Urban tracer dispersion experiments during the second DAPPLE field campaign in London 2004

As part of the DAPPLE programme two large scale urban tracer experiments using multiple simultaneous releases of cyclic perfluoroalkanes from fixed location point sources was performed. The receptor concentrations along with relevant meteorological parameters measured are compared with a three screening dispersion models in order to best predict the decay of pollution sources with respect to distance. It is shown here that the simple dispersion models tested here can provide a reasonable upper bound estimate of the maximum concentrations measured with an empirical model derived from field observations and wind tunnel studies providing the best estimate. An indoor receptor was also used to assess indoor concentrations and their pertinence to commonly used evacuation procedures.     

Verification of diffusive and pumped samplers for volatile organic compounds using a controlled atmosphere test facility

There is a requirement to verify the performance of sorbent-based passive or active samplers and to extend their use, where possible, to monitor volatile organic compounds (VOCs) that are known to be photochemical ozone pre-cursors or are relevant to the activities of the petrochemical industry. We report measurements of the 14-day diffusive uptake rates for the VOCs: i-butane (2-methyl propane), n-butane, i-pentane (2-methyl butane), n-pentane, n-hexane, benzene, toluene, and m-xylene (at environmental level concentrations) for industry standard axial samplers (Perkin–Elmer-type samplers) containing the sorbents Carbopack-X, -Z, -B or Tenax-TA. We also present data on back-diffusion, blank levels, and storage for the above sorbents, and describe the simultaneous use of the sorbent Carbopack-X for pumped sampling of certain VOCs. The results were obtained by dosing samplers in a controlled atmosphere test facility (CATFAC) operating under well-defined conditions of concentration, nominal temperature of 20 °C, wind speed of 0.5 m s^?1, and relative humidities of 0% and 80%. Field measurements were also obtained to provide supplementary data to support the laboratory study. Results are compared to existing published data, where these are available.     

PM2.5 and PM10: The influence of sugarcane burning on potential cancer risk

In Brazil, sugarcane fields are often burned to facilitate manual harvesting, and this burning causes environmental pollution from the large amounts of soot released into the atmosphere. This material contains numerous organic compounds such as PAHs. In this study, the concentrations of PAHs in two particulate-matter fractions (PM_2.5 and PM₁₀) in the city of Araraquara (SE Brazil, with around 200,000 inhabitants and surrounded by sugarcane plantations) were determined during the sugarcane harvest (HV) and non-harvest (NHV) seasons in 2008 and 2009. The sampling strategy included four campaigns, with 60 samples in the NHV season and 220 samples in the HV season. The PM_2.5 and PM₁₀ fractions were collected using a dichotomous sampler (10 L min^?1, 24 h) with Teflon? filters. The filter sets were extracted (ultrasonic bath with hexane/acetone (1:1 v/v)) and analyzed by HPLC/Fluorescence. The median concentration for total PAHs (PM_2.5 in 2009) was 0.99 ng m^?3 (NHV) and 3.3 ng m^?3 (HV). In the HV season, the total concentration of carcinogenic PAHs (benz(a)anthracene, benzo(b)fluoranthene, benzo(k)fluoranthene, and benzo(a)pyrene) was 5 times higher than in the NHV season. B(a)P median concentrations were 0.017 ng m^?3 and 0.12 ng m^?3 for the NHV and HV seasons, respectively. The potential cancer risk associated with exposure through inhalation of these compounds was estimated based on the benzo[a]pyrene toxic equivalence (BaP_eq), where the overall toxicity of a PAH mixture is defined by the concentration of each compound multiplied by its relative toxic equivalence factor (TEF). BaP_eq median (2008 and 2009 years) ranged between 0.65 and 1.0 ng m^?3 and 1.2–1.4 ng m^?3 for the NHV and HV seasons, respectively. Considering that the maximum permissible BaP_eq in ambient air is 1 ng m^?3, related to the increased carcinogenic risk, our data suggest that the level of human exposure to PAHs in cities surrounded by sugarcane crops where the burning process is used is cause for concern.     

Influence of roads and inhabited areas on metal concentrations in terrestrial mosses

The guidelines regarding sampling terrestrial mosses for biomonitoring the atmospheric contamination in a region specifically recommend that sampling close to focal points of contamination (i.e. roads, populated areas, etc.) should be avoided for satisfactory characterization of general patterns of contamination. However, these recommendations cannot always be followed in many parts of the world with dense, highly dispersed populations. The aim of the present study was to determine how the distances between sampling sites (SS) and contamination foci such as roads, isolated houses and urban nuclei affect regular, large-scale sampling networks. Metal concentrations obtained in biennial sampling surveys carried out between 2000 and 2006 in Galicia (NW Spain) were used, and the relative proportions of the concentrations corresponding to small-scale and large-scale processes were calculated. The possible relationship between the mean concentrations corresponding to small-scale processes in the different sampling surveys and the distances from SS to roads, buildings and urban nuclei was established by a GIS. Outliers in the data were identified at many of the SS and frequency statistics revealed the absence of any relationship between the distance to these foci and the concentrations of metals in the moss. The method also revealed many instances of the influence of one or more small-scale contamination foci such as airports and railways (often not considered in the sampling recommendations) on SS. Relocation of such SS would improve the representativeness of the sampling grid.     

