Tissue distribution of perfluoroalkyl acids and health status in wild Mozambique tilapia (Oreochromis mossambicus) from Loskop Dam, Mpumalanga, South Africa

This study examined concentrations of 15 perfluoroalkyl acids (PFAAs) in tissues from male Mozambique tilapia (Oreochromis mossambicus) collected at Loskop Dam, Mpumalanga, South Africa in 2014 and 2016. Nine of the 15 PFAAs were detected frequently and were included in statistical analysis and included two of the most commonly known PFAAs, perfluorooctanesulfonic acid (PFOS) (median, 41.6 ng/g) and perfluorooctanoic acid (PFOA) (median, 0.0825 ng/g). Of the tissues measured, plasma (2016 and 2014 median, 22.2 ng/g) contained the highest PFAA burden followed by (in descending order): liver (median, 11.6 ng/g), kidney (median, 9.04 ng/g), spleen (median, 5.92 ng/g), adipose (median, 2.54 ng/g), and muscle (median, 1.11 ng/g). Loskop Dam tilapia have been affected by an inflammatory disease of the adipose tissue known as pansteatitis, so this study also aimed to investigate relationships between PFAA tissue concentrations and incidence of pansteatitis or fish health status. Results revealed that healthy tilapia exhibited an overall higher (p-value < 0.05) PFAA burden than pansteatitis-affected tilapia across all tissues. Further analysis showed that organs previously noted in the literature to contain the highest PFAA concentrations, such as kidney, liver, and plasma, were the organs driving the difference in PFAA burden between the two tilapia groups. Care must be taken in the interpretations we draw from not only the results of our study, but also other PFAA measurements made on populations (human and wildlife alike) under differing health status.     

Development of a biaxial loading frame for sheet metal

Characterization of the evolving yield loci and forming limit diagrams for sheet materials under biaxial loading is necessary for the development of accurate sheet metal forming process simulations. Biaxial tension testing has been shown to have significant advantages over the current computational and experimental methods for such material characterization; however, the few commercially available loading frames are far too large and expensive to be practical for most metal forming research laboratories. In this paper, the design of a practical servohydraulic biaxial loading frame is presented. The design, control, and operation of the loading frame are discussed in detail, and experimental data is provided to validate the effectiveness of the control system with respect to specimen center shifting.     

The theory of planned behavior as mediator of the effect of parental supervision: a study of intentions to violate driving rules in a representative sample of adolescents

INTRODUCTION: The study reported here was designed to test the ability of the theory of planned behavior to mediate the effect of parental supervision on adolescents' intentions to violate driving rules. METHOD: A representative sample of 1,654 adolescents completed questionnaires during individual and anonymous interviews carried out at their schools. RESULTS: Results showed that age, gender, prior risky driving-behavior, and parental supervision significantly predict intentions to violate driving rules. Attitude and the subjective norm partially mediate the effect of age, prior behavior, and parental supervision. Perceived behavioral control does not predict intention and is not predicted by other variables. IMPACT: The results suggest that social cognitive variables partially mediate the effect of parenting practices such as supervision.     

Secondary analysis of time of day on simulated driving performance

PROBLEM: Age and gender are frequently controlled for in studies of driving performance, but the effects of time of day or circadian cycles on performance are often not considered. Previous research on time of day effects of simulated driving is contradictory and provides little guidance for understanding the impact of these variables on results. METHODS: Using driving simulator data from 79 subjects ages 18 to 65, this paper focuses on the impact of age, gender, and time of day on the simulated driving performance of subjects who self-selected the time of participation. RESULTS: Time of day effects were consistently evident for drivers' speed overall and across different simulated environments. Drivers in the late afternoon period consistently drove significantly slower than drivers in other time periods. Age and gender affected speed such that women and those participants 50 and older tended to drive more slowly. Time of day also had an effect on reaction time and on speed variability measures. Gender did not have significant effects on reaction time or variability measures, but age effects were present. SUMMARY: Taken together, the results suggest that time of day effects should be considered as part of simulated driving performance, and that interactions between time of day and other variables, notably age, should be controlled for as part of future research. IMPACT ON INDUSTRY: Implications of these findings on current efforts for older driver testing are discussed.     

