Dimethyl disulfide and dimethyl trisulfide: so similar yet so different in evoking biological responses in saprophilous flies

Dimethyl disulfide (DMDS) and dimethyl trisulfide (DMTS) are used by saprophilous insects to locate breeding sites (decaying organic matter), and by brood-site deceptive flowers to attract such insects. However, little is known about the relative importance of these two compounds in eliciting electrophysiological and behavioral responses in the insects. Here, we compared the relative attractiveness of DMDS and DMTS to saprophilous flies in field choice experiments and tested whether potential differences in field responses can be explained by differences in electrophysiological antennal responses to these compounds. Field experiments revealed that the attractiveness of a mixture of these compounds is due to DMTS alone. This result was confirmed by electroantennographic recordings in which flies of four tested species of Calliphoridae (Lucilia sericata, L. caesar, Calliphora vicina, Protocalliphora azurea) and one Muscidae (Musca domestica) respond clearly to DMTS, but not to DMDS. In house flies, however, DMTS elicited electrophysiological responses only, not reflected in behavioral assays. Despite the fact that DMTS and DMDS exhibit similar chemical structures, both the electroantennographic and field responses from saprophilous flies to these two compounds strongly differed. Our study suggests that oligosulfide-responsive saprophilous flies rely on DMTS and not DMDS for finding appropriate breeding sites and that DMTS and not DMDS could act as a key mediator for pollinator attraction in brood-site deceptive plants.     

Waste collection multi objective model with real time traceability data

Waste collection is a highly visible municipal service that involves large expenditures and difficult operational problems, plus it is expensive to operate in terms of investment costs (i.e. vehicles fleet), operational costs (i.e. fuel, maintenances) and environmental costs (i.e. emissions, noise and traffic congestions). Modern traceability devices, like volumetric sensors, identification RFID (Radio Frequency Identification) systems, GPRS (General Packet Radio Service) and GPS (Global Positioning System) technology, permit to obtain data in real time, which is fundamental to implement an efficient and innovative waste collection routing model. The basic idea is that knowing the real time data of each vehicle and the real time replenishment level at each bin makes it possible to decide, in function of the waste generation pattern, what bin should be emptied and what should not, optimizing different aspects like the total covered distance, the necessary number of vehicles and the environmental impact. This paper describes a framework about the traceability technology available in the optimization of solid waste collection, and introduces an innovative vehicle routing model integrated with the real time traceability data, starting the application in an Italian city of about 100,000 inhabitants. The model is tested and validated using simulation and an economical feasibility study is reported at the end of the paper.     

Residues behavior of some fungicides applied on two greenhouse tomato varieties different in shape and weight

The degradation of 12 fungicides (azoxystrobin, cymoxanil, cyproconazole, cyprodinil, fenarimol, fludioxonil, iprovalicarb, mepanipyrim, penconazole, pyrimethanil, tolclofos-methyl, triadimenol), commonly used in pest management strategies on Sardinian greenhouse tomato crops was studied. A different residue behaviour was observed between the studied cultivar. On the smaller, a “cherry” type tomato, field data showed an initial residue mostly higher than the “beefsteak” tomato. In any case, except for penconazole, all pesticide residues were below their maximum residue levels (MRLs) reaching the pre-harvest interval (PHI). On both cultivar, triadimenol and cymoxanil residues completely disappeared reaching their PHI, while iprovalicarb, fenarimol, and fludioxonil disappeared in a time of 17 to 24 days. On the contrary, azoxystrobin, cyproconazole, cyprodinil, penconazole, tolclofos-methyl, mepanipyrim, and pyrimethanil showed a long persistence on both tested cultivar and may have residual problems due to an accumulation effect if repeated field treatments will be performed. The first group of molecules according to their rapid degradation could be used in low pesticide-input management in order to obtain tomatoes with low or no detectable residues.     

Determination of 28 pesticides applied on two tomato cultivars with a different surface/weight ratio of the berries,using a multiresidue GC-MS/MS method

The behavior of 28 pesticides on two tomato cultivars with a different surface/weight (S/W) ratio of the berries (S/W, Birikino vs. Tombola) was studied, in order to provide appropriate indications about their persistence on crops reaching the pre-harvest interval (PHI). Quantitative analysis was performed using a GC MS/MS method. Birikino cv. (BIR) was a “cherry type tomato” with a double S/W ratio compared with Tombola cv. (TOM). The results showed a different pesticide behavior. Azoxystrobin, Boscalid, Bupirimate, Difenoconazole, Etofenprox, Iprodione, Mepanipyrim, Myclobutanil, Tebuconazole, Zoxamide, Metalaxyl M, Pyrimethanil, Tetraconazole, Benalaxyl, Cyprodinil, Fenamidone, Famoxadone and Fludioxonil immediately after treatments showed residues on BIR higher than TOM, and this behavior is consistent with its greater exposed surface. BIR showed higher decay rates of these pesticides during the whole trial, nevertheless residue averages remained higher than TOM reaching the time of harvest. Residues at the PHI were all below their Maximum Residue Levels (MRLs), but data indicated that they could exceed their legal limits especially if the above-mentioned active ingredients were employed more than once per crop cycle on cherry type tomatoes. As regards to Chlorpyrifos, Chlorpyrifos methyl, Triadimenol, Pyridaben and Tebufenpyrad, no different residual behavior related to S/W ratio of the cultivars was observed. Even in this case, residues at the PHI were all below MRLs. As for Cyfluthrin, Deltamethrin, Lambda cyhalothrin, Etoxazole and Cyproconazole, residues were lower than the limit of quantitation (LOQ) of the analytical method just after the treatment, according to their low doses of employment.     

