A System for Measuring Vertical Concentration Profiles of Gaseous Pollutants,Using Carbon Dioxide as a Case Study

An electronically-controlled sampling system, characterised by its organ pipe design, has been developed for sampling air sequentially, at different heights within the breathing zone. Data are automatically logged at the different receptor levels, for the determination of the average vertical concentration profile of gaseous pollutants. The system has been coupled to a carbon dioxide monitor and used in a brief study of the spatial and temporal variation of indoor carbon dioxide concentration. The system can easily be extended for different heights or modified for use with other types of gas monitor. The results of a trial run, which was carried out in a coffee room, are presented and applications of the Organ Pipe Sequential Sampling (OPSS) system are discussed.     

Analysis of underlying causes of investigated loss of containment incidents in Dutch Seveso plants using the Storybuilder method

In the Netherlands there are around 400 “Seveso” sites that fall under the Dutch Major Hazards Decree (BRZO) 1999. Between 2006 and 2010 the Dutch Labour Inspectorate's Directorate for Major Hazard Control completed investigations of 118 loss of containment incidents involving hazardous substances from this group. On the basis of investigation reports the incidents were entered in a tailor-made tool called Storybuilder developed for the Dutch Ministry of Social Affairs and Employment for identifying the dominant patterns of technical safety barrier failures, barrier task failures and underlying management causes associated with the resulting loss of control events. The model is a bow-tie structure with six lines of defence, three on either side of the central loss of containment event. In the first line of defence, failures in the safety barriers leading to loss of control events were primarily equipment condition failures, pre start-up and safeguarding failures and process deviations such as pressure and flow failures. These deviations, which should have been recovered while still within the safe envelope of operation, were missed primarily because of inadequate indication signals that the deviations have occurred. Through failures of subsequent lines of defence they are developing into serious incidents. Overall, task failures are principally failures to provide adequate technical safety barriers and failures to operate provided barriers appropriately. Underlying management delivery failures were mainly found in equipment specifications and provisions, procedures and competence. The competence delivery system is especially important for identifying equipment condition, equipment isolation for maintenance, pre-start-up status and process deviations. Human errors associated with operating barriers were identified in fifty per cent of cases, were mostly mistakes and feature primarily in failure to prevent deviations and subsequently recover them. Loss of control associated with loss of containment was primarily due to the containment being bypassed (72% of incidents) and less to material strength failures (28%). Transfer pipework, connections in process plant and relief valves are the most frequent release points and the dominant release material is extremely flammable. It is concluded that the analysis of a large number of incidents in Storybuilder can support the quantification of underlying causes and provide evidence of where the weak points exist in major hazard control in the prevention of major accidents.     

Bipolar charged aerosol agglomeration and collection by a two-zone agglomerator

ＩｎｔｒｏｄｕｃｔｉｏｎＢｅｃａｕｓｅｏｆｔｈｅｌｏｗｅｆｆｉｃｉｅｎｃｙｏｆｔｈｅｅｌｅｃｔｒｏｓｔａｔｉｃｐｒｅｃｉｐｉｔａｔｏｒ (ＥＳＰ)ｆｏｒｃｏｌｌｅｃｔｉｎｇｔｈｅｓｕｂｍｉｃｒｏｎｐａｒｔｉｃｌｅｓ ,ｔｈｅｅｌｅｃｔｒｉｃａｌａｇｇｌｏｍｅｒａｔｉｏｎｍｅｔｈｏｄｈａｓｌｅｄｔｏａｎｉｎｃｒｅａｓｉｎｇｉｎｔｅｒｅｓｔｉｎｒｅｄｕｃｉｎｇｔｈｅｅｍｉｓｓｉｏｎｏｆｔｈｅｆｉｎｅｐａｒｔｉｃｌｅｓ .Ｍａｎｙａｕｔｈｏｒｓｈａｖｅｓｔｕｄｉｅｄｅｌｅｃｔｒｉｃａｌａｇｇｌｏｍｅｒａｔｉ…     

