Review of Pesticide Retention Processes Occurring in Buffer Strips Receiving Agricultural Runoff1

Arora, Kapil, Steven K. Mickelson, Matthew J. Helmers, and James L. Baker, 2010. Review of Pesticide Retention Processes Occurring in Buffer Strips Receiving Agricultural Runoff. Journal of the American Water Resources Association (JAWRA) 46(3):618-647. DOI: 10.1111/j.1752-1688.2010.00438.x Abstract: Review of the published results shows that the retention of the two pesticide carrier phases (runoff volume and sediment mass) influences pesticide mass transport through buffer strips. Data averaged across different studies showed that the buffer strips retained 45% of runoff volume (ranging between 0 and 100%) and 76% of sediment mass (ranging between 2 and 100%). Sorption (soil sorption coefficient, K_oc) is one key pesticide property affecting its transport with the two carrier phases through buffer strips. Data from different studies for pesticide mass retention for weakly (K_oc < 100), moderately (100 < K_oc < 1,000), and strongly sorbed pesticides (K_oc > 1,000) averaged (with ranges) 61 (0-100), 63 (0-100), and 76 (53-100) %, respectively. Because there are more data for runoff volume and sediment mass retention, the average retentions of both carrier phases were used to calculate that the buffer strips would retain 45% of weakly to moderately sorbed and 70% of strongly sorbed pesticides on an average basis. As pesticide mass retention presented is only an average across several studies with different experimental setups, the application of these results to actual field conditions should be carefully examined.     

Environmental education research news

This report was by John F. Disinger, Professor of Natural Resources, and Jennifer L. Tomsen, Graduate Teaching Associate in Natural Resources, The Ohio State University, Columbus, Ohio, 43210–1085, USA.     

In situ soil water extraction: a review

The knowledge of the composition and fluxes of vadose zone water is essential for a wide range of scientific and practical fields, including water-use management, pesticide registration, fate of xenobiotics, monitoring of disposal from mining and industries, nutrient management of agricultural and forest ecosystems, ecology, and environmental protection. Nowadays, water and solute flow can be monitored using either in situ methods or minimally invasive geophysical measurements. In situ information, however, is necessary to interpret most geophysical data sets and to determine the chemical composition of seepage water. Therefore, we present a comprehensive review of in situ soil water extraction methods to monitor solute concentration, solute transport, and to calculate mass balances in natural soils. We distinguished six different sampling devices: porous cups, porous plates, capillary wicks, pan lysimeters, resin boxes, and lysimeters. For each of the six sampling devices we discuss the basic principles, the advantages and disadvantages, and limits of data acquisition. We also give decision guidance for the selection of the appropriate sampling system. The choice of material is addressed in terms of potential contamination, filtering, and sorption of the target substances. The information provided in this review will support scientists and professionals in optimizing their experimental set-up for meeting their specific goals.     

Who's in and why? A typology of stakeholder analysis methods for natural resource management

Stakeholder analysis means many things to different people. Various methods and approaches have been developed in different fields for different purposes, leading to confusion over the concept and practice of stakeholder analysis. This paper asks how and why stakeholder analysis should be conducted for participatory natural resource management research. This is achieved by reviewing the development of stakeholder analysis in business management, development and natural resource management. The normative and instrumental theoretical basis for stakeholder analysis is discussed, and a stakeholder analysis typology is proposed. This consists of methods for: i) identifying stakeholders; ii) differentiating between and categorising stakeholders; and iii) investigating relationships between stakeholders. The range of methods that can be used to carry out each type of analysis is reviewed. These methods and approaches are then illustrated through a series of case studies funded through the Rural Economy and Land Use (RELU) programme. These case studies show the wide range of participatory and non-participatory methods that can be used, and discuss some of the challenges and limitations of existing methods for stakeholder analysis. The case studies also propose new tools and combinations of methods that can more effectively identify and categorise stakeholders and help understand their inter-relationships.     

水合物法的天然气提氦技术研究

氦气是发展国防军工和高科技产业不可或缺的战略性物资之一.由于氦气在自然界中的富集度很低,目前工业规模化提氦来源主要是含氦天然气.常用的提氦方法有吸附法、吸收法、低温冷凝法、膜分离法等,但它们都不能很好地解决提氦难度大、成本高、规模化工业应用水平较低等缺点.因此,引入水合分离技术,利用含氦天然气各组分生成水合物的条件差异在水合反应过程中对氦气提浓,同时辅以催化脱氢工艺,实现粗氦的精制.     

