Potential application of highly reactive Fe(0)/Fe3O4 composites for the reduction of Cr(VI) environmental contaminants

We describe the use of highly reactive Fe(0)/Fe3O4 composites for the reduction of Cr(VI) species in aqueous medium. The composites were prepared by simple mechanical alloying of metallic iron and magnetite in different proportions, i.e. Fe(0) 25, 50, 75 and 90wt%. While after 3h of reaction pure Fe(0) and pure Fe3O4 showed only a low reduction efficiency of 15% and 25% Cr(VI) conversion, respectively, the composites, in particular Fe(0)(25wt%)/Fe3O4, showed a remarkable activity with ca. 65% Cr(VI) conversion. Kinetic experiments showed a high reaction rate during the first 3h, which subsequently decreased strongly, probably due to a pH increase from 6 to 8. Experiments with composites based on Fe(0)/alpha-Fe2O3, Fe(0)/gamma-Fe2O3 and Fe(0)/FeOOH showed very low activities, suggesting that Fe(oct)2+ in the magnetite structure plays an important role in the reaction. Scanning and high resolution electron microscopies and M?ssbauer spectra (transmission and conversion electron M?ssbauer spectroscopy) indicated that the mechanical alloying process promotes a strong interaction and interface between the metallic and oxide phases, with the Fe(0) particles completely covered by Fe3O4 particles. The high efficiency of the composite Fe(0)/Fe3O4 for Cr(VI) reduction is discussed in terms of a special mechanism where an electron is transferred from Fe(0) to magnetite to reduce Fe(oct)3+ to Fe(oct)2+, which is active for Cr(VI) reduction.     

Embryonic development and maternal–embryo relationships of the Portuguese dogfish <Emphasis Type="Italic">Centroscymnus coelolepis</Emphasis>

The embryonic development and the level of dependency of the embryos from the maternal organism were investigated for Centroscymnus coelolepis. During the development, there is a 22–32% loss of organic matter and gains of 95–122% and 29–46% on moisture and inorganic matter, respectively. Only 28–48% of the initial yolk energy is conserved in embryos, being the remaining used in catabolism. In late pregnancy, the epithelium thickness of uterine villi decreases and vascularity increases. Results suggest that only water and minerals are transferred from the mother to the embryos. Monounsaturated fatty acids are the main type of fatty acids representing 48% of the total yolk fatty acid content, followed by polyunsaturated (30%) and saturated fatty acids (18–21%).     

Electrostatic painting residues as an alternative raw material for red clay industry.

In this study, the viability of using electrostatic painting residues--paint sludge--as a raw material to the red clay industry was investigated. Red clay-based ceramic masses containing electrostatic paint residues were formulated during the study. The clays were obtained from the Rio do Rastro deposit, in Gravataí, and were of the standard formulation used in industry. Different ceramic mass formulations with additions of 0.5, 1.0, 2.5 and 5.0 wt.% electrostatic painting residue in addition to a formulation with no residue addition (standard formulation), were evaluated. The samples were uniaxially pressed in a double-effect press and were fired in an electric oven at 900, 950 and 1000 degrees C. The firing at constant temperature lasted 8 h, and heating rate was 150 K h(-1). After processing the samples were characterized in terms of their physical and mechanical properties. Environmental compatibility was also considered by the evaluation of gaseous emissions and leaching and solubilization tests according to the Brazilian standards NBR 10.005 and NBR 10.006, respectively. The results showed that it was possible to produce ceramic materials containing electrostatic painting residues within their formulations.     

Response of Brazilian native trees to acute ozone dose

Ozone (O₃) is a toxic secondary pollutant able to cause an intense oxidative stress that induces visual symptoms on sensitive plant species. Controlled fumigation experiment was conducted with the aim to verify the O₃ sensibility of three tropical species: Piptadenia gonoachanta (Mart.) Macbr. (Fabaceae), Astronium graveolens Jacq. (Anacardiaceae), and Croton floribundus Spreng. (Euphorbiaceae). The microscopical features involved in the oxidative stress were recognized based on specific histochemical analysis. The three species showed visual symptoms, characterized as necrosis and stippling between the veins, mostly visible on the adaxial leaf surface. All the studied species presented hypersensitive-like response (HR-like), and peroxide hydrogen accumulation (H₂O₂) followed by cell death and proanthocyanidin oxidation in P. gonoachanta and A. graveolens. In P. gonoachanta, a decrease in chlorophyll autofluorescence occurred on symptomatic tissues, and in A. graveolens and C. floribundus, a polyphenol compound accumulation occurred. The responses of Brazilian native species were similar to those described for sensitive species from temperate climate, and microscopical markers may be useful for the detection of ozone symptoms in future studies in the field.     