Laboratory scale studies on removal of chromium from industrial wastes

Chromium being one of the major toxic pollutants is discharged from electroplating and chrome tanning processes and is also found in the effluents of dyes,paint pigments,manufacturing units etc.Chromium exists in aqueous systems in both trivalent(Cr^3 )and hexavalent (Cr^6 )forms.The hexavalent form is carcinogenic and toxic to aquatic life,whereas Cr^3 is however comparatively less toxic.This study was undertaken to investigate the total chromium removal from industial effluents by chemical means in order to achieve the Pakistan NEQS level of 1 mg/L by the methods of reduction and precipitation.The study was conducted in four phase Ⅰ,the optimum pH and cost effective reducing agent among the four popular commercial chemicals was selected.As a result,pH of 2 was found to be most suitable and sodium meta bisulfate was found to be the most cost effective reducing agent respectively.Phase Ⅱ showed that lower dose of sodium meta hisulfate was sufficient to obtain 100% efficiency in reducing Cr^6 to Cr^3 ,and it was noted that reaction time had no significance in the whole process.A design curve for reduction process was established which can act as a tool for treatment of industrial effluents.Phase Ⅲ studies indicated the best pH was 8.5 for precipitation of Cr^3 to chromium hydroxide by using lime.An efficiency of 100% was achievable and a settling time of 30 minutes produced clear effluent.Finally in Phase Ⅳ actual waste samples from chrome tanning and electroplating industries,when precipitated at pH of 12 gave 100% efficiency at a settling time of 30 minutes and confirmed that chemical means of reduction and precipitation is a feasible and viable solution for treating chromium wastes from industries.     

京津冀地区一次污染过程的星载地基激光雷达联合观测分析

针对2018年3月9—15日京津冀地区的一次空气重污染过程,进行了基于地基颗粒物激光雷达组网的星载-地基联合观测分析。颗粒物激光雷达观测到污染前期为局地污染累积过程,中期有明显的污染物区域传输过程,北京受太行山沿线城市污染输送影响较大。风廓线激光雷达观测结果表明:此次污染过程近地面主要为偏南风且风力较弱,冷空气到来时风向转为较强东北风,导致污染消散。微波辐射计观测到保定在污染过程中出现持续6 d的逆温层,同时在污染过程中近地面相对湿度较高,逆温层被打破后污染开始消散。在污染过程的各个阶段中,污染团的空间分布与变化特征均被很好地反映出来,可见地天联合观测对污染物的累积与输送研究有较大的意义,能对京津冀及周边地区的大气污染联防联控提供有力支持。     

NdFeB磁体表面环保型Zn-Al涂层的盐雾腐蚀行为

目的 研究NdFeB磁体表面环保型Zn-Al涂层在盐雾环境中的腐蚀行为。方法 采用SEM、XRD、EDS、拉曼光谱、傅里叶变换红外光谱等对Zn-Al涂层的形貌、物相、成分结构进行分析。通过电化学曲线探究Zn-Al涂层在盐雾环境中的腐蚀机理。结果 在NdFeB磁体表面制备的环保型Zn-Al涂层的耐盐雾腐蚀时间不少于1 000 h。在盐雾腐蚀环境中,Zn-Al涂层表面逐渐被白锈覆盖,失去金属光泽,腐蚀至1 126 h时,Zn-Al涂层表面出现红色锈点,涂层微观组织呈蜂窝状结构,并出现微裂纹。腐蚀产物由Zn_(5)(OH)_(8)Cl_(2)·H_(2)O、Al_(9)SiAl_(12)(OH)_(18)(AlO_(4))(Si_(5)O_(16))Cl、Fe_(2)O_(3)和极少量的Zn、Al组成。腐蚀前期,Zn-Al涂层表面的钝化膜、硅烷膜起保护作用;随腐蚀进行,膜层破坏暴露出片状金属粉,金属粉活化,涂层发挥牺牲阳极保护作用;腐蚀后期,腐蚀介质通过涂层微裂纹穿透涂层至磁体,涂层牺牲阳极的保护作用和物理屏蔽保护作用显著减弱,直至失效。结论 环保型Zn-Al涂层可显著提高NdFeB磁体的耐中性盐雾腐蚀性能。     

Cleaner tanning practices for tannery pollution abatement: Role of enzymes in eco-friendly vegetable tanning

