Effect of water washing on the thermal behavior of rice straw

Rice straw can be used as a renewable fuel for heat and power generation. It is a viable mean of replacing fossil fuels and preventing pollution caused by open burning, especially in the areas where this residual biomass is generated. Nevertheless, the thermal conversion of rice straw can cause some operating problems such as slag formation, which negatively affects thermal conversion systems. So, the main objective of this research is studying the combustion behavior of rice straw samples collected from various regions by applying thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC). In addition, the thermal behavior of ashes from rice straw was also analyzed in order to detect their melting points, and ash sintering was detected at different temperatures within the range between 550 and 1000 °C. Since washing rice straw with water could reduce the content of undesirable inorganic compounds related to the ash fusibility, samples of washed rice straw were analyzed under combustion conditions to investigate its differences regarding the thermal behavior of rice straw. The results showed that rice straw washing led to a significant improvement in its thermal behavior, since it reduced the ash contents and sintering formation.     

Investigating the effect of compression on solute transport through degrading municipal solid waste

The effect of applied compression on the nature of liquid flow and hence the movement of contaminants within municipal solid waste was examined by means of thirteen tracer tests conducted on five separate waste samples. The conservative nature of bromide, lithium and deuterium tracers was evaluated and linked to the presence of degradation in the sample. Lithium and deuterium tracers were non-conservative in the presence of degradation, whereas the bromide remained effectively conservative under all conditions. Solute diffusion times into and out of less mobile blocks of waste were compared for each test under the assumption of dominantly dual-porosity flow. Despite the fact that hydraulic conductivity changed strongly with applied stress, the block diffusion times were found to be much less sensitive to compression. A simple conceptual model, whereby flow is dominated by sub-parallel low permeability obstructions which define predominantly horizontally aligned less mobile zones, is able to explain this result. Compression tends to narrow the gap between the obstructions, but not significantly alter the horizontal length scale. Irrespective of knowledge of the true flow pattern, these results show that simple models of solute flushing from landfill which do not include depth dependent changes in solute transport parameters are justified.     

Fire and explosion risk assessment for large-scale oil export terminal

Now in Russian Federation and other countries large-scale oil terminals (volume of one tank exceeds 100 000 m³, total volume of tanks exceeds 300 000 m³) are designed and constructed. Therefore fire safety of such objects becomes a very important task, solution of which is hardly possible without detail fire risk assessment. This study is aimed to a solution of this problem. Potential, individual and social risks were calculated. The potential risk was defined as a frequency of occurrence of hazardous factors of fires and explosions in a given point of space (the so-called risk contours). The individual risk was defined as a frequency of injuring a given person by hazardous factors of fires and explosions. Time of presence of this person in hazardous zones (near the hazardous installation) is taken into account during calculations of the individual risk. Social risk was defined as a dependence of frequency of injuring a given number of people by hazardous factors of fires and explosions on this number. In practice the social risk is usually determined on injuring not less than 10 people.

The oil terminal under consideration includes the following main parts: crude oil storage consisting of three tanks of volume 100 000 m³ each, input crude oil pipeline of diameter 0.6 m, crude oil pumps, output crude oil pipeline of diameter 0.8 m, auxiliary buildings and facilities. The following main scenarios of tank fires have been considered: rim seal fire, pool fire on a surface of a floating roof, pool fire on a total cross-section surface of the tank, pool fire in a dyke, explosions in closed or semiclosed volumes. Fires and explosions in other parts of the terminal are also taken into account. Effects of escalation of accidents are considered.

Risk contours have been calculated both for the territory of the terminal and for the neighbouring space. The potential risk for the storage zone is near 10⁻⁴–10⁻⁵ year⁻¹, and at a distance 500 m from the terminal the potential risk values do not exceed 10⁻⁶ year⁻¹. The values of the individual risk for various categories of workers are in the range of 10⁻⁵–10⁻⁶ year⁻¹. Because of low number of the workers on the terminal and large distances to towns and villages the social risk value is negligible. These risk values are consistent with practice of the best oil companies, and fire hazard level of the terminal can be accepted as tolerable.     

