Ferric iron amendment increases Fe(III)-reducing microbial diversity and carbon oxidation in on-site wastewater systems

Onsite wastewater systems, or septic tanks, serve approximately 25% of the United States population; they are therefore a critical component of the total carbon balance for natural water bodies. Septic tanks operate under strictly anaerobic conditions, and fermentation is the dominant process driving carbon transformation. Nitrate, Fe(III), and sulfate reduction may be operating to a limited extent in any given septic tank. Electron acceptor amendments will increase carbon oxidation, but nitrate is toxic and sulfate generates corrosive sulfides, which may damage septic system infrastructure. Fe(III) reducing microorganisms transform all major classes of organic carbon that are dominant in septic wastewater: low molecular weight organic acids, carbohydrate monomers and polymers, and lipids. Fe(III) is not toxic, and the reduction product Fe(II) is minimally disruptive if the starting Fe(III) is added at 50–150 mg L^?1. We used ¹⁴C radiolabeled acetate, lactate, propionate, butyrate, glucose, starch, and oleic acid to demonstrate that short and long-term carbon oxidation is increased when different forms of Fe(III) are amended to septic wastewater. The rates of carbon mineralization to ¹⁴CO₂ increased 2–5 times (relative to unamended systems) in the presence of Fe(III). The extent of mineralization reached 90% for some carbon compounds when Fe(III) was present, compared to levels of 50–60% in the absence of Fe(III). ¹⁴CH₄ was not generated when Fe(III) was added, demonstrating that this strategy can limit methane emissions from septic systems. Amplified 16S rDNA restriction analysis indicated that unique Fe(III)-reducing microbial communities increased significantly in Fe(III)-amended incubations, with Fe(III)-reducers becoming the dominant microbial community in several incubations. The form of Fe(III) added had a significant impact on the rate and extent of mineralization; ferrihydrite and lepidocrocite were favored as solid phase Fe(III) and chelated Fe(III) (with nitrilotriacetic acid or EDTA) as soluble Fe(III) forms.     

Modeling of Ecological Footprint and Climate Change Impacts on Food Security of the Hill Tracts of Chittagong in Bangladesh

This paper presents an integrated and dynamic model for the management of the uplands of the Hill Tracts of Chittagong to predict food security and environmental loading for gradual transition of shifting agriculture land into horticulture crops and teak plantation, and crop land into tobacco cultivation. Food security status for gradual transmission of shifting agriculture land into horticulture crops and teak plantation, and crop land into tobacco cultivation is the best option for food security, but this causes the highest environmental loading resulting from tobacco cultivation. Considering both food security and environmental degradation in terms of ecological footprint, the best option is gradual transition of shifting agriculture land into horticulture crops which provides moderate increase in the food security with a relatively lower environmental degradation in terms of ecological footprint. Crop growth model InfoCrop was used to predict the climate change impacts on rice and maize production in the uplands of the Hill Tracts of Chittagong. Climate change impacts on the yields of rice and maize of three treatments of temperature, carbon dioxide and rainfall change (+0 °C, +0 ppm and +0 % rainfall), (+2 °C, +50 ppm and 20 % rainfall) and (+2 °C, +100 ppm and 30 % rainfall) were assessed. The yield of rice decreases for treatment 2, but it increases for treatment 3. The yield of maize increases for treatments 2 and 3 since maize is a C₄ plant. There is almost no change in food security at upazila (sub-district) level for the historical climate change scenario, but there is small change in the food security at upazila levels for IPCC climate change scenario.     

Bubble size distribution in a laboratory-scale electroflotation study

The performance of electroflotation (EF) is strongly influenced by the size of O₂ and H₂ bubbles. Therefore, in this study, the bubble sizes are measured in a lab-scale EF cell using a high-speed camera. The mean bubble size is found to vary in the range of 32.7–68.6 μm under different operating conditions. This study shows that the electrode material, current density, water pH, ionic strength, and frother (Tennafroth 250) concentration are important factors in controlling the bubble size. Furthermore, four mathematical distributions (normal, log-normal, Weibull, and gamma distributions) are fitted to the experimental data, among which the log-normal distribution is found to be the best fit based on the lower Anderson-Darling (AD) value.     

Integrated groundwater resource management in Indus Basin using satellite gravimetry and physical modeling tools

Reliable and frequent information on groundwater behavior and dynamics is very important for effective groundwater resource management at appropriate spatial scales. This information is rarely available in developing countries and thus poses a challenge for groundwater managers. The in situ data and groundwater modeling tools are limited in their ability to cover large domains. Remote sensing technology can now be used to continuously collect information on hydrological cycle in a cost-effective way. This study evaluates the effectiveness of a remote sensing integrated physical modeling approach for groundwater management in Indus Basin. The Gravity Recovery and Climate Experiment Satellite (GRACE)-based gravity anomalies from 2003 to 2010 were processed to generate monthly groundwater storage changes using the Variable Infiltration Capacity (VIC) hydrologic model. The groundwater storage is the key parameter of interest for groundwater resource management. The spatial and temporal patterns in groundwater storage (GWS) are useful for devising the appropriate groundwater management strategies. GRACE-estimated GWS information with large-scale coverage is valuable for basin-scale monitoring and decision making. This frequently available information is found useful for the identification of groundwater recharge areas, groundwater storage depletion, and pinpointing of the areas where groundwater sustainability is at risk. The GWS anomalies were found to favorably agree with groundwater model simulations from Visual MODFLOW and in situ data. Mostly, a moderate to severe GWS depletion is observed causing a vulnerable situation to the sustainability of this groundwater resource. For the sustainable groundwater management, the region needs to implement groundwater policies and adopt water conservation techniques.     