Origin of major ions in monthly rainfall events at the Bamenda Highlands, North West Cameroon

Rainwater characteristics can reveal emissions from various anthropogenic and natural sources into the atmosphere. The physico-chemical characteristics of 44 monthly rainfall events （collected between January and December 2012） from 4 weather stations （Bamenda, Ndop plain, Ndawara and Kumbo） in the Bamenda Highlands （BH） were investigated. The purpose was to determine the sources of chemical species, their seasonal inputs and suitability of the rainwater for drinking. The mean pH of 5 indicated the slightly acidic nature of the rainwater. Average total dissolved solids （TDS） were low （6.7 mg/L）, characteristic of unpolluted atmospheric moisture/air. Major ion concentrations （mg/L） were low and in the order K＋ 〉 Ca2＋ 〉 Mg2~ 〉 Na＋ for cations and NO3 〉〉 HCO3 〉 SO] 〉 CI- 〉 PO3- 〉 F- for anions. The average rainwater in the area was mixed Ca-Mg-SO4-CI water type. The CI-/Na＋ ratio （1.04） was comparable to that of seawater （1.16）, an indication that N a＋ and CI originated mainly from marine （Atlantic Ocean） aerosols. High enrichments of Ca2＋, Mg2＋ and SO2- to Na＋ ratios relative to seawater ratios （constituting 44% of the total ions） demonstrated their terrigenous origin, mainly from Saharan and Sahelian arid dusts. The K＋/Na＋ ratio （2.24）, which was similar to tropical vegetation ash （2.38）, and NO3 was essentially from biomass burning. Light （〈 100 mm） pre-monsoon and post-monsoon convective rains were enriched in major ions than the heavy （〉 100 mm） monsoon rains, indicating a high contribution of major ions during the low convective showers. Despite the acidic nature, the TDS and major ion concentrations classified the rainwater as potable based on the WHO guidelines.     

Circumpolar status of Arctic ptarmigan: Population dynamics and trends

Rock ptarmigan (Lagopus muta) and willow ptarmigan (L. lagopus) are Arctic birds with a circumpolar distribution but there is limited knowledge about their status and trends across their circumpolar distribution. Here, we compiled information from 90 ptarmigan study sites from 7 Arctic countries, where almost half of the sites are still monitored. Rock ptarmigan showed an overall negative trend on Iceland and Greenland, while Svalbard and Newfoundland had positive trends, and no significant trends in Alaska. For willow ptarmigan, there was a negative trend in mid-Sweden and eastern Russia, while northern Fennoscandia, North America and Newfoundland had no significant trends. Both species displayed some periods with population cycles (short 3–6 years and long 9–12 years), but cyclicity changed through time for both species. We propose that simple, cost-efficient systematic surveys that capture the main feature of ptarmigan population dynamics can form the basis for citizen science efforts in order to fill knowledge gaps for the many regions that lack systematic ptarmigan monitoring programs.

     

Bioaerosol sampling by a personal rotating cup sampler CIP 10-M

High concentrations of bioaerosols containing bacterial, fungal and biotoxinic matter are encountered in many workplaces, e.g. solid waste treatment plants, waste water treatment plants and sewage networks. A personal bioaerosol sampler, the CIP 10-M (M-microbiologic), has been developed to measure worker exposure to airborne biological agents. This sampler is battery operated; it is light and easy to wear and offers full work shift autonomy. It can sample much higher concentrations than biological impactors and limits the mechanical stress on the microorganisms. Biological particles are collected in 2 ml of liquid medium inside a rotating cup fitted with radial vanes to maintain an air flow rate of 10 l min(-1) at a rotational speed of approximately 7,000 rpm. The rotating cup is made of sterilisable material. The sampled particles follow a helicoidal trajectory as they are pushed to the surface of the liquid by centrifugal force, which creates a thin vertical liquid layer. Sterile water or another collecting liquid can be used. Three particle size selectors allow health-related aerosol fractions to be sampled according to international conventions. The sampled microbiological particles can be easily recovered for counting, incubation or further biochemical analysis, e.g., for airborne endotoxins. Its physical sampling efficiency was laboratory tested and field trials were carried out in industrial waste management conditions. The results indicate satisfactory collection efficiency, whilst experimental application has demonstrated the usefulness of the CIP 10-M personal sampler for individual bioaerosol exposure monitoring.     

