Discharge permit market and farm management nexus: an approach for eutrophication control in small basins with low-income farmers

The economic concerns of low-income farmers are barriers to nutrient abatement policies for eutrophication control in surface waters. This study brings up a perspective that focuses on integrating multiple-pollutant discharge permit markets with farm management practices. This aims to identify a more economically motivated waste load allocation (WLA) for non-point sources (NPS). For this purpose, we chose the small basin of Zrebar Lake in western Iran and used the soil and water assessment tool (SWAT) for modeling. The export coefficients (ECs), effectiveness of best management practices (BMPs), and crop yields were calculated by using this software. These variables show that low-income farmers can hardly afford to invest in BMPs in a typical WLA. Conversely, a discharge permit market presents a more cost-effective solution. This method saves 64% in total abatement costs and motivates farmers by offering economic benefits. A market analysis revealed that nitrogen permits mostly cover the trades with the optimal price ranging from $6 to $30 per kilogram. However, phosphorous permits are limited for trading, and their price exceeds $60 per kilogram. This approach also emphasizes the establishment of a regional institution for market monitoring, dynamic pricing, fair fund reallocation, giving information to participants, and ensuring their income. By these sets of strategies, a WLA on the brink of failure can turn into a cost-effective and sustainable policy for eutrophication control in small basins.     

Assessment of water quality of Manchar Lake in Sindh (Pakistan)

Manchar Lake is the largest natural freshwater lake in Pakistan. The Lake has received less fresh water in past few years. In addition, drainage water is being discharged in the Lake through Main Nara Valley Drain (MNVD) since many years. Consequently, concern has grown regarding the water quality of the Lake. The aim of this study was to assess the water quality of Manchar Lake and MNVD and the objectives were to determine physiochemical properties and the concentrations of common cations and anions as well as seven trace metals i.e. Cu, Ni, Zn, Co, Fe, Pb and Cd. The concentration of the trace metals were determined by simultaneous preconcentration and solvent extraction using flame atomic absorption spectrometer. Results of physicochemical parameters of Manchar Lake water samples showed mean pH 8.4 (±0.2), conductivity 2,310.3 (±581.3) μS cm⁻¹ and hardness (as CaCO₃) 213.1 (±62.3) mg l⁻¹. Mean concentrations of cations and anions were Na 521.5 (±49.7), Cl⁻ 413.6 (±225.7), Ca 70.7 (±12.9), Mg 56.2 (±28.9), K 17.6 (±6.5), 0.34 (±0.2) and 0.02 (±0.01) mg l⁻¹. Mean concentrations of trace metals were Zn 15.7 (±1), Fe 12 (±3.5), Pb 9 (±2.7), Cu 8.9 (±7.7), Ni 4.3 (±3.4), Co 4 (±3.4) and Cd 1.1 (±1) μg l⁻¹. MNVD water samples showed mean pH 8.9 (±0.8), conductivity 1,735.7 (±567.8) μS cm⁻¹ and hardness (as CaCO₃) 184.8 (±32.4) mg l⁻¹. In MNWD, the mean concentrations of cations and anions were Na 482.7 (±11.7), Cl⁻ 395.7 (±271.5), Ca 79.1 (±23.5), Mg 54.2 (±28.1), K 26.2 (±21.3), NO⁻³ 0.5 (±0.3) and 0.1 (±0.1) mg l⁻¹. Mean concentrations of trace metals observed in MNWD water were Fe 14.9(±3.5), Cd 8.3 (±9.4), Pb 6.9 (±2.4), Cu 6.6 (±3.1), Zn 6.2 (±1.8), Co 4.5 (±2.7), and Ni 3.5 (±2.9) μg l⁻¹. The pH of both Manchar Lake and MNVD waters and concentration of Pb in Manchar Lake and concentration of Cd in MNVD water were higher than the World Health Organisation’s guideline values for the drinking water quality. The water quality of Manchar Lake was found degraded.     

Analysis of cost–benefit in life-cycle of plastic solid waste: combining waste flow analysis and life cycle cost as a decision support tool to the selection of optimum scenario

Millions of tons of plastic are consumed annually in the world due to its significant characteristics such as durability, flexibility, and low weight. High consumption has made plastic one of the most important municipal solid waste compounds, the quantity of which has increased in recent decades. Plastic solid wastes are known as a threat to the environment, and its efficient management in various aspects such as cost–benefit requires decision-making tools. This study was assessing the cost–benefit of plastic solid waste management by development of an economic model, and definition of different scenarios to change plastic solid waste management status. The results showed that 8971 tons of plastic solid waste were generated annually in the studied city. The plastic solid wastes were finally transferred to either recycling or landfilling site through 5 identified routes. 83 percent of the total recycled plastic solid waste was due to post-separation routes, and only 7.7 percent of the total plastic solid waste was recycled from the source separation route. The economic comparison of scenarios showed that with the aggregation of post-separation routes, the net revenue of plastic solid waste management increases by 334,000 euro per year while increasing the public participation and the ratio of source separation route raises net revenue by 875,000 euro per year, which was the best economic condition among the scenarios. Using life cycle cost method and it’s respected developed economic model truly satisfied the conditions of both, the current plastic solid waste management and the alternative scenarios, and hence can be adopted as a tool for decision-making.

