Transcriptional profiles induced by the Aryl Hydrocarbon Receptor agonists 2,3,7,8-tetrachlorodibenzo-p-dioxin, 2,3,7,8-tetrachlorodibenzofuran and 2,3,4,7,8-pentachlorodibenzofuran in primary rat hepatocytes

Toxicogenomics was used to examine mRNA expression profiles obtained from primary rat hepatocytes treated for 24 h with 0.01 or 1.0 nM 2,3,7,8-tetrachlorodibenzo-p-dioxin (2,3,7,8-TCDD), 0.02 or 2.0 nM 2,3,4,7,8-pentachlorodibenzofuran (2,3,4,7,8-PeCDF) and 0.1 or 10 nM 2,3,7,8-tetrachlorodibenzofuran (2,3,7,8-TCDF). The concentrations of 2,3,4,7,8-PeCDF and 2,3,7,8-TCDF were chosen to be equivalent to 2,3,7,8-TCDD’s concentration based on the toxic equivalency factor/toxic equivalent (TEF/TEQ) method for estimating biological potency. 2,3,7,8-TCDD at 1.0 nM altered the expression of 533 genes; 2,3,4,7,8-PeCDF at 2.0 nM altered 182 genes, and 2,3,7,8-TCDF at 10 nM altered 154 genes. Of these, 57 genes were affected by all three congeners. Agglomerative hierarchical clustering revealed distinct congener-dependent gene subclusters. Principal components analyses of the microarray data revealed that these congeners cluster independently of one another. Data presented here demonstrate that equivalent TEQ concentrations of 2,3,7,8-TCDD, 2,3,4,7,8-PeCDF and 2,3,7,8-TCDF, while altering the expression of a small battery of genes in common, also produce substantial congener specific alterations in gene expression.     

Risk assessments for forest trees: the performance of the ozone flux versus the AOT concepts

Published ozone exposure-response relationships from experimental studies with young trees performed at different sites across Europe were re-analysed in order to test the performance of ozone exposure indices based on AOTX (Accumulated exposure Over a Threshold of X nmol mol(-1)) and AF(st)Y (Accumulated Stomatal Flux above a threshold of Y nmol m(-2) s(-1)). AF(st)1.6 was superior, as compared to AOT40, for explaining biomass reductions, when ozone sensitive species with differing leaf morphology were included in the analysis, while this was not the case for less sensitive species. A re-analysis of data with young black cherry trees, subject to different irrigation regimes, indicated that leaf visible injuries were more strongly related to the estimated stomatal ozone uptake, as compared to the ozone concentration in the air. Experimental data with different clones of silver birch indicated that leaf thickness was also an important factor influencing the development of ozone induced leaf visible injury.     

Qualitative analysis of volatile organic compounds on biochar

Qualitative identification of sorbed volatile organic compounds (VOCs) on biochar was conducted by headspace thermal desorption coupled to capillary gas chromatographic-mass spectrometry. VOCs may have a mechanistic role influencing plant and microbial responses to biochar amendments, since VOCs can directly inhibit/stimulate microbial and plant processes. Over 70 biochars encompassing a variety of parent feedstocks and manufacturing processes were evaluated and were observed to possess diverse sorbed VOC composition. There were over 140 individual chemical compounds thermally desorbed from some biochars, with hydrothermal carbonization (HTC) and fast pyrolysis biochars typically possessing the greatest number of sorbed volatiles. In contrast, gasification, thermal or chemical processed biochars, soil kiln mound, and open pit biochars possessed low to non-detectable levels of VOCs. Slow pyrolysis biochars were highly variable in terms of their sorbed VOC content. There were no clear feedstock dependencies to the sorbed VOC composition, suggesting a stronger linkage with biochar production conditions coupled to post-production handling and processing. Lower pyrolytic temperatures (?350 °C) produced biochars with sorbed VOCs consisting of short carbon chain aldehydes, furans and ketones; elevated temperature biochars (>350 °C) typically were dominated by sorbed aromatic compounds and longer carbon chain hydrocarbons. The presence of oxygen during pyrolysis also reduced sorbed VOCs. These compositional results suggest that sorbed VOCs are highly variable and that their chemical dissimilarity could play a role in the wide variety of plant and soil microbial responses to biochar soil amendment noted in the literature. This variability in VOC composition may argue for VOC characterization before land application to predict possible agroecosystem effects.     

