EEG bioeffects on cochlear deaf from cellular phones

Objectives This paper aims to provide evidence of an inductive electromagnetic bioeffect on the human brain, which is independent from sound waves and produced by mobile phones, in proximal field, through correlating the EEG data obtained from electrodes placed on both normal and cochlear deaf individuals. Methods Two groups of subjects are placed under controlled electromagnetic conditions inside a Faraday chamber, 12 healthy and another 12 suffering from cochlear deafness). Each is sitting on a chair, fitted with additional support, and holding a cellular phone 2 cm away form the right auricular, in order to avoid a thermal effect as much as possible. All of them, relaxed and with their eyes closed, are EEG recorded in a basal state with their mobile phones off. Then, each of them is again recorded under the same conditions but with the mobile on and listening to the same conversation. In order to assess the observed EEG changes, a statistical analysis by means of the FFT (Fast Fourier Transform) was carried out. Results For both, healthy and cochlear deaf, assimilation or integration of the mobile phone signal by some electrodes is to be found. This is due to the increase of amplitudes for alpha and theta waves, whereas the signal is not integrated in other electrodes. By correlating the spectra of frequencies of corresponding EEG records for the same brain areas, we have not observed significative differences for both groups. Conclusions A possible electromagnetic direct inductive, non-thermal, bioeffect on the human brain is observed. This effect is produced by the use of mobile phones and it bears no relation to the sound waves.     

Modeling of n-butane ignition, combustion, and preflame oxidation in the 20-l vessel

The objective of the study reported herein is to simulate various physical and chemical phenomena accompanying fuel-rich n-butane–oxygen mixture preparation, ignition, preflame oxidation, and combustion in the standard 20-l explosion vessel, by applying mathematical models. Based on the computational fluid dynamics (CFD) simulations of the mixing process and natural convection of the ignition kernel, as well as on the analysis of the detailed reaction mechanism of n-butane oxidation, laminar flame propagation, and self-ignition, possible explanations for the phenomena observed experimentally have been suggested. The results of the study indicate that seemingly inflammable mixtures can become hazardous depending on the mixture preparation procedure and forced ignition timing.     

Fire and explosion risk assessment for large-scale oil export terminal

Now in Russian Federation and other countries large-scale oil terminals (volume of one tank exceeds 100 000 m³, total volume of tanks exceeds 300 000 m³) are designed and constructed. Therefore fire safety of such objects becomes a very important task, solution of which is hardly possible without detail fire risk assessment. This study is aimed to a solution of this problem. Potential, individual and social risks were calculated. The potential risk was defined as a frequency of occurrence of hazardous factors of fires and explosions in a given point of space (the so-called risk contours). The individual risk was defined as a frequency of injuring a given person by hazardous factors of fires and explosions. Time of presence of this person in hazardous zones (near the hazardous installation) is taken into account during calculations of the individual risk. Social risk was defined as a dependence of frequency of injuring a given number of people by hazardous factors of fires and explosions on this number. In practice the social risk is usually determined on injuring not less than 10 people.

The oil terminal under consideration includes the following main parts: crude oil storage consisting of three tanks of volume 100 000 m³ each, input crude oil pipeline of diameter 0.6 m, crude oil pumps, output crude oil pipeline of diameter 0.8 m, auxiliary buildings and facilities. The following main scenarios of tank fires have been considered: rim seal fire, pool fire on a surface of a floating roof, pool fire on a total cross-section surface of the tank, pool fire in a dyke, explosions in closed or semiclosed volumes. Fires and explosions in other parts of the terminal are also taken into account. Effects of escalation of accidents are considered.

Risk contours have been calculated both for the territory of the terminal and for the neighbouring space. The potential risk for the storage zone is near 10⁻⁴–10⁻⁵ year⁻¹, and at a distance 500 m from the terminal the potential risk values do not exceed 10⁻⁶ year⁻¹. The values of the individual risk for various categories of workers are in the range of 10⁻⁵–10⁻⁶ year⁻¹. Because of low number of the workers on the terminal and large distances to towns and villages the social risk value is negligible. These risk values are consistent with practice of the best oil companies, and fire hazard level of the terminal can be accepted as tolerable.     

THE IMPACT OF URBANIZATION ON THE DISTRIBUTION OF HEAVY METALS IN BOTTOM SEDIMENTS OF THE SADDLE RIVER1

ABSTRACT: A three-year study has been conducted on a 4.6 mile stretch of the Saddle River near Lodi, New Jersey. The primary objectives of this investigation were (1) to provide baseline information on the concentration and distribution of heavy metals in bottom sediments of the Saddle River; (2) to qualitatively evaluate which parameters affect this distribution; and (3) to determine the effect of urbanization on the concentration and distribution of these materials. Significant enrichments of several heavy metals were observed in bottom sediments of the lower Saddle River near Lodi, New Jersey, as compared to the upper Saddle River. Attempts to correlate metal concentrations in bottom sediments with chemical-oxygen demand were not successful in demonstrating a relationship between these two factors. Metal concentrations were found to be strongly dependent upon particle size. In general, metal concentrations in bottom sediments increased with decreasing partical diameter. However, metals enrichment was observed to be considerably greater in the larger sediment fractions studied (>420μ) than the smaller sediment fractions as one proceeded downstream through the urban area. Since the larger sediment fractions are least effected by scour and transport they may best reflect the effect of urbanization on the distribution of heavy metals over an extended period of time at a given location.     

