Preliminary Studies on Converting Agricultural Waste into Biodegradable Plastics,Part I: Corn Distillers’ Dry Grain

Distillers dry grain (DDG) was derivatized either by carboxymethylation, glutaration, maleiation, phthallation, or succination in order to produce anionic materials suitable for complexation with soy protein isolate. Infrared spectroscopy confirmed that derivatization of DDG by all reagents was successful. Blending of derivatized anionic products with soy protein resulted in instant precipitation of gels. The gels were centrifuged, molded, and dried into solid pellets with tensile strengths as high as 1.67MPa, suggesting that these materials could be promising as biodegradable structural materials. Infrared spectroscopy suggested the possibility of complexes forming between soy protein isolate and each of the derivatized DDG samples.     

Degradation of chlorinated dioxin in denitrifying activated sludge from leachate treatment plant of a landfill

The degradation rate of dioxins added to the activated sludge from a leachate treatment plant of a landfill under denitrification conditions was estimated using six bioreactors. Over 99% of the added dioxins (600ng) were degraded within 7 days. Furthermore, continuous cultivation was carried out for 1 month. The activated sludge degraded 600ng of dioxins (that is, all of the added dioxins) placed in each reactor every 7 days, and this activity was maintained for 35 days. Under aerobic conditions with this sludge, the dioxins were not degraded in 7 days, but 90% of the 600ng of dioxins was degraded in 35 days. The high level of activity observed in the present study may only occur under anaerobic conditions, especially under denitrifying conditions.     

Analyses of incinerated ash of paper sludge: comparison with incinerated ash of municipal solid waste

Fourteen paper sludge samples were collected at seven representative pulp and paper mills in Japan, and were analyzed to obtain fundamental data on the reuse of paper sludge-incinerated ash as papermaking material. For comparison, incinerated ashes of municipal solid waste (MSW) were collected at MSW incineration plants in Tokyo, and analyzed by similar methods. Elementary and X-ray diffraction analyses revealed that the predominant elements in paper sludge samples are calcium, silicon, aluminum, and magnesium, which are derived from paper fillers, coating pigments, and coagulants used in papermaking and process effluent treatments. Similar results were also obtained for the MSW-incinerated ashes, indicating that major components in the collected MSW are paper-related materials. Incineration of paper sludge around 800°C is recommended in terms of high brightness of the incinerated ash, which has about 60% brightness. Calcium, silicon, and aluminum components in the paper sludge are fused or sintered by heating. Although paper-sludge-incinerated ashes have irregular shape and large particle size distributions, they may be used as papermaking materials after pulverization using a ball mill. The MSW-incinerated ashes have 5%–30% water-soluble fractions and low brightness, and thus incineration conditions must be changed to reuse the MSW-incinerated ash as a papermaking material.Part of this paper was presented at the 68th Research Conference of Japan Tappi, Tokyo, 2001     

Application of the rescue number to the evaluation of remediation technologies for contaminated ground

An improved rescue number, RN_SOIL, which is an indicator for evaluating remediation technologies for contaminated ground that is based on both the risk and the remediation cost, is proposed as a tool of risk communication. The risk posed by contaminated ground is indicated by the figure of treatment priority at time t, FTP(t), which represents the human health risk as the number of people affected by the contaminated ground at time t during the remediation process. The calculation of the value of FTP(t) is based on exposure to contaminants that have migrated through environmental media from the contaminated ground, and is estimated by using a CalTOX model and the Monte Carlo method. The integration of FTP(t) with time, which represents the cumulative number of people affected by the contaminated ground, is used to estimate the performance of individual remediation technologies in risk reduction. The figure of unprocessibility for waste (FUW), which represents difficulties in remediation, is expressed as the remediation cost. FUW is estimated by using actual costs per unit volume of remediated soil. As an overall performance value, the rescue number for each remediation technology for contaminated ground (RN_SOIL) is calculated by multiplication of the integral FTP(t) by FUW. Smaller values of RN_SOIL are judged to indicate a better technology. The rescue index (RI), calculated as the ratio of the reduction of the integral FTP(t) to FUW, indicates the cost-effectiveness of the remediation technologies. Successful estimation of the indices (FTP(t), integral FTP(t), FUW, RN_SOIL and RI) demonstrate the usefulness of these indices in risk communication.Part of this paper was presented at 13th meeting of Japan Society of Waste Management Experts (2002)     

