Starch- polyvinyl alcohol crosslinked film— performance and biodegradation

Starch-PVOH cast films were prepared with and without crosslinking agent (hexamethoxymethylmelamine) in the absence of plasticizer. Moisture absorption in films without crosslinking agent at a low relative humidity was similar to that of PVOH and increased as the relative humidity increased. Films with crosslinking agent showed moisture absorption linearly proportional to the relative humidity. Significant improvement in resistance to water disintegration for crosslinked starch-PVOH films was observed. While the tensile strength decreased with increased relative humidity, crosslinking significantly improved the tensile strength. Increased PVOH content improved elongation of films even when the relative humidity was 80% or higher. Biodegradation studies revealed that the degradation rate was negatively correlated with the PVOH content in films and crosslinking generated more converged degradation curves. Names are necessary to report factually on available data; however, the USDA neither guarantees nor warrants the standard of the product, and the use of the name by USDA implies no approval of the product to the exclusion of others that may also be suitable.     

Design parameters for fixed bed reactors of activated carbon developed from fertilizer waste for the removal of some heavy metal ions

Activated carbon, developed from fertilizer waste, has been used for the removal of Hg²⁺, Cr⁶⁺, Pb²⁺, and Cu²⁺. Mass transfer kinetic approach has been successfully applied for the determination of various parameters necessary for designing a fixed-bed absorber. Parameters selected are the length of the (PAZ) primary adsorption zone (δ), total time involved for the establishment of primary adsorption zone (t_x), mass rate of flow to the absorber (F_m), time for primary adsorption zone to move down its length (t_δ), amount of adsorbate adsorbed in PAZ from breakpoint to exhaustion (M_s), fractional capacity (f), time of initial formation of PAZ (t_f) and per cent saturation of column at break point. Chemical regeneration has been achieved with 1 M HNO₃.     

Assessing the Performance Level of a Water System

Water, Air, &; Soil Pollution: Focus - What should System Managers prefer? Systems that never fail or systems that remain safe during a failure? The present paper tries to give an answer to this...     

Review of in situ remediation technologies for lead,zinc, and cadmium in soil

This article presents a review of in situ technologies for the remediation of soils contaminated with lead, zinc, and/or cadmium. The objective of this review is to assess the developmental status of the available in situ technologies and provide a general summary of typical applications and limitations of these technologies. The literature review identified seven in situ remediation technologies—solidification/stabilization, vitrification, electrokinetic remediation, soil flushing, phytoextraction, phytostabilization, and chemical stabilization. These technologies were considered for their ability to meet a specific set of remediation objectives under a range of conditions. Each of these technologies has both strengths and weaknesses for addressing particular remedial situations discussed in the article for each of the technologies. A general summary of which technologies are most applicable to common remedial scenarios is also provided. © 2004 Wiley Periodicals, Inc.     

Electroremediation: A study of the influence of buffering behavior in contaminated soils

This article presents the results of an experimental study conducted to evaluate the behavior of two types of andisol soils found in Tenerife, Canary Islands, Spain. The soils were evaluated in relation to their buffering capacity when confronted with acid and alkaline fronts generated during electroremediation treatment. The study was conducted using a cell, which established a continuous flow of distilled water through electrode chambers to remove H⁺ and OH^? generated during electrolysis. The results indicate that the soils had sufficient buffer capacity to support variations in pH independent of the maintenance of flow of solution in the electrode chambers. Although the mechanism of migration was not affected, the flow of water favored the movement of ions by diffusion monitoring of the electrolytic current allowed for a real‐time parameter to act as an indicator of the quantity of ions available in regions near the electrodes. © 2004 Wiley Periodicals, Inc.     

Gender in the boss–subordinate relationship: a Nigerian study

The present study examines the interaction effect of gender of both subordinates and supervisors on subordinates' perception of differentiation of boss–subordinate relationship in an African setting. Data was collected from a total of 60 boss–subordinate dyads in four‐sex combinations obtained through a survey of a large five‐star hotel in Abuja, Nigeria. Results revealed that subordinates in opposite‐sex dyads perceived better quality of exchange than those in same‐sex dyads. The strongest quality of exchange was perceived in male boss–female subordinate dyad, while the weakest was perceived in female boss–female subordinate dyad. This emphasizes the importance of gender in the differentiation of boss–subordinate relationships in an African setting. Copyright © 2004 John Wiley & Sons, Ltd.     

Steady-state analyses for reactive distillation control: An MTBE case study

An approach, based purely on steady-state analyses, for synthesizing effective control structures for reactive distillation (RD) columns is presented. The main idea is to analyze the steady-state relationships between the manipulated (input) variables and the potential controlled (output) variables to identify input–output (IO) pairings that are sensitive and avoid steady-state multiplicities providing a large range of nearly linear operating region around the base case design. Traditional SISO control loops are then implemented using these IO pairings to obtain control structures that maintain the column near the design product purity and conversion for the anticipated primary disturbances. The Niederlinski Index is used to eliminate dynamically unstable pairings in control structures with multiple loops. The approach is demonstrated on an example MTBE RD column. The impact of steady-state multiplicities on control structure design is highlighted.     

Methane oxidation in slurry storage surface crusts

Livestock manure is a significant source of atmospheric methane (CH4), especially during liquid storage. In liquid manure (slurry) storages a surface crust may form naturally, or an artificial surface crust can be established. We investigated whether there is a potential for CH4 oxidation in this environment. Surface crust materials were sampled from experimental storages with cattle slurry (with natural crust) or anaerobically digested cattle slurry (with straw layer) that had been stored with or without a wooden cover. Extracts of surface crust material were incubated with 5.6% CH4 in the headspace, and methanotrophic activity was demonstrated in all four treatments following a 4- to 10-d lag phase. Subsequent incubation of field-moist surface crust material with 350 microL L(-1) CH4 also showed CH4 oxidation, indicating a potential for CH4 removal under practical storage conditions. There was no CH4 oxidation activity during incubation of autoclaved samples. Methane oxidation rates were 0.1 to 0.5 mg kg(-1) organic matter (OM) h(-1), which is comparable with the activity in wetlands and rice paddies. Partial drying increased CH4 oxidation to 0.2 to 1.4 mg kg(-1) OM h(-1), probably as a result of improved diffusivity within the surface crust. Rewetting reversed the stimulation of methanotrophic activity in some treatments, but not in others, possibly due to a decline in CH4 production in anaerobic volumes, or to growth of methanotrophs during incubation. This study presents direct evidence for methanotrophic activity in slurry storages. Measures to ensure crust formation with or without a solid cover appear to be a cost-effective greenhouse gas mitigation option.