OPTIMAL WATER USE AND SALINITY CONTROL FOR ENERGY - UPPER COLORADO RIVER BASIN1

ABSTRACT: The Upper Colorado River Basin contains appreciable amounts of undeveloped fuel resources. Large quantities of oil shale, coal, and uranium have attracted recent economic and commercial interests. Development of these resources and subsequent conversion to alternative energy forms require an adequate supply of water. Water use for large scale energy development will place increasing demands on an already overstressed allocation of Colorado River water. Present water quality is at a concentration where increased salinity will result in economic detriments to holders of downstream water rights. The salt and water exchange in mining, processing, and spent fuel disposal processes has been incorporated as part of a two-level minimum cost linear programming algorithm. Mathematical simulation results provide an optimal use of Upper Colorado River water for levels of energy output such that salinity concentrations are maintained below predetermined levels.     

HYDROLOGIC EFFECTS FROM CHANGES IN GROUND WATER PUMPAGE1

ABSTRACT: Simulation of a large stream-aquifer system in Nebraska has been accomplished for the period from 1975 to 2020 to determine effects of controls on ground water pumpage. Three scenarios tested consisted of average annual withdrawals of 15.2 ac-in/ac (FUTURE 1), 14.8 ac-in/ac (FUTURE 2), and 9.8 ac-in/ac (FUTURE 3). The highest quantity represents the historical tendency; while the 14.8 in. figure represents a slight reduction and also represents an equalization of irrigation application efficiencies throughout the area. The lowest figure represents a substantial increase in application efficiency. Comparisons between simulated ground water elevations indicate maximum savings of FUTURE 2 over FUTURE 1 of less than 8 ft. FUTURE 3 ft. FUTURE 3 levels are projected to be a maximum of approximately 13 ft. higher than FUTURE 1's. The relatively small savings from reductions in pumpage result primarily from recirculation effects. Differences between ground water contributions to stream flow are small for all scenarios. These contributions decrease with time and increasing pumpage amounts. Base flow rates at the end of the simulation are approximately 25 percent of those at the beginning.     

OPTIMAL RESERVOIR MANAGEMENT AND CROP PLANNING UNDER DETERMINISTIC AND STOCHASTIC INFLOWS1

ABSTRACT: This study analyzes planning under deterministic and stochastic inflows for the Mayurakshi project in India. Models are developed to indicate the optimal storage of reservoir water, the transfer of water to the producing regions, and the spillage of water from the reservoir, if needed. A deterministic programming model was first formulated to represent the existing situation. A chance-constrained model then was constructed to evaluate potential violations of the deterministic model. Both models were quantified for the command area. Data were collected from surveys of the area and from government agencies. Both the deterministic and change-constrained models suggest a more intensive cropping program in the region. Both emphasize more dependence on rabi and less on kharif crops. The chance-constrained especially suggests use of more water in the rabi season. Important chances in cropping programs and labor use take place under the chance-constrained model.     

Cumulative silvicultural impacts on watersheds: A hydrologic and regulatory dilemma

Because of the nature of watersheds, the hydrologic and erosional impacts of logging and related road-building activities may move offsite, affecting areas downslope and downstream from the operation. The degree to which this occurs depends on the interaction of many variables, including soils, bedrock geology, vegetation, the timing and size of storm events, logging technology, and operator performance. In parts of northwestern California, these variables combine to produce significant water quality degradation, with resulting damage to anadromous fish habitat.Examination of recent aerial photographs, combined with a review of public records, shows that many timber harvest operations were concentrated in a single 83 km² watershed in the lower Klamath River Basin within the past decade. The resulting soil disturbance in this case seems likely to result in cumulative off-site water quality degradation in the lower portion of the Basin.In California, both state and federal laws require consideration of possible cumulative effects of multiple timber harvest operations. In spite of recent reforms that have given the state a larger role in regulating forest practices on private land, each timber harvest plan is still evaluated in isolation from other plans in the same watershed. A process of collaborative state-private watershed planning with increased input of geologic information offers the best long-term approach to the problem of assessing cumulative effects of multiple timber harvest operations. Such a reform could ultimately emerge from the ongoing water quality planning process under Section 208 of the amended Federal Water Pollution Control Act.     

A methodological assessment of raw materials in the UK

Many projects have attempted to model the consumption and recycling patterns of important raw materials, but without assessing the significance of that raw material to the UK. This article methodically assesses all the factors which influence the importance of each raw material, and ranks them in descending order of importance. Sensitivity analyses confirm that the resultant ranking is largely independent of factors used. Copper, oil, iron and steel, and aluminium, are the four most significant materials. This work provided the justification for a detailed examination of the copper industry and, in particular, the significance of recycling.