Increasingly warm summers in the Euro–Mediterranean zone: mean temperatures and extremes

The recent increase in European temperatures led to a strong enhancement in the occurrence of extremely warm events, with relevant consequences for environment and everyday life. Here, we investigate the evolution of very intense warm and cold events in a south-western European zone during 1961–2007 at a seasonal level. Special attention is given to summertime when warming is the most pronounced. Using a previously developed theoretical model, we discuss how the average properties and long-term trends observed in probability density functions of daily temperatures can explain changes in the frequency of severe, isolated events. In this perspective, the recent intensification of extremely warm events, especially experienced by the Mediterranean zone, is proved to be well consistent with a pure shift of seasonal mean temperatures. On the other hand, any change in the second and higher distributional moments of daily temperatures is ruled out by the data, whereas the average values of these properties, that is, variability and asymmetry, do play a role by shaping the temporal behavior of very intense events.     

Development of low-cost ammonia gas sensors and data analysis algorithms to implement a monitoring grid of urban environmental pollutants

The present study is focused on the implementation of a novel, low cost, urban grid of nanostructured chemresistor gas sensors for ammonia concentration ([NH(3)]) monitoring, with NH(3) being one of the main precursors of secondary fine particulate. Low-cost chemresistor gas sensors based on carbon nanotubes have been developed, their response to [NH(3)] in the 0.17-5.0 ppm range has been tested, and the devices have been properly calibrated under different relative humidity conditions in the 33-63% range. In order to improve the chemresistor selectivity towards [NH(3)], an Expert System, based on fuzzy logic and genetic algorithms, has been developed to extract the atmospheric [NH(3)] (with a sensitivity of a few ppb) from the output signal of a model chemresistor gas sensor exposed to an NO(2), NO(X) and O(3) gas mixture. The concentration of these pollutants that are known to be the most significant interfering compounds during ammonia detection with carbon nanotube gas sensors has been tracked by the ARPA monitoring network in the city of Milan and the historical dataset collected over one year has been used to train the Expert System.     

Evaluation of a portable nephelometer against the Tapered Element Oscillating Microbalance method for monitoring PM(2.5)

Monitoring personal exposure to particle matter (PM(2.5)) in ambient air requires performing measurements using portable monitors. In this work, the portable nephelometer SidePak? AM510 Personal Aerosol Monitor manufactured by TSI Inc. was evaluated against a Tapered Element Oscillating Microbalance (TEOM) equipped with a Filter Dynamics Measurements System (FDMS). Conventionally, the SidePak is calibrated with respect to the Arizona Road Test Dust and then multiplied by an environmental calibration factor to yield mass concentration. To adapt this calibration to specific field conditions, we present an implementation of this calibration by introducing a growing factor correction which takes into account relative humidity and the dry and wet portions of the refractive index estimated from TEOM-FDMS measurements. PM(2.5) sampling with several SidePaks AM510 was carried out in background and rural sites in the Po Valley (Italy). Modeled SidePak data were plotted vs. reference TEOM-FDMS data which show a good agreement.     

Detection of a Toxic Product Released by a Polyurethane-Containing Film Using a Composting Test Method Based on a Mineral Bed

The degradation of a film containing a 4,4diphenyl methane diisocyanate (MDI) poly(€-caprolactone)-based polyurethane was followed in a test system based on a mineral solid bed designed to facilitate analysis of break-down products released under composting conditions. The use of a mineral solid bed can help extraction and analytical procedures which could be hindered by the heterogeneous nature of compost. The fermentation conditions are typical of the composting environment and generate a powerfully degradative environment. The film fully disintegrated within 30 days of treatment. Analysis on the mineral bed extracts showed that: (i) about 40% of the initial polyurethane was still present in the bed extracts; (ii) this residue was strongly degraded in the poly(€-caprolactone) part, while the urethane part was almost completely recovered (from 80 to 95%, according to the measurement method); (iii) 4,4 diamino diphenyl methane (MDA), a very dangerous product of MDI, was released during biodegradation. The results indicate that a mineral bed can be employed to study degradation and metabolites formation in solid phase fermentation and that the MDI-based polyurethanes are not susceptible of a full degradation during composting and maintain the potential of a slow release of MDA into the environment after soil application.     

First-trimester genetic diagnosis in multiple pregnancy: Principles and potential pitfalls

Both the principles of first-trimester genetic diagnosis in multiple pregnancy and the special considerations required to avoid potential diagnostic pitfalls are presented. The experience consisted of 65 cases of twins and one case of quadruplets. Dichorionic twins were recognized by sonography in 54 cases. Transabdominal aspiration was generally preferred to trans-cervical for obtaining chorionic tissue, although in two cases both approaches were used. Diagnostic error following erroneous sampling was reported in 3 out of 54 sets of dichorionic twins (5.5 per cent). When like-sex dichorionic twins cannot be differentiated by cytogenetic or DNA polymorphism studies, amniocentesis should be recommended to confirm the reliability of the result on chorionic tissue.     

Correction to: Human behavior and Homo-mammal interactions at the first European peopling: new evidence from the Pirro Nord site (Apricena,Southern Italy)

The Science of Nature - Female-only colour polymorphism is rare in birds, but occurs in brood parasitic cuckoos (Cuculidae). Obligate brood parasites leave incubation and parental care to other...