固定化微生物技术在环境工程中的应用研究进展

综述了固定化微生物的制作方法及载体的选择,并对固定化技术在废水、大气和土壤等环境工程中的应用和研究进展状况进行了简介,同时对固定化技术的应用前景及存在的问题进行了评述。     

单级生物脱氮的特性研究

以 PVA为载体 ,采用冷冻法混合固定硝化菌和反硝化菌 ,研究硝化菌与反硝化菌的比例、有机碳源、p H值、碱度、温度和DO等因素对单级脱氮过程的影响 .试验结果表明 :当硝化菌 /反硝化菌 =1.5∶ 1～ 3.6∶1 (W∶W)时 ,脱氮速率最快 .在甲醇、乙醇、醋酸和葡萄糖 4种有机碳源中 ,以乙醇为碳源时脱氮速率最快 .最适的温度、pH值和 DO分别是 30℃、8.2和 2 mg/L～ 6mg/L.碱度与氨氮的比例越高 ,脱氮速率越快 ,但当碱度 /氨氮 >9.0时 ,脱氮速率趋于稳定 .     

污染物总量控制目标的确定

污染物总量控制是我国环境管理工作的一大进步。本文从其涵义入手,简要介绍了污染物总量控制指标体系的建立及污染物总量控制目标的确定方法。     

地衣对建筑物的生物破坏作用

大量的证据表明地衣可以诱发和加速矿质基质的物理、化学风化过程,着生于建筑物表面的地衣能对建筑材料导致明显的生物破坏.其中,地衣菌丝在矿质基质中的穿插生长、原植体随环境变化表现出的膨胀收缩、冻融交替等机制对建筑物造成机械破坏.而地衣分泌的草酸等简单有机酸以及大量的高分子有机化合物诱发和促进矿质基质的生物-化学风化过程.受其影响,矿质建材中原生矿物遭受溶解、蚀变,并产生多种次生矿物.最终破坏建筑物的坚固程度、缩短其使用寿命、减低其美学价值.     

蒙脱石颗粒吸附剂的制备及除锌研究

以蒙脱石为原料,粉煤灰为激发剂,添加一定量的黏结剂混合造粒制成复合颗粒吸附剂,用于处理含Zn2+废水,实验研究了蒙脱石/粉煤灰混合比例、焙烧温度、添加剂用量等因素对复合颗粒强度和吸附性能的影响。研究结果表明,制备复合颗粒较佳的工艺条件为:蒙脱石与粉煤灰的混合比为6∶4,焙烧温度105℃,硅酸钠的添加比例为15%(蒙脱石/粉煤灰混合物质量)。制成的颗粒吸附剂不仅吸附效果好,而且其散失率较低。     

Relationships between distributions of longevous population and trace elements in the agricultural ecosystem of Rugao County,Jiangsu, China

Soil, plant, and water, as well as trace elements they contain, can influence human health through the food chain. A survey was conducted on distributions of trace elements in soils, plants, and drinking water in Rugao County, Jiangsu Province, China, an agricultural area with a high level of centenarians and nonagenarians. The ratio of people over 90 years old per 100,000 inhabitants (90-rate) based on village (about 4,000 residents in 4 km²) was correlated with trace elements in soil, drinking water, and rice by means of correlation analysis and/or principal component analysis. Although the average 90-rate in the whole area was as high as 277, the rates were not uniform across the entire region. The 90-rate in the area of loamy and strongly-developed Anthrosols and Cambosols was about 330, significantly higher than the 255 in the areas of sandy and strongly-developed Cambosols and of clayey and weakly-developed Cambosols. The concentrations of available Se, B, Ni, and Mo in soils of the area with the high 90-rate were markedly greater than those in the area with the low 90-rate. This was demonstrated by highly positive correlations between the 90-rate and available Se (r = 0.33), B (r = 0.21), Ni (r = 0.17) and Mo (r = 0.17) at the p < 0.01 level and high loadings of available Se (0.851), B (0.535), Ni (0.594) and Mo (0.394) in the longevous factor. Similar relationships between the available elements in soils and elements in water and rice were found. These results suggest that: (1) the available forms of elements in soil were more crucial to elemental bio-availability in the ecosystem and human health than total elements in soil; and (2) the element association above might have affected the 90-rate positively and could be an important environmental geochemical factor influencing the longevity of humans.     

生产过程中的风险控制和安全管理

生产安全管理可以归纳为生产过程中对人、设备、环境风险因素的评估、控制和消除的综合管理.生产企业在开展安全性评价工作的基础上,通过应用风险控制的基本方法,可以对企业的安全管理起到积极的主导作用,促进安全生产良性循环.     

Adsorption of microcystins by carbon nanotubes

The production of cyanobacterial toxins microcystins (MCs) by cyanobacterial bloom which may promote the growth of tumor in human liver is a growing environmental problem worldwide. In this paper, the adsorption of MC-RR and LR, which were extracted from cyanobacterial cells in Dianchi Lake in China, by carbon nanotubes (CNTs), wood-based activated carbon (ACs) and clays were investigated. Compared with ACs and clay materials of sepiolite, kaolinite and talc tested, CNTs were found to have a strong ability in the adsorption of MCs. At the concentrations of 21.5 mg l(-1) MC-RR and 9.6 mg l(-1) MC-LR in 50 mmol phosphate buffer solution (pH 7.0), the adsorption amounts of MCs by CNTs with the range of outside diameter from 2 to 10nm were 14.8 and 5.9 mg g(-1), which were about four times higher than those by other adsorbents tested. It was shown that with the decrease of CNTs outside diameters from 60 to 2 nm, the adsorption amount of MCs was apparently increased, however the size of CNTs particles formed in solution declined. This result implies that the size of CNTs tube pore that is fit for the molecular dimension of MCs plays a dominant role. Furthermore the specific surface area of CNTs was also found to be a factor in the adsorption of MCs. The results suggested that the selection of suitable size of CNTs as a kind of adsorbent is very important in the efficient eliminating MCs from drinking water in future.     

化学防护服的功能性测试

本文主要探讨了化学防护服（CPC）的功能性测试过程,包括耐化学性能测试、整体性能测试、物理性能测试、人体工程学性能测试。评价CPC是否合格的前题是应该将它暴露在最糟糕的环境下,看它是否能够长时间的起到保护作用。化学防护中与暴露物体直接接触的特征决定了这一类服饰必须经过非常严格的测试才能被选择使用。由此可见性能测试的实用性,对于服装性能测试原理和过程的深刻理解有助于我们了解服装整体的防护性能,更好地做出选择。     

印染污泥特性及其掺煤焚烧处置的环境影响研究

对佛山6家印染厂污泥的基本性质和重金属污染进行了分析研究。结果表明:印染污泥有机质含量较高;对照农用污泥污染物限值和城镇污水处理污泥处置混合填埋用泥质标准,Cr、Ni、Cu、Zn不同程度超标,说明印染污泥既不能农用,也不能混合填埋。污泥浸出液中重金属浓度远低于危险废物浸出毒性限值和城镇污水处理厂污泥单独焚烧用泥质的污染物限值。污泥与煤掺混焚烧烟道气中二恶英浓度在0.0125～0.022 ngTEQ/Nm3,远低于GB 18485—2001《生活垃圾焚烧污染控制标准》限值和GB/T 24602—2009《城镇污水处理厂污泥处置单独焚烧用泥质》限值。