Production of biodiesel from waste frying oils

Waste frying oils transesterification was studied with the purpose of achieving the best conditions for biodiesel production. Transesterification reactions were carried out for 1 h using waste frying oils (WFOs), methanol, and sodium hydroxide as catalyst. In order to determine the best conditions for biodiesel production, a series of experiments were carried out, using methanol/WFO molar ratios between 3.6 and 5.4 and catalyst/WFO weight ratios between 0.2% and 1.0%. For oils with an acid value of 0.42 mg KOH/g, results show that a methanol/WFO ratio of 4.8 and a catalyst/WFO ratio of 0.6% gives the highest yield of methyl esters. Furthermore, an increase in the amount of methanol or catalyst quantity seems to simplify the separation/purification of the methyl esters phase, as showed by a viscosity reduction and an increasing purity to values higher than 98% for methyl esters phase.     

Use of constructed wetland systems with Arundo and Sarcocornia for polishing high salinity tannery wastewater

Treatment of tannery wastewater is problematic due to high and variable concentrations of complex pollutants often combined with high salinity levels. Two series of horizontal subsurface flow constructed wetlands (CWs) planted with Arundo donax and Sarcocornia fruticosa were set up after a conventional biological treatment system operating at a tannery site. The aim of the CWs was polishing organics and nitrogen from the high salinity effluent (2.2-6.6?g Cl(-)?L(-1)). Both plant species established and grew well in the CW. Arundo, however, had more vigorous growth and a higher capacity to take up nutrients. The CWs were efficient in removing COD and BOD(5) with removal efficiencies varying between 51 and 80% for COD (inlet: 68-425?mg?L(-1)) and between 53 and 90% for BOD(5) (inlet: 16-220?mg?L(-1)). Mass removal rates were up to 615?kg COD ha(-1)?d(-1) and 363 BOD(5) kg?ha(-1)?d(-1). Removal efficiencies were 40-93% for total P, 31-89% for NH(4)(+) and 41-90% for Total Kjeldahl Nitrogen. CW systems planted with salt tolerant plant species are a promising solution for polishing saline secondary effluent from the tannery industry to levels fulfilling the discharge standards.     

The use of multivariate statistical methods for optimization of the surface water quality network monitoring in the Paraopeba river basin,Brazil

This study sought to evaluate and propose adjustments to the water quality monitoring network of surface freshwaters in the Paraopeba river basin (Minas Gerais, Brazil), using multivariate statistical methods. A total of 13,560 valid data were analyzed for 19 water quality parameters at 30 monitoring sites, over a period of 5 years (2008–2013). The cluster analysis grouped the monitoring sites in eight groups based on similarities of water quality characteristics. This analysis made it possible to detect the most relevant monitoring stations in the river basin. The principal components analysis associated with non-parametric tests and the analysis of violation of the standards prescribed by law, allowed for identifying the most relevant parameters which must be maintained in the network (thermotolerant coliforms, total manganese, and total phosphorus). The discharge of domestic sewage and industrial wastewater, that from mining activities and diffuse pollution from agriculture and pasture areas are the main sources of pollution responsible for the surface water quality deterioration in this basin. The BP073 monitoring site presents the most degraded water quality in the Paropeba river basin. The monitoring sites BP094 and BP092 are located geographically close and they measure similar water quality, so a possible assessment of the need to maintain only one of the two in the monitoring network is suggested. Therefore, multivariate analyses were efficient to assess the adequacy of the water quality monitoring network of the Paraopeba river basin, and it can be used in other watersheds.     

Using multivariate techniques as a strategy to guide optimization projects for the surface water quality network monitoring in the Velhas river basin,Brazil

Surface water quality monitoring networks are usually deployed and rarely re-evaluated with regard to their effectiveness. In this sense, this work sought to evaluate and to guide optimization projects for the water quality monitoring network of the Velhas river basin, using multivariate statistical methods. The cluster, principal components, and factorial analyses, associated with non-parametric tests and the analysis of violation to the standards set recommended by legislation, identified the most relevant water quality parameters and monitoring sites, and evaluated the sampling frequency. Thermotolerant coliforms, total arsenic, and total phosphorus were considered the most relevant parameters for characterization of water quality in the river basin. The monitoring sites BV156, BV141, BV142, BV150, BV137, and BV153 were considered priorities for maintenance of the network. The multivariate statistical analysis showed the importance of a monthly sampling frequency, specifically the parameters considered most important.     

Integrated farming systems for improving soil carbon balance in the southern Amazon of Brazil

Regional Environmental Change - Integrated farming systems (IS) are one of the main strategies of the Brazilian government to reduce or compensate for carbon emissions from agriculture with...