Concern about pollution related problems in the global scenario are persuading all the processing industries to adopt cleaner manufacturing practices. Thus, the leather industry is also under pressure to look for effective alternative tanning materials for chromium. Natural products like vegetable tannins are regaining importance. However, there are limitations in the use of vegetable tanning materials because of its high organic load in the effluent, which are difficult to degrade leading to high chemical oxygen demand (COD). Moreover, conventional vegetable tanning process requires partial pickling that involves the use of sodium chloride, to suppress osmotic swelling. This results in very high amount of total dissolved solid (TDS) content in wastewaters. In this investigation, an attempt has been made to design an eco-friendly vegetable tanning process combining pickle-free tanning and application of proteolytic enzymes to improve the exhaustion of vegetable tannins. Such an approach has resulted in more than 95% tannin exhaustion in the case of the experimental process, an increase of 10% compared with the conventional vegetable tanning process. The tanned leathers showed slight improvement in hydrothermal stability. Physical and tactile evaluation of experimental leathers has been better than conventionally tanned leathers. Surface colour values illustrated negligible variation in colour and shade between control and experimental leathers. The resultant leather showed opened up, split compact fibre structure that has been well coated, indicating that the enzyme assisted tanning process did not bring about any major change or destruction on the fibre structure of the leathers. The optimized system has been field tested in a commercial tannery. The results showed that the enzyme assisted tanning process is efficient in terms of improved quality of leather and also led to reduction in total solids (TS), chlorides and COD loads. The enzyme assisted tanning system presented appears to be a viable option for combating pollution arising from the conventional vegetable tanning system.     

北京山前典型细粒子污染过程的气象条件分析

可吸入颗粒物(PM₁₀)是近年来北京地区冬季首要污染物,其中细粒子(PM_2.5)污染受到广泛关注,由于该地区具有山前地区的地形和气象条件,使其细粒子污染更具区域代表性.对2007年12月北京出现的4次细粒子污染过程及气象条件进行了分析,结果表明:细粒子山前累积/清除时间,ρ(PM_2.5)峰值均与气象条件相关;12月23─26日的3 d连续累积,使26日的ρ(PM_2.5)日均值达到313.4 μg/m3,是国家ρ(PM₁₀₎二级标准〔环境空气质量标准(GB3095─1996)〕(150 μg/m3)的2.1倍,超过世界卫生组织ρ(PM_2.5)日均指导值(25 μg/m3)的11倍;持续的偏南风和边界层底层局地性环流,使得京津冀南部区域细粒子以日均96.7 μg/m3的高值累积在北京山前地区,造成了12月23—31日具有代表性的北京冬季严重细粒子污染.      

利用玉米浸泡液产电的微生物燃料电池研究

以玉米淀粉生产过程中的浸泡液（玉米浸泡液）作为接种液和基质,利用“三合一”膜电极的单室空气阴极微生物燃料电池进行试验,采用在线监测电压和废水分析方法对产电功率和化学需氧量（COD）、氨氮进行测定,探讨高COD、高氨氮有机废水产电及废水处理的可行性.结果表明,经过94 d（1个周期）的连续运行（固定外电阻为1 000 Ω）,17 d时输出电压达到最大（525.0 mV）,稳定期最大输出功率可达169.6 mW/m²,此时电池相应的电流密度为440.2 mA/m²,内阻约为350 Ω,开路电压619.5 mV;但燃料电池电子利用效率较低（库仑效率为1.6%）;1个周期结束时浸泡液的COD去除率达到51.6%,氨氮去除率25.8%.本试验利用玉米浸泡液成功获得电能,同时对浸泡液有效地进行了处理,为其资源化利用提供新途径.     

Future risk of flooding: an analysis of changes in potential loss of life in South Holland (The Netherlands)

Potential loss of life is considered an important indicator of flood risk. We examine the future development of potential loss of life due to flooding for a major flood prone area in The Netherlands. The analysis is based on projections and spatial distribution of population under a high economic growth scenario and a loss of life model. Results show that the projected population growth in flood prone areas is higher than average in the Netherlands between 2000 and 2040. Due to this effect the potential number of fatalities is projected to increase by 68% on average for 10 different flood scenarios, not including impacts from climate change and sea level rise. Just sea level rise of 0.30 m leads to an average 20% increase in the number of fatalities. The combined impact of sea level rise and population growth leads to an estimated doubling in the potential number of fatalities. Taking into account increasing probability of flooding due to sea level rise and extreme river discharges, the expected number of fatalities could quadruple by 2040. The presented results give a conservative and upper bound estimate of the increase of the risk level when no preventive measures are undertaken. It is found that the consideration of the exact spatial distribution of population growth is essential for arriving at reliable estimates of future risk of flooding.