GAGE DENSITY AND LOCATION FOR ESTIMATING MEAN ANNUAL PRECIPITATION IN MOUNTAINOUS AREAS1

ABSTRACT: Data from a network of 45 shielded precipitation gages on the Reynolds Creek Experimental Watershed in Southwestern Idaho were analyzed to determine the optimum gage density for estimating mean annual precipitation. Four subsets of the 45 gage network were used to derive a curve of mean annual precipitation versus number of gages with a confidence band at the 95 percent level. When less than 20 gages were used in the estimate, the confidence interval widens rapidly. Estimates were improved by stratifying gages on the basis of plant cover class or by elevation bands. Sixty-four percent of the variation in mean annual precipitation was accounted for by elevation and cover class. The aspect and hydrologic soil classification were not statistically significant.     

Statistical evaluation of an agricultural land suitability model

The land evaluation and site assessment (LESA) method has been used extensively in the United States to assess agricultural land suitability for different localities. Despite widespread use, LESA models rarely have been evaluated in a systematic, comprehensive manner. This article discusses development of a LESA system for Hawaii, the first statewide application of the LESA methodology. The empirical model was implemented with a computerized geographic information system (GIS). The system's efficiency, ability to discriminate among land parcels, and robustness to subjective model parameter values are evaluated with statistical analyses and map overlays of GIS data. Results show great potential to simplify the original model specification, primarily through deletion of marginal site assessment factors. System output was generally insensitive to the numeric values selected for model parameters, with exception of the ratio used to combine the land evaluation (LE) and site assessment (SA) component scores. Relative supplies of the differing land attributes measured by the two components must be considered in determining an appropriate LE:SA ratio for a given area.     

Upflow reactors for riparian zone denitrification

We used permeable reactive subsurface barriers consisting of a C source (wood particles), with very high hydraulic conductivities ( approximately 0.1-1 cm s(-1)), to provide high rates of riparian zone NO3-N removal at two field sites in an agricultural area of southwestern Ontario. At one site, a 0.73-m3 reactor containing fine wood particles was monitored for a 20-mo period and achieved a 33% reduction in mean influent NO3-N concentration of 11.5 mg L(-1) and a mean removal rate of 4.5 mg L(-1) d(-1) (0.7 g m(-2) d(-1)). At the second site, four smaller reactors (0.21 m3 each), two containing fine wood particles and two containing coarse wood particles, were monitored for a 4-mo period and were successful in attenuating mean influent NO3-N concentrations of 23.7 to 35.1 mg L(-1) by 41 to 63%. Mean reaction rates for the two coarse-particle reactors (3.2 and 7.8 mg L(-1) d(-1), or 1.5 and 3.4 g m(-2) d(-1)) were not significantly different (p > 0.2) than the rates observed in the two fine-particle reactors (5.0 and 9.9 mg L(-1) d(-1), or 1.8-3.5 g m(-2) d(-1)). A two-dimensional ground water flow model is used to illustrate how permeable reactive barriers such as these can be used to redirect ground water flow within riparian zones, potentially augmenting NO3- removal in this environment.     

Conceptual Models as Hypotheses in Monitoring Urban Landscapes

Many problems and challenges of ecosystem management currently are driven by the rapid pace and spatial extent of landscape change. Parks and reserves within areas of high human population density are especially challenged to meet the recreational needs of local populations and to preserve valued environmental resources. The complex problem of managing multiple objectives and multiple resources requires an enormous quantity of information, and conceptual models have been proposed as tools for organizing and interpreting this information. Academics generally prefer a bottom-up approach to model construction that emphasizes ecologic theory and process, whereas managers often use a top-down approach that takes advantage of existing information to address more pragmatic objectives. The authors propose a formal process for developing, applying, and testing conceptual models to be used in landscape monitoring that reconciles these seemingly opposing perspectives. The four-step process embraces the role of hypothesis testing in the development of models and evaluation of their utility. An example application of the process to a network of national parks in and around Washington, DC illustrates the ability of the approach to systematically identify monitoring data that would both advance ecologic theory and inform management decisions.