Interactions Among the Copper Species and Forms in Sea Water/Sediments and Copper Bioaccumulation in Oysters

Abstract

Earlier papers indicated that the first incident of green discoloration in oysters (Crassostrea gigas) and the mass mortality observed in 1986 along the Taiwan Erhjin Chi coastal area were caused by the higher contents of total copper and copper species (mainly bioavailable and free ion) in sea water. the copper in sea water would be sorbed by suspended matter and transferred to sediments, and the copper in the sediments would also be desorbed to sea water. Processes of copper adsorption and desorption are the major factors influencing the contents of total copper and copper species in sea water and sediments. in this study, the Erhjin Chi sediments were mixed with sea water by a shaker technique. When the mixture was shaken for one hour, analogous to tidal mixing in estuaries, only copper desorption from sediments was observed. If the shaking time is increased for more than 3 hours, the copper released from the sediments was resorbed to the remaining solid phases. the higher the contents of mud (91.71%) and total copper (701 mg kg^?1) in sediments, the higher the copper desorption rate (1.86 ppm hr^?1) and copper adsorption rate (0.50 ppm hr^?1) were observed. in sediments containing lower mud (0.80%) and lower copper (43.5 mg kg^?1), the copper desorption and adsorption rates were 0.83 ppm hr^?1 and 0.22 ppm hr^?1, respectively. the interactions among the total copper and copper species in sea water and sediments, chemical and ecological parameters, and copper bioaccumulation in oysters in the Erhjin Chi estuarine and coastal area are also discussed.     

Ecological Survey of Coastal I Water Adjacent to Nuclear Power I Plants in Taiwan

A total of six nuclear reactors installed in three power plants, two along the northern and one along the southern coasts of Taiwan, started their operations one after another since October 1977. Owing to the large quantities of cooling water intake into and discharge from the plants, some environmental factors such as water temperature, chlorine, environmental radioactivity and nearshore currents may be significantly changed. Variations of these abiotic environmental factors may influence the biological activities in the ecosystem, particularly doing some kinds of damage to marine biological resources. Therefore, the possible environmental impact upon the biological systems including the fishery resources along the northern and southern coasts of Taiwan should be studied before and during the plant operation.

We have started the long-term programmes of biological, chemical and hydro-graphical surveys of the nuclear power plant sites on both northern (since July 1974) and southern (since July 1979) coasts of Taiwan. the survey items include ocean currents, physical and chemical properties of sea water, primary productivity, specific compositions and interspecific relationships among phyto- and zooplankton, algae, invertebrates, corals, and fishes; and radionuclides in water and biological specimens, and fishery statistics. in general, except for a few events, the operations of the six units of nuclear power plants have not produced detectable effects on the marine ecosystem. Radio activity levels and radionuclides in water and the biological specimens remained the same as background levels throughout the survey period. However, the events of coral bleaching and fish body anomalies caused by thermal discharges were observed respectively along the outlets of third and second Nuclear Power Plants. the purposes of this paper are to report and evaluate these two events during the operations of nuclear power plants in Taiwan.     

Factors controlling measurements of radon mass exhalation rate

Radon mass exhalation rate of soil samples was measured using an exhalation chamber of 10 dm(3) volume and a Lucas cell. The results show that mass of sample, grain size and water content influence the radon mass exhalation rate. For soil of (226)Ra activity concentration about 2500 Bq kg(-1) and samples within the range from 0.20 kg to 0.50 kg, the radon mass exhalation rate values are higher than those for samples of other masses. The observed radon exhalation rate is an inverse function of the average grain size. At the water content about 6% by weight, the radon mass exhalation rate reaches maximum, then it decreases with both increasing and decreasing of the water content in the sample.     

Evaluation of the emission characteristics of PCDD/Fs from electric arc furnaces

Distribution of PCDD/F (polychlorinated dibenzo-p-dioxin and polychlorinated dibenzofuran) congeners at two electric arc furnaces (EAFs) in Taiwan is evaluated via intensive stack sampling and analysis. Two kinds of exhaust system in EAFs including stack system and shutter system are selected for measuring dioxin emissions. In addition, dioxin emissions during oxidation and reduction stages at EAF-A were characterized. Results indicate that the PCDD/F concentration of stack gas in EAF-A was 4.39 ng/N m³ while total Toxic Equivalent Quantity (TEQ) concentration was 0.35 ng I-TEQ/N m³. The PCDD/F concentration of stack gas in EAF-B was 2.20 ng/N m³ and the TEQ concentration was 0.14 ng I-TEQ/N m³. 1,2,3,4,6,7,8-H_pCDF, OCDD and OCDF are the major contributors of the dioxin concentrations for two EAFs investigated and the percentage of PCDD/F in particulate phase increases as the chlorination level of the PCDD/F congener increases. The results obtained on gas/particulate partitioning of PCDD/Fs in flue gases prior to the APCD in EAFs indicate that more than 90% exists in particulate phase. In EAF-A, the PCDD/F concentration during oxidation stage is slightly higher than that measured during reduction stage, including the sampling points of CO converter outlet, prior to bag filter and stack. Majority of PCDD/Fs emitted from steel-making processes exists in particulate-phase (about 60–70%) at both EAFs investigated.     