Longevity as an Animal Welfare Issue Applied to the Case of Foot Disorders in Dairy Cattle

In current dairy farming it is possible to run a profitable farm without having to adapt the system to the needs of dairy cows. In such systems the interests of the farmer and animals often diverge. Consequently, specific animal welfare problems occur. Foot disorders in dairy cattle are an illustrative example resulting from the specific methods of housing and management in current dairy farming. Foot disorders and the resulting lameness are considered the most important welfare problem in dairy farming. However, these foot disorders not only typify welfare problems related to certain housing systems, but they also lead to the premature culling of cows. The assessment of the impact of foot disorders on the welfare of dairy cows raised the question of whether premature culling affects animal welfare since it affects the longevity of a cow. We argue that this aspect of longevity is morally relevant as an animal welfare issue. In this paper we aim to explore whether longevity is both (a) a morally relevant aspect in the discussion on killing animals and (b) a constitutive element of animal welfare. In other words, we aim to explore whether longevity is an independent moral argument in an animal welfare discussion. We claim that longevity is not merely important as an indicator of animal welfare, but is also a constitutive element of animal welfare. We argue that we need a more integrated approach to animal welfare and that an assessment that includes the aspect of time is necessary. This view involves a shift from views on animal welfare in terms of functioning or feeling well to a view on animal welfare that includes the aspect of natural living in which species-specific development is important. To show the impact of these points of view, we look at the practical implications for choices concerning the management of foot disorders in dairy cattle.     

Long-Term Effectiveness of Restoration Treatments on Closed Wilderness Campsites

This study assessed long-term recovery of vegetation on six wilderness campsites in subalpine forests in Oregon that were closed to use and that received common restoration treatments (scarification, soil amendments, mulch, transplanting, and seeding). Vegetation cover was assessed every year for the first 7 years following treatment, as well as 10 and 15 years after treatment. This made it possible to compare long-term treatment effectiveness to short-term efficacy. Plots that were closed and not scarified had virtually no vegetation cover even after 15 years without use. If long-used campsites in these subalpine forests are simply closed and allowed to recover on their own, restoration of undisturbed conditions will require hundreds if not thousands of years. Study results show, however, that simple treatments can accelerate recovery rates substantially. Scarification and transplanting were highly effective treatments, with seeding and soil amendment with organic matter and compost also contributing to success, but to a lesser degree. The use of a mulch mat, in contrast, had no effect, either positive or negative. Assessments of success conducted within the first few years of treatment overestimate treatment efficacy, particularly the effectiveness of soil amendments and seeding.     

Biomass Based Sorption Cooling Systems for Cold Storage Applications

Controlled atmospheric storage is a widely popular technique for storage of fruits and vegetables. In this paper, the experimental studies on biomass powered absorption systems for cold storage applications using ammonia water as a working fluid pair is presented. The heat input to the absorption system is supplied by a producer gas obtained from a downdraft gasifier, using firewood as fuel. The system is designed and fabricated to store about 15 MT of fruits and vegetables, having a cooling capacity of 3 TR. The effect of sink temperature, solution flow rate, cooling water flow rate and biomass consumption on the performance of the system has been analyzed. It is found that the real co-efficient of performance of the system is around 0.35 - 0.2, considering the source-site factor for auxiliary power consumption. The operating Cost/h for the biomass based cold storage system is lower than the presently available conventional compression based units.     

A case study of an isolated wind powered electricity system meeting 100% of local demand

Using meteorological and electricity demand data for a 4-year period, electricity demand in Shetland was modeled to provide an estimate of the demand over a 30-year period from 1 January 1981. That modeled demand was then compared to estimated wind power output over the same period using the WAsP model. The wind farm output was estimated for a range of sizes of wind farm up to the consented 370 MW Viking Wind Farm in Shetland. Some wind power was available for 94% of the time and the 370 MW wind farm would meet 100% of demand for nearly 80% of the time. The statistics of single and accumulated deficits were calculated for a range of wind farms and estimates of the amount of additional generation capacity and additional power requirements were assessed. The study suggests that with storage, wind power in Shetland could meet all electricity demand in Shetland at around £130 to £150/MWh (excluding subsidy) and with a grid connection allowing the sale of excess power, those costs could be reduced.     

Defining the Diurnal Pattern of Snowmelt Using a Beta Distribution Function

Snow is an important component of the hydrologic cycle for many regions worldwide. In addition to vital water resources, snowmelt can be important for forest ecosystem dynamics and flood risk. However, standard design events in the United States lack a design snowmelt event, including only precipitation events, though snowmelt has been shown to be larger than rainfall. In this article, we present a method using hourly snow water equivalent data to develop and test a function for representing the diurnal pattern of snowmelt. A two‐parameter beta distribution function is modified for the purposes of this study and found to fit the pattern of snowmelt well with a root mean squared error of 0.008. Soil moisture sensors were additionally utilized to assess the timing of the snowmelt water outflow from the base of the snowpack that supports the shape of the function, but suggests that the timing of losses recorded on snow pillows lag as much as 3 h. Further testing of the function showed the shape of the function to be accurate. The methods developed and tested in this paper can be applied for design purposes comparing snowmelt and rainfall events or to improve hydrological models investigating processes such as streamflow or groundwater recharge.