Coupled radon, methane and nitrate sensors for large-scale assessment of groundwater discharge and non-point source pollution to coastal waters

We constructed a survey system of radon/methane/nitrate/salinity to find sites of submarine groundwater discharge (SGD) and groundwater nitrate input. We deployed the system in Waquoit Bay and Boston Harbor, MA where we derived SGD rates using a mass balance of radon with methane serving as a fine resolution qualitative indicator of groundwater. In Waquoit Bay we identified several locations of enhanced groundwater discharge, out of which two (Childs and Quashnet Rivers) were studied in more detail. The Childs River was characterized by high nitrate input via groundwater discharge, while the Quashnet River SGD was notable but not a significant source of nitrate. Our radon survey of Boston Harbor revealed several sites with significant SGD, out of these Inner Harbor and parts of Dorchester Bay and Quincy Bay had groundwater fluxes accompanied by significant water column nitrogen concentrations. The survey system has proven effective in revealing areas of SGD and non-point source pollution.     

Distributions of radionuclide sorption coefficients (Kd) in sub-surface sediments and the implications for transport calculations

The effect of the spatial variability of K_d on calculations of contaminant travel time in the vadose zone was determined. Depth discrete measurements of K_d were made for a suite of radionuclides (¹⁰⁹Cd, ⁵⁷Co, ⁶⁰Co, ⁸⁵Sr, ¹³⁷Cs, and ⁸⁸Y) utilizing a sediment core from the E-Area at the Savannah River Site. The K_d’s were ordered as ⁸⁵Sr²⁺ < ¹³⁷Cs⁺ < ¹⁰⁹Cd²⁺ < ⁵⁷Co²⁺ = ⁶⁰Co²⁺ << ⁸⁸Y³⁺ and the values generally fell below or near the lowest quartile of values reported in the literature. Correlations were generally weak between soil properties and K_d values. Most importantly, all of the K_d distributions could be reasonably approximated as log-normal. Deterministic and stochastic calculations of contaminant travel time to the water table were made. The deterministic calculations were based on each of three conceptual models of the vadose zone: complete stratification (17 strata, each with a different K_d), two strata (two sections of the vadose zone, each characterized by a single, average K_d), and unstratified (a single zone with an average K_d). Stochastic calculations were based on log-normal fits to the K_d data. The two strata model generally yielded travel times 2× greater than those in the completely stratified model. The unstratified model yielded travel times that were between 3 and 5 times greater than the completely stratified model. The stochastic mean travel times were comparable to those of the two strata model.     

Decolouration of azo dyes by <Emphasis Type="Italic">Phanerochaete chrysosporium</Emphasis> immobilised into alginate beads

Background, aim and scope  

Because of high discharged volumes and effluent composition, wastewater from the textile industry can be considered as the most polluting amongst all industrial sectors, thus greatly requiring appropriate treatment technologies. Although some abiotic methods for the reduction of several dyes exist, these require highly expensive catalysts and reagents. Biotechnological approaches were proven to be potentially effective in the treatment of this pollution source in an eco-efficient manner. The white-rot fungi are, so far, the most efficient microorganisms in degrading synthetic dyes. This white-rot fungi’s property is due to the production of extracellular lignin-modifying enzymes, which are able to degrade a wide range of xenobiotic compounds because of their low substrate specificity. In this paper, we studied the ability of the white-rot fungus Phanerochaete chrysosporium immobilised into Ca-alginate beads to decolourise different recalcitrant azo dyes such as Direct Violet 51 (DV), Reactive Black 5 (RB), Ponceau Xylidine (PX) and Bismark Brown R (BB) in successive batch cultures. To the best of our knowledge, this is the first study on the immobilisation of P. chrysosporium into Ca-alginate beads for its application in dye decolouration.     

TiO2 nanoparticles – Relationship between dispersion preparation method and ecotoxicity in the algal growth test

Abstract Purpose Little is known about the ecotoxicity of nanomaterials and there are no specific guidelines for sample preparation and testing. We set out to establish whether the method used to prepare TiO₂ dispersions had a significant impact on aquatic ecotoxicity. We also followed the formation of agglomerates during the incubation period.     

Reagenzienfreie Bestimmung von Quecksilberspuren in Wasserproben

Routinef?hige, kostengünstige analytische Messverfahren sind die Grundlage für ein fl?chendeckendes Umweltmonitoring von Schadstoffen und somit für die Sicherung unserer Gesundheit und natürlichen Lebensgrundlagen. Hierbei kann die Analytik zur nachhaltigen Nutzung und zur Schonung unserer Umweltressourcen beitragen, indem auf den Einsatz umweltgef?hrdender Reagenzien verzichtet wird.