Behaviour of arsenic in forested catchments following a high-pollution period

Due to high availability of adsorption sites, forested catchments could be net sinks for pollutant arsenic both during the period of increasing and decreasing pollution. We tested this hypothesis along a north-south pollution gradient in spruce die-back affected areas of Central Europe. For two water years (2007-2008), we monitored As fluxes via spruce-canopy throughfall, open-area precipitation, and runoff in four headwater catchments (Czech Republic). Since 1980, atmospheric As inputs decreased 26 times in the north, and 13 times in the south. Arsenic export by runoff was similar to atmospheric inputs at three sites, resulting in a near-zero As mass balance. One site exhibited a net export of As (2.2 g ha⁻¹ yr⁻¹). In contrast, the preceding period (1995-2006) showed much higher As fluxes, and higher As export. Czech catchments do not serve as net sinks of atmospheric As. A considerable proportion of old industrial arsenic is flushed out of the soil.     

Evaluating the Illinois Stream Valley Segment Model as an Effective Management Tool

Stream habitat assessments are conducted to evaluate biological potential, determine anthropogenic impacts, and guide restoration projects. Utilizing these procedures, managers must first select a representative stream reach, which is typically selected based on several criteria. To develop a consistent and unbiased procedure for choosing sampling locations, the Illinois Department of Natural Resources and the Illinois Natural History Survey have proposed a technique by which watersheds are divided into homogeneous stream segments called valley segments. Valley segments are determined by GIS parameters including surficial geology, predicted flow, slope, and drainage area. To date, no research has been conducted to determine if the stream habitat within a valley segment is homogeneous and if different valley segments have varying habitat variables. Two abutting valley segments were randomly selected within 13 streams in the Embarras River watershed, located in east-central Illinois. One hundred meter reaches were randomly selected within each valley segment, and a transect method was used to quantify habitat characteristics of the stream channel. Habitat variables for each stream were combined through a principal components analysis (PCA) to measure environmental variation between abutting valley segments. A multivariate analysis of variance (MANOVA) was performed on PCA axes 1–3. The majority of abutting valley segments were significantly different from each other indicating that habitat variability within each valley segment was less than variability between valley segments (5.37 ≤ F ≤ 245.13; P ≤ 0.002). This comparison supports the use of the valley segment model as an effective management tool for identifying representative sampling locations and extrapolating reach-specific information.     

Composition and parameters of household bio-waste in four seasons

Bio-waste makes up almost half portion of municipal solid waste. The characterization of household bio-waste is important in determining the most appropriate treatment method. The differences in composition and parameters of bio-waste derived from urban settlement (U-bio-waste) and family houses (F-bio-waste) during the four climate seasons are described in this paper. Twelve components and 20 parameters for bio-waste were evaluated. The composition of U-bio-waste was almost steady over those seasons, unlike F-bio-waste. U-bio-waste was comprised mainly (58.2%) of fruit and vegetable debris. F-bio-waste was primarily made up of seasonal garden components. The amount of variation among seasons in both type of bio-waste increased in sequence: basic parameters < macro-elements < potentially toxic elements. Spearman’s correlations among proportions of individual components and parameters of bio-waste were found out. Results of this research could be utilized to support another composition and parameters of bio-waste and be suitable for establishing bio-waste processing.     

Photocatalytic degradation of gaseous toluene by using immobilized titania/silica on aluminum sheets

Purpose

The aim of this study was to prepare a highly active immobilized titania/silica photocatalyst and to test its performance in situ toward degradation of toluene as one of the major toxic indoor contaminants.

