into force until the present time. Based on the evolution of these accident rates, the paper postulates the extent to which European policies have contributed to accident prevention in construction. It is now more than a decade since this legislation has been in force which provides a suitable period for a reflective analysis on it is impact.     

Valorisation of forestry waste by pyrolysis in an auger reactor

Pyrolysis of forestry waste has been carried out in an auger reactor to study the influence of operational variables on the reactor performance and the properties of the related products. Pine woodchips were used for the first time as raw material and fed continuously into the reactor. Ten experiments were carried out under inert atmosphere at: (i) different reaction temperature (1073, 973, 873, 823 and 773 K); (ii) different solid residence time (5, 3, 2 and 1.5 min); and (iii) different biomass flow rate (3.9, 4.8 and 6.9 kg/h). Results show that the greatest yields for liquid production (59%) and optimum product characterisation were obtained at the lowest temperature studied (773 K) and applying solid residence times longer than 2 min. Regarding bio-oil properties, GC/MS qualitative identification show that the most abundant compounds are volatile polar compounds, phenols and benzenediols; and very few differences can be observed among the samples regardless of the pyrolysis operating conditions. On the whole, experimental results demonstrate that complete reaction of forest woodchips can be achieved in an auger reactor in most of the experimental conditions tested. Moreover, this study presents the initial steps for the future scaling up of the auger reactor with the aim of converting it into a mobile plant which will be able to remotely process biomass such as energy crops, forestry and agricultural wastes to obtain bio-oil that, in turn, can be used as energy vector to avoid high transport costs.     

Amino-Modified Halloysite Nanotubes to Reduce Polymer Degradation and Improve the Performance of Mechanically Recycled Poly(lactic acid)

From an environmental point of view, mechanical recycling is, in general, a good end-of-life option for poly(lactic acid) (PLA), one of the most important biobased polymers. However, the degradation of PLA during the service life and, especially, during the mechanical recycling process, leads to a decrease in the properties of PLA, thus reducing the applications of the recycled plastic. The main aim of this work was to study the addition of small amounts of halloysite nanotubes, during the recycling step, as the basis of a cost-effective method for improving the properties of the recycled PLA. Raw halloysite was modified with an aminosilane, and 2% by weight of both raw and modified halloysite were melt compounded with PLA previously subjected to accelerated ageing. The addition of the nanotubes led to recycled materials with improved properties because halloysite reduces the degradation of PLA by blocking the carboxyl groups, generated during the ageing and washing steps, which catalyze the degradation during the recycling process. This effect was more intense in the silanized nanotubes, because the carboxyl groups were effectively blocked by acid–base interactions with the amino groups of the chemical modification. The properties of the recycled plastic with only 2 wt% of silanized halloysite were very close to those of the virgin plastic.     

Polycyclic aromatic hydrocarbons in air on small spatial and temporal scales – I. Levels and variabilities

Polycyclic aromatic hydrocarbons (PAHs) were measured together with inorganic air pollutants at two urban sites and one rural background site in the Banja Luka area, Bosnia and Hercegovina, during 72 h in July 2008 using a high time resolution (5 samples per day) with the aim to study the spatial and temporal variabilities and to explore the significance of averaging effects inherent to 24 h-sampling. Measurement uncertainty was quantified on basis of three independent side-by-side samplers, deployed at one of the sites.PAH abundances in the urban and rural environments differed largely. Levels at the urban sites exceeded the levels at the rural site by >100%. The discrepancy was largely dominated by emission of 3–4 ring PAHs in the city, while 5–6 ring PAHs were more evenly distributed between city sites and the hill site. During the night a higher fraction of the semivolatile PAHs might have been stored in the soil or sorbed to surfaces. PAH patterns were undistinguishable across the three sites. However, concentrations of more particle-associated substances differed significantly between the urban sites than between one of the urban sites and the rural site (3σ uncertainty). Time-averaging (on a 24 h-basis) would have masked the significant inter-site differences of half of the substances which were found at different levels (on a 4 h-basis).     

Kinetic analysis of the anaerobic digestion of untreated vinasses and vinasses previously treated with Penicillium decumbens

A kinetic study was carried out on the anaerobic digestion of untreated vinasses and vinasses previously fermented with Penicillium decumbens. Two 1-l volume continuous-flow stirred tank reactors (CFSTR) operating at mesophilic temperature (35 degrees C) were used for the study. One reactor was fed with untreated vinasses (COD concentration of 80.5 g/l) and the other with vinasses previously fermented (COD concentration of 23.0 g/l). Both reactors were operated at organic loading rates in the range of 1.5-7.5 g chemical oxygen demand (COD)/l-d. The results obtained were evaluated using the Chen-Hashimoto methane production model to determine the values of the maximum specific growth rate (micromax) and the model kinetic constant (K) of the process for each case studied. The kinetic constants (micromax and K) were affected by the pre-treatment, and the respective values were 9.6 and 6.9 times higher for pretreated vinasses than those of untreated vinasses. This was significant at the 95% confidence level. This behaviour is believed to be due to the lower levels of phenolic compounds present in the pretreated vinasses, as compared to untreated vinasses, resulting in an improved process performance, kinetics and stability. Finally, the experimental values of methane production were reproduced with deviations equal to or less than 4% and 10% for pretreated and untreated vinasses, respectively.     

