Polycyclic aromatic hydrocarbons in coastal sediments of Southern Terengganu,South China Sea,Malaysia: source assessment using diagnostic ratios and multivariate statistic

Environmental Science and Pollution Research - Surface sediments along the Southern Terengganu coast (≤7 km from the coast) were analyzed for polycyclic aromatic hydrocarbons (PAHs). The...     

A comparative study of the toxicity of lead and its impact on the carbohydrate metabolism and some haematological parameters of cichlid fish,oreochromis niloticus and catfish,clarius gariepinus from saudi arabia

Fresh and healthy specimens of Oreochromis niloticus (mean weight 70.5± 1.23 g and mean length, 12.3± 1.5cm) and Clarias gariepinus (mean weight, 41.8±2.3 g and mean length 13.78 ± 1.2 cm) were exposed to heavy metal lead, ranging in concentration from 10 to 18 mg L^‐1 for O. niloticus and 20 to 28 mg L^‐1 for C. gariepinus respectively. The 96 h LC₅₀ for both the species was computed as 12.45 mg L^‐1 (O. niloticus) and 22.65 mg L^‐1 (C. gariepinus). The cichlid fish was exposed to sublethal concentration of lead (2, 4 and 6 mgL^‐1) and catfish (4, 8 and 12 mgL^‐1). The erythrocytes count, haemoglobin concentration, haematocrit and the value of serum glucose increased significantly (P < 0.01), whereas leucocytes count, serum protein and serum triglyceride after intoxication declined in both the species with the same pattern but in different quantity. After 96 h of time a significant depletion of muscle and liver glycogen was noted, being greater in muscle (16.7% in O. niloticus) and in liver (15.9% in C. gariepinus). The response of fish to lead was dose dependent.     

Influence of hydrological runoff and catchment characteristics on accumulation floatable litter load in gross pollutant trap (GPT)

Journal of Material Cycles and Waste Management - The accumulation of floatable litter load captured in gross pollutant trap (GPT) due to the hydrological runoff has become challenging due to rapid...     

Cytotoxicity assessment of monocrotophos in Paramecium caudatum and Oxytricha fallax

Experiments were conducted to evaluate the toxic effects ofmonocrotophos in ciliate models Paramecium caudatum and Oxytricha fallax. In acute toxicity studies higherconcentrations of monocrotophos caused marked increase in mobility of cells exhibiting rocking movements within two mins of exposure but were decreased after 30 mins. LC50 value by mortality curve for 3 hr acute toxicity test of Oxytricha fallax and Paramecium caudatum was found 307.744 +/- 33.27 mg l(-1) and 332.284 +/- 57.52 mg l(-1) respectively. Oxytricha fallax was found sensitive than Paramecium caudatum to monocrotophos. In acute exposure cells showed deformities such as swelling, oval shaped deformity and in higher concentrations shortening of longitudinal axis with blackening of cytoplasm occurred. The length of paramecia was reduced prominently. Similarly enlargement of contractile vacuole and stress egestion of food vacuoles was also observed. The morphological studies showed the changes in shape, size, colour and width of Paramecia and Oxytricha. Frequencies of macronuclear aberrations were significant showing deformities such as rod shaped, elongation, fragmentation, diffusion and total absence of nucleus and were concentration dependent. The data provided in the present study on interaction of pesticides with nuclear structure can be of immense value because most of these pesticides have been reported to have carcinogenic, mutagenic and teratogenic properties.     

Optimization of co-digestion of various industrial sludges for biogas production and sludge treatment: Methane production potential experiments and modeling

Optimal biogas production and sludge treatment were studied by co-digestion experiments and modeling using five different wastewater sludges generated from paper, chemical, petrochemical, automobile, and food processing industries situated in Ulsan Industrial Complex, Ulsan, South Korea. The biomethane production potential test was conducted in simplex-centroid mixture design, fitted to regression equation, and some optimal co-digestion scenarios were given by combined desirability function based multi-objective optimization technique for both methane yield and the quantity of sludge digested. The co-digestion model incorporating main and interaction effects among sludges were utilized to predict the maximum possible methane yield. The optimization routine for methane production with different industrial sludges in batches were repeated with the left-over sludge of earlier cycle, till all sludges have been completely treated. Among the possible scenarios, a maximum methane yield of 1161.53 m³ is anticipated in three batches followed by 1130.33 m³ and 1045.65 m³ in five and two batches, respectively. This study shows a scientific approach to find a practical solution to utilize diverse industrial sludges in both treatment and biogas production perspectives.     