Methods

In this work, two different titania layers immobilized on Al sheets were synthesized via low temperature sol?Cgel method employing presynthesized highly active titania powders (Degussa P25 and Millennium PC500, mass ratio 1:1): (a) with a silica/titania binder and a protective layer and (b) without the binder. The photocatalysts were characterized by X-ray diffraction, nitrogen sorption measurements, scanning electron microscopy (SEM), infrared spectroscopy, and UV?Cvis diffuse reflectance spectroscopy (DRS). The in situ photocatalytic degradation of gaseous toluene was selected as a probe reaction to test photocatalytic activity and to verify the potential application of these materials for air remediation.

Results

Results show that nontransparent highly photocatalytically active coatings based on the silica/titania binder and homogeneously dispersed TiO₂ powders were obtained on the Al sheets. The crystalline structure of titania was not altered upon addition of the binder, which also prevented inhomogeneous agglomeration of particles on the photocatalyst surface. The photoactivity results indicate that the adsorption properties and photocatalytic activity of immobilized photocatalysts with the silica/titania binder and an underlying protective layer were very effective and additionally, they exhibited considerably improved adhesion and uniformity.

Conclusion

We present a new highly photocatalytically active immobilized catalyst on a convenient metallic support, which has a potential application in an air cleaning device.     

Time-resolved measurements of aerosol elemental concentrations in indoor working environments

We have measured the elemental concentrations in aerosols with a 2-h time resolution in two different types of working environment: a chemistry laboratory dealing with the processing of advanced nanoparticulate materials and a medium-sized machine workshop. Non-stop 10-day and 12-day samplings were performed at each location in order to determine the concentration trends during the non-working/working and weekday/weekend periods. Supplementary measurements of PM10 aerosols with a 2-day sample collection time were performed with a standard Gent PM10 sampler to compare the elemental concentrations with the time-averaged concentrations detected by the 2D step-sampler. The concentrations were determined a posteriori by analyzing the x-ray spectra of aerosol samples emitted after 3-MeV proton bombardment. The PM10 samples collected in the chemistry laboratory were additionally inspected by scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDX) to determine the chemical compositions of the individual particles. In the workshop, a total PM10 mass sampling was performed simultaneously with a minute resolution to compare the signal with typical outdoor PM10 concentration levels. A factor analysis of the time-resolved dataset points to six and eight factors in the chemistry laboratory and the machine workshop, respectively. These factors describe most of the data variance, and their composition in terms of different elements can be related to specific indoor activities and conditions. We were able to demonstrate that the elemental concentration sampling with hourly resolution is an excellent tool for studying the indoor air pollution. While sampling the total PM10 mass concentration with a minute resolution may lack the potential to identify the emission sources in a “noisy” environment, the time averaging on a day time scale is too coarse to cope with the working dynamics, even if elemental sensitivity is an option.     

Element Levels in Snakes in South Carolina: Differences Between a Control Site and Exposed Site on the Savannah River Site

Levels of 18 elements, including lead, mercury, selenium, and uranium, were examined in three species of snakes from an exposed and reference site on the Department of Energy's Savannah River Site in South Carolina. We tested the hypotheses that there were no differences as a function of species, and there were no difference between the exposed and control site for blood and muscle (tail) samples for banded water snake (Nerodia fasciata), brown water snake (N. taxispilota) and cottonmouth (Akistrodon piscivorous). The banded water snakes collected were significantly smaller than the other two species. For blood, there were significant species differences only for barium, copper, selenium, uranium and zinc, while for muscle tissue there were significant interspecific differences in aluminum, arsenic, barium, cobalt, cesium, copper, iron, lead, mercury, manganese, strontium, vanadium and zinc, suggesting that muscle tissue in the tail is a better indicator of potential interspecific differences. It is also easier logistically to collect tail tissue than blood. Where one species had significantly higher levels than the other species in muscle tissue levels, cottonmouth had higherlevels of five elements (aluminum, cobalt, lead, mercury, vanadium), brown water snake had two (lead, strontium), and banded water snake had only barium. There were few significant differences between the control and reference site for levels of blood, but several for muscle tissue. All three species had significantly higher levels of arsenic and manganese at Tim's Branch than the reference site, and nickel and uranium were significantly higher for banded watersnake and cottonmouth, the larger species. Individuals with high exposure of one element were exposed to high levels of other elements.