Air quality and deposition of trace elements in Didouche Mourad, Algeria

Total suspended particulate matter and deposition fluxes of particles were investigated in the town of Didouche Mourad which is located 13 km north of Constantine. Samples of air particulate matter were collected at one site located in the heart of the town and situated 3 km north of a cement plant. Samples were collected from 2 November 2002 to 28 April 2003 every 3 days using a high volume air sampler. Sampling intervals were 24 h in all cases. During the same period, samples of dust fallout were collected at the same site. Samples were collected at 30-day intervals. Lead, chromium, manganese, nickel, copper, cobalt and cadmium deposition fluxes were measured and both the soluble and insoluble fractions were determined. Furthermore, the information gathered by this study was correlated with the corresponding hourly weather data provided by a weather station installed at the study station. The possible sources for dust and trace metals were analyzed by comparing average contributions of wind aspects to the concentrations and depositions of mass and chemical species with the average frequencies of wind direction. The mean concentration was 300 μg/m³. The average dust deposition rate through the period of study was 221 mg/(m².day). Results indicate that anthropogenic sources contribute greatly to trace elements. An exposure assessment to the heavy metals taking into account the inhalation route and soil dust ingestion was carried out and allowed direct comparison of trace metal intakes via these routes.     

Soil contamination of heavy metals in the Katedan Industrial Development Area, Hyderabad, India

Studies on quantitative soil contamination due to heavy metals were carried out in Katedan Industrial Development Area (KIDA), south of Hyderabad, Andhra Pradesh, India under the Indo-Norwegian Institutional Cooperation Programme. The study area falls under a semi-arid type of climate and consists of granites and pegmatite of igneous origin belonging to the Archaean age. There are about 300 industries dealing with dyeing, edible oil production, battery manufacturing, metal plating, chemicals, etc. Most of the industries discharge their untreated effluents either on open land or into ditches. Solid waste from industries is randomly dumped along roads and open grounds. Soil samples were collected throughout the industrial area and from downstream residential areas and were analysed by X-ray Fluorescence Spectrometer for fourteen trace metals and ten major oxides. The analytical data shows very high concentrations of lead, chromium, nickel, zinc, arsenic and cadmium through out the industrial area. The random dumping of hazardous waste in the industrial area could be the main cause of the soil contamination spreading by rainwater and wind. In the residential areas the local dumping is expected to be the main source as it is difficult to foresee that rain and wind can transport the contaminants from the industrial area. If emission to air by the smokestacks is significant, this may contribute to considerable spreading of contaminants like As, Cd and Pb throughout the area. A comparison of the results with the Canadian Soil Quality Guidelines (SQGL) show that most of the industrial area is heavily contaminated by As, Pb and Zn and local areas by Cr, Cu and Ni. The residential area is also contaminated by As and some small areas by Cr, Cu, Pb and Zn. The Cd contamination is detected over large area but it is not exceeding the SQGL value. Natural background values of As and Cr exceed the SQGL values and contribute significantly to the contamination in the residential area. However, the availability is considerably less than anthropogenic contaminants and must therefore be assessed differently. The pre- and post-monsoon sampling over two hydrological cycles in 2002 and 2003 indicate that the As, Cd and Pb contaminants are more mobile and may expect to reach the groundwater. The other contaminants seem to be much more stable. The contamination is especially serious in the industrial area as it is housing a large permanent residing population. The study not only aims at determining the natural background levels of trace elements as a guide for future pollution monitoring but also focuses on the pollution vulnerability of the watershed. A plan of action for remediation is recommended.     

Extraction of labile metals from solid media by dilute hydrochloric acid

Extraction of labile metals from solid media is environmentally more meaningful than a total digestion. A variety of reagents have been introduced in the literature, but dilute HCl has received the greatest attention. We compare metal concentrations liberated by a dilute HCl leach with the sum of the 3-step optimized (standardized) BCR sequential extraction procedure. This is the first study to compare these procedures over a range of grain sizes. Road-deposited sediments from 10 sites in Honolulu were fractionated into six grain size classes. Aliquots of individual fractions were digested with dilute HCl, the 3-step BCR procedure (‘labile’), and a 4-acid (total) procedure. Results indicated that the weighted labile concentrations of Al, Cu, Fe, Mn, Ni, Pb and Zn were statistically greater than those from the dilute HCl leach. However, regression analysis indicated strong statistically significant relationships between the two partial extraction procedures for all metals. On a whole-sample basis, the toxicity classifications for anthropogenic-enhanced metals (Cu, Pb and Zn) were similar between extractions. Taken together, results suggest that the application of dilute HCl to solid media provides a rapid, cost-effective, and environmentally meaningful approach for contaminant monitoring.     