     

Hospital site selection using fuzzy AHP and its derivatives

Environmental managers are commonly faced with sophisticated decisions, such as choosing the location of a new facility subject to multiple conflicting criteria. This paper considers the specific problem of creating a well-distributed network of hospitals that delivers its services to the target population with minimal time, pollution and cost. We develop a Multi-Criteria Decision Analysis process that combines Geographical Information System (GIS) analysis with the Fuzzy Analytical Hierarchy Process (FAHP), and use this process to determine the optimum site for a new hospital in the Tehran urban area. The GIS was used to calculate and classify governing criteria, while FAHP was used to evaluate the decision factors and their impacts on alternative sites. Three methods were used to estimate the total weights and priorities of the candidate sites: fuzzy extent analysis, center-of-area defuzzification, and the α-cut method. The three methods yield identical priorities for the five alternatives considered. Fuzzy extent analysis provides less discriminating power, but is simpler to implement and compute than the other two methods. The α-cut method is more complicated, but integrates the uncertainty and overall attitude of the decision-maker. The usefulness of the new hospital site is evaluated by computing an accessibility index for each pixel in the GIS, defined as the ratio of population density to travel time. With the addition of a new hospital at the optimum site, this index improved over about 6.5 percent of the geographical area.     

Distribution of heavy metals in surface sediments from the South China Sea ecosystem, Malaysia

The concentrations of arsenic, cadmium, chromium, copper, mercury, nickel, lead and zinc in surface sediments collected from the east coast of peninsular Malaysia, along the South China Sea, were measured by two methods instrumental neutron activation analysis and inductively coupled plasma mass spectroscopy. The obtained results were use to determine the areal distribution of the metals of in the east coast of peninsular Malaysia and potential sources of these metals to this environment. The geochemical data propose that most of the metals found in the east coast of peninsular Malaysia constitute a redistribution of territorial materials within the ecosystem. Then, the metal concentrations can be considered to be present at natural background levels in surface sediments.     

An improved optimization model for predicting Pb recovery efficiency from residual of liberator cells: a hybrid of support vector regression and modified tunicate swarm algorithm

Journal of Material Cycles and Waste Management - In this study, a hybrid of support vector regression and a modified tunicate swarm algorithm (SVR-MTSA) strategy is developed to optimize the...     

Effect of oil pollution on function of sandy soils in protected deserts and investigation of their improvement guidelines (case study: Kalmand area,Iran)

Soil pollution is one of the most dangerous sorts of environmental pollutions because of waste materials, fossil fuels, etc. Unfortunately in developing countries, there are very few arrangements to prevent soil pollution due to the fossil fuels and to improve polluted soil. In this research, influences of gas oil on properties of Kalmand protected area’s sandy soil near Yazd, Iran, were studied. It was found that gas oil constituted 5.25% of soil weight in the refueling station in the region. Therefore, cleaning and strengthening of the soil by adding cement rather than expensive and complicated methods were the most important goals of this research. First, the influence of gas oil on soil properties was studied, and to improve the soil, different percentages of ordinary portland cement were added to the polluted sand to study the improved soil properties using laboratory tests. It was found that unconfined compressive strength, cohesion, and angle of internal friction of sample with 16% cement and 8% gas oil after 28 days of curing were higher than those of the specimen of 6% cement and 14% gas oil, at 4.6, 5.4, and 1.3 times, respectively. Moreover, based on falling head tests it was observed that permeability of the stabilized specimens decreased substantially. From SEM tests, fewer voids were observed in the stabilized samples, which led to less pollutant penetration into the soil. According to EDX, although dangerous elements in the contaminated specimen made up 3.99% of the specimen total weight, addition of cement introduced considerable amounts of elements that are vital for pozzolanic reactions. Therefore, it can be concluded that addition of cement to the gas oil-polluted soil not only can improve geotechnical properties of the soil and reduce its permeability, but also is very efficient for environmental issues.     

Electrospinning production of nanofibrous membranes

Environmental Chemistry Letters - Electrospinning has attracted a worldwide interest as a technique for the production of nanofibrous membranes with diameter ranging 2 nm to several...