Earthquake mortality in Pakistan

A strong earthquake, measuring 7.6 on the Richter scale, hit northern Pakistan on 8 October 2005, causing massive destruction, including an official death toll of 73,276. Four cross-sectional surveys were performed in late 2005 to assess mortality before the event, on the day, and subsequently. Two surveys were community-based and two were situated in camps for internally displaced persons. Crude mortality rates were low in the 3.5 months preceding the earthquake (less than 0.1 deaths per 10,000 per day) and slightly higher in the six-to-eight weeks after the earthquake (ranging from 0.10–0.43 per 10,000 per day). On 8 October 2005, approximately two per cent of the population in one community survey died and around five per cent in the other three surveys. Children less than five years and adults more than or equal to 50 years tended to have a higher risk of mortality on the day of the disaster. These results corroborate the high mortality caused by the earthquake.     

Phosphorous in the environment: characteristics with distribution and effects,removal mechanisms,treatment technologies,and factors affecting recovery as minerals in natural and engineered systems

Environmental Science and Pollution Research - Phosphorus (P), an essential element for living cells, is present in different soluble and adsorbed chemical forms found in soil, sediment, and water....     

Zonal management of arsenic contaminated ground water in Northwestern Bangladesh

This paper used ordinary kriging to spatially map arsenic contamination in shallow aquifers of Northwestern Bangladesh (total area  35,000 km²). The Northwestern region was selected because it represents a relatively safer source of large-scale and affordable water supply for the rest of Bangladesh currently faced with extensive arsenic contamination in drinking water (such as the Southern regions). Hence, the work appropriately explored sustainability issues by building upon a previously published study (Hossain et al., 2007; Water Resources Management, vol. 21: 1245–1261) where a more general nation-wide assessment afforded by kriging was identified. The arsenic database for reference comprised the nation-wide survey (of 3534 drinking wells) completed in 1999 by the British Geological Survey (BGS) in collaboration with the Department of Public Health Engineering (DPHE) of Bangladesh. Randomly sampled networks of zones from this reference database were used to develop an empirical variogram and develop maps of zonal arsenic concentration for the Northwestern region. The remaining non-sampled zones from the reference database were used to assess the accuracy of the kriged maps. Two additional criteria were explored: (1) the ability of geostatistical interpolators such as kriging to extrapolate information on spatial structure of arsenic contamination beyond small-scale exploratory domains; (2) the impact of a priori knowledge of anisotropic variability on the effectiveness of geostatistically based management. On the average, the kriging method was found to have a 90% probability of successful prediction of safe zones according to the WHO safe limit of 10 ppb while for the Bangladesh safe limit of 50 ppb, the safe zone prediction probability was 97%. Compared to the previous study by Hossain et al. (2007) over the rest of the contaminated country side, the probability of successful detection of safe zones in the Northwest is observed to be about 25% higher. An a priori knowledge of anisotropy was found to have inconclusive impact on the effectiveness of kriging. It was, however, hypothesized that a preferential sampling strategy that honored anisotropy could be necessary to reach a more definitive conclusion in regards to this issue.     

Increasing trend of primary NO2 exhaust emission fraction in Hong Kong

Despite the successful reduction in roadside NO( x ) levels, no such decrease has been detected in roadside NO(2) concentration in Hong Kong. One underlying cause could be the rising primary NO(2) fraction of the total emission of NO( x ). Primary NO(2) can be particularly detrimental to Hong Kong because a large fraction of the population are exposed to the traffic-related primary pollutants in the street canyons formed by congested high-rise buildings. In this study, hourly mean concentration data for roadside nitrogen oxides (NO( x )), nitrogen dioxide (NO(2)), and background ozone (O(3)) were used to estimate the mean primary NO(2) fraction from vehicle exhausts in Hong Kong. An overall increasing trend was observed for the primary NO(2) fraction (f-NO(2)) values in all the three roadside air monitoring sites. The primary NO(2) as a fraction of total NO( x ) (f-NO(2)) increased approximately from 2% in 1998 to 13% in 2008 in Hong Kong. The two particular periods of rising f-NO(2) coincided with the two implementation periods of the diesel retrofit programs for the light-duty vehicles and heavy-duty vehicles. Future vehicle emission control strategies should target not only total NO( x ) but also primary NO(2). Health benefit or disease burden estimates should be taken into account and updated in the process of policy planning and evaluation.     

Development of Water-Borne Green Polymer Used as a Potential Nano Drug Vehicle and its In Vitro Release Studies

This paper describes an ecofriendly development of a nanodrug delivery vehicle from seed oil. The entire synthesis, starting from the ZnO nanoparticle to the polymeric vehicle is purely microwave assisted with minimal usage of organic solvents. Multifunctional features like enhanced UV absorbance, antimicrobial properties and appreciable in vitro release can be attributed to the nanoparticle loaded polymeric vehicle. Characterization of the synthesized species was done through FT-IR, ¹HNMR, SEM and XRD. The physical characterizations were carried out using conventional laboratory techniques.