Extrinsic modeling and simulation of helio-photovoltaic system: a case of single diode model

Simulation of helio-photovoltaic system is continuously undergoing revolution through diverse parameter modifications which closely mimic the experimental data. In retrospect, the current work has presented a nonlinear modification of equivalent circuit parameters and simulated the same for different semiconductors (crystalline and thin films); furthermore, established a mathematical relation between the coefficients of solar irradiance and module temperature (SIMT); moreover, investigated the influence of SIMT on the model parameters. The simulation upshot reveals that increment in solar irradiance (SI) intensifies the output current whereas an increase in module temperature (MT) diminishes the output voltage; the SIMT coefficients developed validated well with the manufacturers data; the influence of SI was evident on the photon current, diode current, and shunt resistance whereas the effect of MT was pronounced on the diode current, ideality factor, and shunt resistance. Thus, the provision made by this work is essential for advanced design and simulation of helio-photovoltaic systems.     

Longevity as an Animal Welfare Issue Applied to the Case of Foot Disorders in Dairy Cattle

In current dairy farming it is possible to run a profitable farm without having to adapt the system to the needs of dairy cows. In such systems the interests of the farmer and animals often diverge. Consequently, specific animal welfare problems occur. Foot disorders in dairy cattle are an illustrative example resulting from the specific methods of housing and management in current dairy farming. Foot disorders and the resulting lameness are considered the most important welfare problem in dairy farming. However, these foot disorders not only typify welfare problems related to certain housing systems, but they also lead to the premature culling of cows. The assessment of the impact of foot disorders on the welfare of dairy cows raised the question of whether premature culling affects animal welfare since it affects the longevity of a cow. We argue that this aspect of longevity is morally relevant as an animal welfare issue. In this paper we aim to explore whether longevity is both (a) a morally relevant aspect in the discussion on killing animals and (b) a constitutive element of animal welfare. In other words, we aim to explore whether longevity is an independent moral argument in an animal welfare discussion. We claim that longevity is not merely important as an indicator of animal welfare, but is also a constitutive element of animal welfare. We argue that we need a more integrated approach to animal welfare and that an assessment that includes the aspect of time is necessary. This view involves a shift from views on animal welfare in terms of functioning or feeling well to a view on animal welfare that includes the aspect of natural living in which species-specific development is important. To show the impact of these points of view, we look at the practical implications for choices concerning the management of foot disorders in dairy cattle.     

Long-Term Effectiveness of Restoration Treatments on Closed Wilderness Campsites

This study assessed long-term recovery of vegetation on six wilderness campsites in subalpine forests in Oregon that were closed to use and that received common restoration treatments (scarification, soil amendments, mulch, transplanting, and seeding). Vegetation cover was assessed every year for the first 7 years following treatment, as well as 10 and 15 years after treatment. This made it possible to compare long-term treatment effectiveness to short-term efficacy. Plots that were closed and not scarified had virtually no vegetation cover even after 15 years without use. If long-used campsites in these subalpine forests are simply closed and allowed to recover on their own, restoration of undisturbed conditions will require hundreds if not thousands of years. Study results show, however, that simple treatments can accelerate recovery rates substantially. Scarification and transplanting were highly effective treatments, with seeding and soil amendment with organic matter and compost also contributing to success, but to a lesser degree. The use of a mulch mat, in contrast, had no effect, either positive or negative. Assessments of success conducted within the first few years of treatment overestimate treatment efficacy, particularly the effectiveness of soil amendments and seeding.     

Artificial Groundwater Recharge Zones Mapping Using Remote Sensing and GIS: A Case Study in Indian Punjab

Artificial groundwater recharge plays a vital role in sustainable management of groundwater resources. The present study was carried out to identify the artificial groundwater recharge zones in Bist Doab basin of Indian Punjab using remote sensing and geographical information system (GIS) for augmenting groundwater resources. The study area has been facing severe water scarcity due to intensive agriculture for the past few years. The thematic layers considered in the present study are: geomorphology (2004), geology (2004), land use/land cover (2008), drainage density, slope, soil texture (2000), aquifer transmissivity, and specific yield. Different themes and related features were assigned proper weights based on their relative contribution to groundwater recharge. Normalized weights were computed using the Saaty’s analytic hierarchy process. Thematic layers were integrated in ArcGIS for delineation of artificial groundwater recharge zones. The recharge map thus obtained was divided into four zones (poor, moderate, good, and very good) based on their influence to groundwater recharge. Results indicate that 15, 18, 37, and 30 % of the study area falls under “poor,” “moderate,” “good,” and “very good” groundwater recharge zones, respectively. The highest recharge potential area is located towards western and parts of middle region because of high infiltration rates caused due to the distribution of flood plains, alluvial plain, and agricultural land. The least effective recharge potential is in the eastern and middle parts of the study area due to low infiltration rate. The results of the study can be used to formulate an efficient groundwater management plan for sustainable utilization of limited groundwater resources.     

Biomass Based Sorption Cooling Systems for Cold Storage Applications

Controlled atmospheric storage is a widely popular technique for storage of fruits and vegetables. In this paper, the experimental studies on biomass powered absorption systems for cold storage applications using ammonia water as a working fluid pair is presented. The heat input to the absorption system is supplied by a producer gas obtained from a downdraft gasifier, using firewood as fuel. The system is designed and fabricated to store about 15 MT of fruits and vegetables, having a cooling capacity of 3 TR. The effect of sink temperature, solution flow rate, cooling water flow rate and biomass consumption on the performance of the system has been analyzed. It is found that the real co-efficient of performance of the system is around 0.35 - 0.2, considering the source-site factor for auxiliary power consumption. The operating Cost/h for the biomass based cold storage system is lower than the presently available conventional compression based units.     

A case study of an isolated wind powered electricity system meeting 100% of local demand

Using meteorological and electricity demand data for a 4-year period, electricity demand in Shetland was modeled to provide an estimate of the demand over a 30-year period from 1 January 1981. That modeled demand was then compared to estimated wind power output over the same period using the WAsP model. The wind farm output was estimated for a range of sizes of wind farm up to the consented 370 MW Viking Wind Farm in Shetland. Some wind power was available for 94% of the time and the 370 MW wind farm would meet 100% of demand for nearly 80% of the time. The statistics of single and accumulated deficits were calculated for a range of wind farms and estimates of the amount of additional generation capacity and additional power requirements were assessed. The study suggests that with storage, wind power in Shetland could meet all electricity demand in Shetland at around £130 to £150/MWh (excluding subsidy) and with a grid connection allowing the sale of excess power, those costs could be reduced.     

Defining the Diurnal Pattern of Snowmelt Using a Beta Distribution Function

Snow is an important component of the hydrologic cycle for many regions worldwide. In addition to vital water resources, snowmelt can be important for forest ecosystem dynamics and flood risk. However, standard design events in the United States lack a design snowmelt event, including only precipitation events, though snowmelt has been shown to be larger than rainfall. In this article, we present a method using hourly snow water equivalent data to develop and test a function for representing the diurnal pattern of snowmelt. A two‐parameter beta distribution function is modified for the purposes of this study and found to fit the pattern of snowmelt well with a root mean squared error of 0.008. Soil moisture sensors were additionally utilized to assess the timing of the snowmelt water outflow from the base of the snowpack that supports the shape of the function, but suggests that the timing of losses recorded on snow pillows lag as much as 3 h. Further testing of the function showed the shape of the function to be accurate. The methods developed and tested in this paper can be applied for design purposes comparing snowmelt and rainfall events or to improve hydrological models investigating processes such as streamflow or groundwater recharge.