Postconsumer polyethylene terephthalate (PET)/polyolefin blends through reactive processing

Increasing awareness of environmental and energy problems has promoted greater governmental interest in selected waste collection and consequently has attracted the interest of several research groups to the challenge of converting recovered plastics into useful materials. The reactive blending of postconsumer polyethylene terephthalate (PET) with different polyolefins (PO) was studied in attempts to obtain a new material with enhanced properties with respect to the starting materials. The success of the project depends mainly on the possibility of obtaining a compatibilized blend between two starting polymers that, from chemical and thermomechanical viewpoints, are very different. This was approached by employing polyolefins bearing functional groups capable of specific interaction or chemical reaction with PET end groups. Ternary blends of very low density polyethylene (VLDPE)/PET/functionalized polyolefin (FPO) in a weight composition of 70/20/10 and binary blends of FPO/PET in a weight composition of 90/10 were prepared and studied to obtain reinforced polyolefin thermoplastic materials. Reactive blending was achieved in a Brabender Plastograph with a mixing chamber of 30 or 50cm³, at 250°C, and 40rpm for 10min. Differential scanning calorimetry, scanning electron microscopy, and tensile tests were used to investigate the phase behavior, the efficiency of compatibilization, and the mechanical properties of the blends.     

The Wild Kangaroo Industry: Developing the Potential for Sustainability

Wildlife resources the world over have long been subject to harvest and management. As wildlife uses have grown, so too have the need and desire to ensure their sustainability. This new context of sustainability presents opportunities to merge ecological, economic and social elements to foster development. This paper presents the management and harvesting of wild kangaroos as an example of the potentially sustainable use of a natural resource. Some comparisons are drawn between the use of other wild living resources, deer in Europe and crayfish in Western Australia. However, sustainability of kangaroo species and the industry is not just a matter of market economics and ecology, it must also be socially sustainable. The public policy instrument of a statutory advisory board with a marketing function is proposed in order to integrate the cultural and social aspects of kangaroo management with the economic and ecological aspects. Through such integration, full sustainability of a wild resource then might be achieved.     

Learning to recognize novel predators under weakly acidic conditions: the effects of reduced pH on acquired predator recognition by juvenile rainbow trout

Summary. Recent studies have demonstrated that under weakly acidic conditions (pH 6.0), many prey fishes, including juvenile rainbow trout (Onchorhynchus mykiss), do not exhibit overt antipredator responses to conspecific chemical alarm cues. In laboratory trials, we investigated the potential effects of reduced pH on the ability of hatchery reared, predator naïve juvenile rainbow trout to acquire the recognition of a novel predator (yellow perch, Perca flavenscens). Initially, we exposed trout to the odour of a predatory yellow perch, buffered to pH 6.0 (weakly acidic) or pH 7.0 (neutral) paired with conspecific skin extracts (also buffered to pH 6.0 or 7.0) or a distilled water control. Juvenile trout exhibited significant increase in antipredator behaviour when exposed to neutral skin extract (pH 7.0). When retested 48 hours later to perch odour alone (pH 7.0), only trout initially conditioned with neutral skin extracts (pairs with either neutral or acidic perch odour) exhibited a learned recognition of perch odour as a predator risk. Those initially exposed to weakly acidic skin extract or the distilled water control did not show a learned response to predator odour. These results demonstrate that the ability to acquire the recognition of novel predators is impaired under weakly acidic conditions, as would occur in natural waterways affected by acidic precipitation.     

Sampling of airborne polycyclic aromatic hydrocarbons with semipermeable membrane devices

Semipermeable membrane devices (SPMDs) are nowadays used as passive samplers of organic pollutants. The knowledge of the sampling rate values (R_S) of each substance trapped on membranes is necessary to calculate their average concentration. Here we calculate R_S values for 16 polycyclic aromatic hydrocarbons using the comparison of active sampling method results and the amounts sequestered by SPMDs at varying exposure times.Selected article from the Regional Symposium on Chemistry and Environment, Krusevac, Serbia, June 2003, organized by Dr. Branimir Jovancicevic.