An assessment of the risks associated with polychlorinated biphenyls found in the stomach contents of stranded Indo-Pacific Humpback Dolphins (Sousa chinensis) and Finless Porpoises (Neophocaena phocaenoides) from Hong Kong waters

The risks to Indo-Pacific Humpback Dolphins and Finless Porpoises associated with polychlorinated biphenyls (PCBs) were assessed. Stomach contents from twelve stranded Humpback Dolphins and sixteen stranded Finless Porpoises were collected. Concentrations of total and isomer-specific PCBs in the stomach contents were determined using dual-column gas chromatography equipped with electron capture detectors (GC-ECD). Risks due to the PCBs were assessed in three scenarios, based on total PCBs (summation of 41 PCB congeners), total toxicity equivalency (TEQs) and PCB 118, using the toxicity reference values (TRVs) as the threshold effects benchmarks. The calculated risk quotients (RQs) showed that risks due to PCBs were generally low or negligible. Specifically, RQs from total TEQs and total PCBs for Finless Porpoises are below one, suggesting that PCBs should be a low risk for the Finless Porpoise in Hong Kong waters. However, the Humpback Dolphin has RQs larger than 1 for total TEQs and total PCBs when the 95th percentile data were used in the evaluation. This indicates that further investigation may be needed to examine more closely the potential impact of toxic contaminants in the habitat of the Humpback Dolphin.     

Partitioning and removal of dioxin-like congeners in flue gases treated with activated carbon adsorption

Activated carbon adsorption is commonly used to control dioxin-like congener (PCDD/Fs and PCBs) emissions. Partitioning of PCDD/Fs and PCBs between vapor and solid phases and their removal efficiencies achieved with existing air pollution control devices (APCDs) at a large-scale municipal waste incinerator (MWI) and an industrial waste incinerator (IWI) are evaluated via intensive stack sampling and analysis. Those two facilities investigated are equipped with activated carbon injection (ACI) with bag filter (BF) and fixed activated carbon bed (FACB) as major PCDD/F control devices, respectively. Average PCDD/F and PCB concentrations of stack gas with ACI+BF as APCDs are 0.031 and 0.006ng-TEQ/Nm(3), and that achieved with FACB are 1.74 and 0.19ng-TEQ/Nm(3) in MWI and IWI, respectively. The results show that FACB could reduce vapor-phase PCDD/Fs and PCBs concentrations in flue gas, while the ACI+BF can effectively adsorb the vapor-phase dioxin-like congener and collect the solid-phase PCDD/Fs and PCBs in the meantime. Additionally, the results of the pilot-scale adsorption system (PAS) experimentation indicate that each gram activated carbon adsorbs 105-115ng-PCDD/Fs and each surface area (m(2)) of activated carbon adsorbs 10-25ng-PCDD/Fs. Based on the results of PAS experimentation, this study confirms that the surface area of mesopore+macropore (20-200A) of the activated carbon is a critical factor affecting PCDD/F adsorption capacity.     

Estimating the generation of recycled metals from obsolete motorcycles in Vietnam for ELV management

Journal of Material Cycles and Waste Management - The demand for various modes of transportation has significantly increased around the world due to rapid urbanization, the increase in population,...     

Arsenic in groundwaters of the Lower Mekong

Increasing incidence and awareness of arsenic in many alluvial aquifers of South-east Asia has raised concern over possible arsenic in the Lower Mekong Basin. Here, we have undertaken new research and reviewed many previous small-scale studies to provide a comprehensive overview of the status of arsenic in aquifers of Cambodia and the Cuu Long Delta of Vietnam. In general natural arsenic originates from the Upper Mekong basin, rather than from the local geology, and is widespread in soils at typical concentrations of between 8 and 16 ppm; (dry weight). Industrial and agricultural arsenic is localised and relatively unimportant compared to the natural alluvial arsenic. Aquifers most typically contain groundwaters of no more than 10 μg L⁻¹, although scattered anomalous areas of 10 to 30 μg L⁻¹ are also quite common. The most serious, but possibly ephemeral arsenic anomalies, of up to 600 μg L⁻¹, are associated with iron and organic-rich flood-plain sediments subject to very large flood-related fluctuations in water level, resulting in transient arsenopyrite dissolution under oxidizing conditions. In general, however, high-arsenic groundwaters result from the competing interaction between sorption and dissolution processes, in which arsenic is only released under reducing and slightly alkaline conditions. High arsenic groundwaters are found both in shallow water-tables, and in deeper aquifers of between 100 and 120 m depth. There is no evidence of widespread arsenicosis, but there are serious localised health-hazards, and some risk of low-level arsenic ingestion through indirect pathways, such as through contaminated rice and aquaculture. An almost ubiquitous presence of arsenic in soils, together with the likelihood of greatly increased groundwater extraction in the future, will require continuing caution in water resources development throughout the region.