Suitability assessment of groundwater for drinking, irrigation and industrial use in some North Indian villages

The study comprised suitability assessment of groundwater for drinking, irrigation, and industrial use. A total of 34 groundwater samples were collected from Rewari town and its perimeter from the land chiefly used for agriculture. Physico-chemical characterization of the samples revealed that groundwater from most of the sources was not fit for drinking owing to a high concentration of calcium, magnesium, hardness and fluoride. Suitability for irrigation, too, was low since most of the sources had high value of sodium adsorption ratio (SAR), residual sodium carbonate (RSC), soluble sodium percentage (SSP) and magnesium hazard which can render salinity and alkali hazard to soils on long term use in irrigation. No source of water was found to be suitable for industrial application since it had high concentration of calcium carbonate which can precipitate very easily. It was observed that sodium, sulphate, and chloride were the chief ions present in water and based on the abundance of ions and their correlation type, most of the groundwater samples are of sodium sulphate and/or sodium chloride type. The high concentration of the chemical constituents is attributed to the lithologic composition of the area. It was observed that the water of deep meteoric percolation type was of sodium sulphate type and the shallow of sodium chloride type.     

Metal pollution assessment of sediment and water in the Shur River

Intensified industrialization and human activities have resulted in the release of various contaminants into the environment. Among them, heavy metals are often present as a result of mining, milling and industrial manufacturing. In the present investigation, bulk concentrations Pb, Cd, Zn, Cu, Fe, Ca and Al in Shur River (Iran) bed sediments and water around the Sarcheshmeh copper mine were measured from several sample locations. In addition, partitioning was assessed to determine the proportions of metals in different forms. The degree of sediment contamination was evaluated using an Enrichment Factor (EF) and geo-accumulation index (I (geo)) and a newly developed pollution index (I (POLL)). Elevated metals in sediment and water were found to be correlated with areas of the river that were proximal to direct and indirect mining activities. Cadmium and Zn showed the highest pollution index. Cluster analysis was performed in order to assess heavy metal interactions between water and sediment. Chemical partitioning studies revealed that organic metallic bonds were not significantly present in the sediment of the Shur River.     

Multi-Criteria and Multi-Perspective Analysis of Contaminated Land Management Methods

Errors in environmental resource management over the years have created pollution problems in some areas which are difficult to handle, regardless of the development of knowledge and technologies. This is particularly true in the case of soil pollution. The negative effects of persistent pollutants have been observed for a long time. For instance, lead and cadmium remain in the soil for centuries, during which time they are absorbed by plants and simultaneously cause secondary air pollution. The authors made an attempt to describe and assess the possible options of dealing with the problem of contaminated land in Katowice District. Considering the necessity of a multilateral approach, a pairwise comparison technique has been chosen as the most suitable to show the complexity of the problem. The different variants of actions aimed at preventing the pollutants from getting into the food chain were analyzed against a set of criteria, consisting of the following issues: time, cost, effectiveness, social acceptance, feasibility. The relative importance of actions were judged by the team of experts using the Saaty method. Also, a two-perspective assessment (the two different stakeholders), which involves considering the perspective of an owner of a piece of contaminated land and an ecologist has been performed. The results of comparative, multicriteria and multi-perspective assessment indicate the following:- the best method for contaminated agricultural land management is willful and controlled cultivation,- other recommended actions are deep ploughing and phytoremediation,- there is not much acceptance for the other methods.     

Accumulation of Heavy Metals in Epiphytic Lichens Near a Municipal Solid Waste Incinerator (Central Italy)

The epiphytic lichen Parmelia caperata was usedas biomonitor in the area of a municipal solid wasteincinerator (Poggibonsi, central Italy) to investigatethe levels and the spatial distribution of the heavymetals Al, Cd, Cr, Cu, Fe, Hg, Pb and Zn. Levels ofAl, Cu and Hg were similar to those in unpollutedareas, whereas high values were found for Cr, Zn andespecially Cd. The distribution pattern of the lastthree metals and the exponential relationship of theirconcentrations with distance from the incinerator,showed that the disposal plant is a local source ofatmospheric pollution due to Cd, Cr and Zn. For thesemetals, long-term hazard should be seriously taken into account.     

Using Multi-Scale Sampling and Spatial Cross-Correlation to Investigate Patterns of Plant Species Richness

Land managers need better techniques to assess exoticplant invasions. We used the cross-correlationstatistic, I _YZ, to test for the presence ofspatial cross-correlation between pair-wisecombinations of soil characteristics, topographicvariables, plant species richness, and cover ofvascular plants in a 754 ha study site in RockyMountain National Park, Colorado, U.S.A. Using 25 largeplots (1000 m²) in five vegetation types, 8 of 12variables showed significant spatial cross-correlationwith at least one other variable, while 6 of 12variables showed significant spatial auto-correlation. Elevation and slope showed significant spatialcross-correlation with all variables except percentcover of native and exotic species. Percent cover ofnative species had significant spatialcross-correlations with soil variables, but not withexotic species. This was probably because of thepatchy distributions of vegetation types in the studyarea. At a finer resolution, using data from ten1 m² subplots within each of the 1000 m² plots, allvariables showed significant spatial auto- andcross-correlation. Large-plot sampling was moreaffected by topographic factors than speciesdistribution patterns, while with finer resolutionsampling, the opposite was true. However, thestatistically and biologically significant spatialcorrelation of native and exotic species could only bedetected with finer resolution sampling. We foundexotic plant species invading areas with high nativeplant richness and cover, and in fertile soils high innitrogen, silt, and clay. Spatial auto- andcross-correlation statistics, along with theintegration of remotely sensed data and geographicinformation systems, are powerful new tools forevaluating the patterns and distribution of native andexotic plant species in relation to landscape structure.