Status of the Riparian Ecosystem in the Upper San Pedro River, Arizona: Application of an Assessment Model

A portion of Arizona’s San Pedro River is managed as a National Riparian Conservation Area but is potentially affected by ground-water withdrawals beyond the conservation area borders. We applied an assessment model to the Conservation Area as a basis for monitoring long-term changes in riparian ecosystem condition resulting from changes in river water availability, and collected multi-year data on a subset of the most sensitive bioindicators. The assessment model is based on nine vegetation bioindicators that are sensitive to changes in surface water or ground water. Site index scores allow for placement into one of three condition classes, each reflecting particular ranges for site hydrology and vegetation structure. We collected the bioindicator data at 26 sites distributed among 14 reaches that had similar stream flow hydrology (spatial flow intermittency) and geomorphology (channel sinuosity, flood-plain width). Overall, 39% of the riparian corridor fell within condition class 3 (the wettest condition), 55% in condition class 2, and 6% in the driest condition class. Condition class 3 reaches have high cover of herbaceous wetland plants (e.g., Juncus and Schoenoplectus spp.) along the perennial stream channel and dense, multi-aged Populus-Salix woodlands in the flood plain, sustained by shallow ground water in the stream alluvium. In condition class 2, intermittent stream flows result in low cover of streamside wetland herbs, but Populus-Salix remain abundant in the flood plain. Perennial wetland plants are absent from condition class 1, reflecting highly intermittent stream flows; the flood plain is vegetated by Tamarixa small tree that tolerates the deep and fluctuating ground water levels that typify this reach type. Abundance of herbaceous wetland plants and growth rate of Salix gooddingii varied between years with different stream flow rates, indicating utility of these measures for tracking short-term responses to hydrologic change. Repeat measurement of all bioindicators will indicate long-term trends in hydro-vegetational condition.     

Nitrogen removal in valley bottom wetlands: assessment in headwater catchments distributed throughout a large basin

Although the reduction of nutrient loading between uplands and streams is sometimes considered evidence of the effect of wetlands acting as buffer zones, the influence of valley bottom wetlands (VBWs) on NO(3)(-) loading has seldom been assessed at the catchment scale. The objective of this study was to quantify the impact of VBWs on NO(3)(-) concentrations in streams in the Brittany region of France. We analyzed the spatial variation in NO(3)-N concentrations in 18 headwater catchments located in a 400-km(2) basin, with varying topographic, climatic, and agricultural intensity conditions. Approximately every 10 d, water was sampled during the high flow season. We investigated the relationships between the mean NO(3)(-) concentration and different characteristics of the catchments: (i) the amount of effective rainfall, i.e., the combined effect of precipitation and actual evapotranspiration on discharge and chemical dilution, (ii) the intensity of farming, i.e., the area used for farming in the catchments and the surplus of the agricultural N budget, and (iii) the relative area of VBWs. Although the first two characteristics were the main factors controlling N concentration variability, a step-by-step regression allowed us to attribute a significant part of the NO(3)(-) concentration decrease to the increase of VBW area in each catchment. For an increase of VBW area from 11 to 16%, the NO(3)-N concentration decreased from 5.3 to 4.2 mg L(-1). Therefore in this basin, VBWs reduced the NO(3)(-) concentrations in streams with sources in agricultural fields by 30%. This work demonstrates the contribution of natural VBWs to NO(3)(-) removal at the catchment scale compared to other sources of variation, which is a current need for integrating water quality criteria into wetland management.     

Low‐concentration hydrogen peroxide decontamination for Bacillus spore contamination in buildings

Remediation and recovery efforts after a release of Bacillus anthracis (anthrax) spores may be difficult and costly. In addition, response and recovery technologies may be focused on critical resources, leaving the small business or homeowner without remediation options. This study evaluates the efficacy of relatively low levels of hydrogen peroxide vapor (HPV) delivered from off‐the‐shelf equipment for the inactivation of Bacillus spores within an indoor environment. Decontamination evaluations were conducted in a house using both Bacillus atrophaeus var. globigii (Bg; as surrogates for B. anthracis) inoculated on the carpet and galvanized metal as coupons and Geobacillus stearothermophilus (Gs) as biological indicators on steel. The total decontamination time ranged from 4 to 7 days. Using the longer exposure times, low concentrations of HPV (average levels below 20 parts per million) effectively inactivated Bg and Gs spores on the materials tested. The HPV was generated with commercial humidifiers and household‐strength hydrogen peroxide solutions. The presence of home furnishings did not have a significant impact on HPV efficacy. This simple, inexpensive, and effective decontamination method could have significant utility for remediation following a B. anthracis spore release, such as following a terrorist attack.