Reviewing biomimicry design case studies as a solution to sustainable design

There have been many studies on bio-inspired research, where biomimicry capabilities facilitating sustainable designs are in dearth. For a sustainable design, it is necessary to consider water efficiency, zero waste, thermal environment, and energy supply. This paper investigates how biomimicry is adopted in the sustainable design of buildings. A thorough content analysis of eight case studies focused on the built environment and how biomimicry integrated with the design of a building was executed. The selection of cases study was based on the concept of biomimicry by taking inspiration from nature and applying them in the everyday built environment. Thus, the building designs are more ecologically sustainable than conventional ones, where biomimicry approaches and principles are adopted. The findings suggest that the design of a building can inspire society with new ecological morals, where understanding of biological morphogenesis can inspire design to resolve challenges and essentially help create a healthy environment. Biomimicry harnesses and replicates the principles found in nature to create a built environment that benefits people and other living creatures and safeguards biodiversity. Thus, adopting biomimicry in designing a building will help to develop a culture of active environmental design.

     

TiO2/Ag modified penta-bismuth hepta-oxide nitrate and its adsorption performance for azo dye removal

A modified hydrophilic penta-bismuth hepta-oxide nitrate (Bi₅O₇NO₃) surface was synthesized via a precipitation method using TiO₂ and Ag as modified agents. The synthesized product was characterized by different analytical techniques. The removal efficiency was evaluated using mono-and di-sulphonated azo dyes as model pollutants. Different kinetic, isotherm and diffusion models were chosen to describe the adsorption process. X-ray photoelectron spectroscopy (XPS) results revealed no noticeable differences in the chemical states of modified adsorbent when compared to pure Bi₅O₇NO₃;however, the presence of hydrophilic centres such as TiO₂ and Ag developed positively charged surface groups and improved its adsorption performance to a wide range of azo dyes. Dyes removal was found to be a function of adsorbent dosage, initial dye concentration, solution pH and temperature. The reduction of Langmuir 1,2-mixed order kinetics to the second or first-order kinetics could be successfully used to describe the adsorption of dyes onto the modified adsorbent. Mass transfer can be described by intra-particle diffusion at a certain stage, but it was not the rate limiting step that controlled the adsorption process. Homogenous behavior of adsorbent surface can be explored by applying Langmuir isotherm to fit the adsorption data.     

Comparison of a plant based natural surfactant with SDS for washing of As(Ⅴ) from Fe rich soil

This study explores the possible application of a biodegradable plant based surfactant, obtained from Sapindus mukorossi, for washing low levels of arsenic （As） from an iron （Fe） rich soil. Natural association of As（Ⅴ） with Fe（Ⅲ） makes the process difficult. Soapnut solution was compared to anionic surfactant sodium dodecyl sulfate （SDS） in down-flow and a newly introduced suction mode for soil column washing. It was observed that soapnut attained up to 86% efficiency with respect to SDS in removing As. Full factorial design of experiment revealed a very good fit of data. The suction mode generated up to 83 kPa pressure inside column whilst down-flow mode generated a much higher pressure of 214 kPa, thus making the suction mode more efficient. Micellar solubilisation was found to be responsible for As desorption from the soil and it followed 1st order kinetics. Desorption rate coefficient of suction mode was found to be in the range of 0.005 to 0.01, much higher than down-flow mode values. Analysis of the PT-IR data suggested that the soapnut solution did not interact chemically with As, offering an option for reusing the surfactant. Soapnut can be considered as a soil washing agent for removing As even from soil with high Fe content.     

Assessment of cytotoxicity and toxicity for phosphonium-based deep eutectic solvents

In this work, the cytotoxicity and toxicity of phosphonium-based deep eutectic solvents (DESs) with three hydrogen bond donors, namely glycerine, ethylene glycol, and triethylene glycol were investigated. The cytotoxicity effect was tested using brine shrimp (Artemia salina). The toxicity was investigated using the two Gram positive bacteria Bacillus subtilis and Staphylococcus aureus, and two Gram negative bacteria Escherichia coli and Pseudomonas aeruginosa. The cytotoxicity of tested DESs was much higher than that of their individual components, indicating their toxicological behavior was different. It was also found that there was toxic effect on the studied bacteria, indicating their potential application as anti-bacterial agents. To the best of our knowledge, this is the first time the cytotoxicity and toxicity of phosphonium-based DESs were studied.