A study of the natural biodegradation of two-phase olive mill solid waste during its storage in an evaporation pond

A study of the natural biodegradation of two-phase olive mill solid waste (OMSW) during its storage in an evaporation pond was carried out. This system is traditionally used as the final disposal of this waste or constitutes a previous stage before being processed by cogeneration or anaerobic digestion processes. A laboratory-scale pond with a total volume of 520 l was used. The experiment was carried out between December 2002 and August 2003 covering a total period of 269 days. During the experiment, the variations of temperature (outside and inside the pond), the effective volume of the OMSW in the pond, moisture content, total solids (TS), volatile solids (VS), the total chemical oxygen demand (TCOD), total volatile acids (TVA), pH and cumulative methane production as a function of the operation time were evaluated. The experimental results obtained showed that the characteristics of the two-phase OMSW in the pond were dependent on the time of operation and temperature. During the experiment, three periods were clearly observed and differentiated: (a) An initial period with a rapid reduction of moisture content and effective volume, with an increase of TS, VS and TCOD removals, a decrease of pH and an increase of TVA and methane production until day 21. (b) A second period of slow decrease of moisture content and effective volume, due to the decrease of the ambient temperature. This period took place between day 21 and days 120-150 of assay, and it was characterised by a slight change in the OMSW properties. (c) A third period where the characteristics of the waste in the pond changed considerably due to the increase of the temperature outside the pond. The methane gas production also showed an increase due to the increase of methanogenic activity with the increase of temperature. An empirical model to describe the changes of two-phase OMSW characteristics and methane production with the operation time was developed. The proposed model, based on the use of polynomial equations, took into account the influence of the temperature and fit adequately into the experimental results obtained. It was found that the pond could probably be used as preliminary treatment of two-phase OMSW before its anaerobic digestion process, because a maximum conversion of organic matter to TVA was obtained after an operation time of around 200 days.     

Urban soil quality of Raipur,Chhattisgarh, India

Soil quality in urban areas in India is degraded due to multiple anthropogenic activities. The objectives of this work are to determine the concentration variations, toxicity, and sources of carbons, metals, and ions in the surface soil of Raipur, the industrialized capital city of Chhattisgarh state, India. High concentrations of Al, K, Ca, Ti, Fe, and elemental carbon (EC) were registered. Relatively lower concentrations of V, Cr, Mn, Ni, Cu, Zn, Sr, Ba, Pb, organic carbon (OC), and carbonate carbon (CC), as well as ions (viz. F^–, Cl^–, NO₃^–, SO₄^2–, Na⁺, K⁺, Mg²⁺, and Ca²⁺), were also recorded. EC was found to be one of the major pollutants, although enrichment factors pointed to high contamination with SO₄^2–, K⁺, Mg²⁺_, Cr, Mn, and Pb; and extreme contamination with NO₃^– and Ca²⁺. The spatial and temporal variations, enrichment factors, toxicity, and sources of the chemical species detected in the soil are discussed.     

Determination of selected quaternary ammonium compounds by liquid chromatography with mass spectrometry. Part II. Application to sediment and sludge samples in Austria

Soxhlet extraction and high-performance liquid chromatography (HPLC) coupled to tandem mass spectrometry detection (MS/MS) was used for the determination of selected quaternary ammonium compounds (QACs) in solid samples. The method was applied for the determination of alkyl benzyl, dialkyl and trialkyl quaternary ammonium compounds in sediment and sludge samples in Austria. The overall method quantification limits range from 0.6 to 3 microg/kg for sediments and from 2 to 5 microg/kg for sewage sludges. Mean recoveries between 67% and 95% are achieved. In general sediments were especially contaminated by C12 chain benzalkonium chloride (BAC-C12) as well as by the long C-chain dialkyldimethylammonium chloride (DDAC-C18) with a maximum concentration of 3.6 mg/kg and 2.1mg/kg, respectively. Maxima of 27 mg/kg for DDAC-C10, 25 mg/kg for BAC-C12 and 23 mg/kg for BAC-C14 were determined for sludge samples. The sums of the 12 selected target compounds range from 22 mg/kg to 103 mg/kg in the sludge samples.     

Levels of metals, PCBs, PCNs and PAHs in soils of a highly industrialized chemical/petrochemical area: temporal trend

In 2005, the concentrations of various metals and organic pollutants were analyzed in soils collected in different areas of Tarragona (Catalonia, Spain), where an important chemical/petrochemical complex is located. The levels of seven elements (As, Cd, Cr, Hg, Mn, Pb and V), as well as those of polychlorinated biphenyls (PCBs), polychlorinated naphthalenes (PCNs) and polycyclic aromatic hydrocarbons (PAHs) were determined in soils, and compared with those obtained in a background study carried out in 2002. Only Cd and Pb showed significant higher concentrations in the petrochemical zone, while no significant differences were found for the remaining elements. In turn, vanadium was the only element showing a significant increase in the concentration between 2002 and 2005. With regard to the organic pollutants, no significant differences were found according to the area of sampling. However, an increase in naphthalene levels was observed during the period 2002-2005 in soils of the chemical and petrochemical areas. According to the present results, it is suggested that the levels of vanadium must be periodically monitored to assure that the important industrialization of Tarragona does not mean health risks for the population living near the complex.