Evaluating the Effect of a Mechanical Adjunct to Improve the Installation of Child Restraint Systems to Vehicles

Objectives: We explored if an alternative CRS design that utilized a mechanical adjunct to amplify the force applied to the adult seat belt (intervention CRS) results in more accurate and secure attachment between the CRS and the vehicle compared to similar CRS models that use LATCH or the existing adult seat belt. We conducted three separate studies to address this question and additionally explored: (1) the contribution of prior CRS installation experience (Study 1), (2) the value-added of CRS labeling (Study 2), and (3) paper-based vs. video instructions (Study 3).

Methods: In Studies 1 and 2 we assessed a forward facing combination CRS design (intervention CRS) compared to a commercially available LATCH equipped model (control CRS) and in Study 3 we conducted a similar study using a convertible model of both the intervention and control CRS. Participants installed both CRS in a contemporary minivan and could choose which type of attachment to use for the control CRS (LATCH or seat belt); order of installation was counter-balanced. Evaluators systematically examined installations for accuracy and security.

Results: Study 1: A greater proportion of participants in both the experienced and inexperienced groups was able to securely install the intervention CRS compared to the control CRS: (45% vs. 16%, p =.0001 for experienced) and (37% vs. 6%, p =.003 for inexperienced). No differences between the CRS were observed for accuracy of installation in either user group. Study 2: A greater proportion of participants were able to securely install the enhanced intervention CRS compared to the control CRS: (62% vs. 9%, p =.001). The intervention CRS demonstrated reduced installation accuracy: (30% vs. 61%, p =.001). Study 3: A greater proportion of participants was able to securely install the intervention CRS compared to the control CRS: 79% vs. 66% p =.03, but this effect was smaller than in the previous studies. Participants were less likely to achieve an accurate installation with the intervention CRS compared to the control CRS: 54% vs. 79%, p =.004. Common accuracy errors in each study included twisting or misrouting the seatbelt when installing the intervention CRS.

Conclusions: Our results suggest that novel CRS designs that utilize mechanical advantage to facilitate attachment of the CRS to the vehicle result in a tighter installation compared to LATCH equipped models, but an increase in accuracy errors occurred.     

Controls on Temperature in Salmonid‐Bearing Headwater Streams in Two Common Hydrogeologic Settings,Kenai Peninsula,Alaska

Headwater streams are the most numerous in terms of both number and length in the conterminous United States and play important roles as spawning and rearing grounds for numerous species of anadromous fish. Stream temperature is a controlling variable for many physical, chemical, and biological processes and plays a critical role in the overall health and integrity of a stream. We investigated the controls on stream temperature in salmon‐bearing headwater streams in two common hydrogeologic settings on the Kenai Peninsula, Alaska: (1) drainage‐ways, which are low‐gradient streams that flow through broad valleys; and (2) discharge‐slopes, which are high gradient streams that flow through narrow valleys. We hypothesize local geomorphology strongly influences surface‐water and groundwater interactions, which control streamflow at the network scale and stream temperatures at the reach scale. The results of this study showed significant differences in stream temperatures between the two hydrogeologic settings. Observed stream temperatures were higher in drainage‐way sites than in discharge‐slope sites, and showed strong correlations as a continuous function with the calculated topographic metric flow‐weighted slope. Additionally, modeling results indicated the potential for groundwater discharge to moderate stream temperature is not equal between the two hydrogeologic settings, with groundwater having a greater moderating effect on stream temperature at the drainage‐way sites.     

Seasonal and Regional Patterns in Performance for a Baltic Sea Drainage Basin Hydrologic Model

This study evaluates the ability of the Catchment SIMulation (CSIM) hydrologic model to describe seasonal and regional variations in river discharge over the entire Baltic Sea drainage basin (BSDB) based on 31 years of monthly simulation from 1970 through 2000. To date, the model has been successfully applied to simulate annual fluxes of water from the catchments draining into the Baltic Sea. Here, we consider spatiotemporal bias in the distribution of monthly modeling errors across the BSDB since it could potentially reduce the fidelity of predictions and negatively affect the design and implementation of land‐management strategies. Within the period considered, the CSIM model accurately reproduced the annual flows across the BSDB; however, it tended to underpredict the proportion of discharge during high‐flow periods (i.e., spring months) and overpredict during the summer low flow periods. While the general overpredictions during summer periods are spread across all the subbasins of the BSDB, the underprediction during spring periods is seen largely in the northern regions. By implementing a genetic algorithm calibration procedure and/or seasonal parameterization of subsurface water flows for a subset of the catchments modeled, we demonstrate that it is possible to improve the model performance albeit at the cost of increased parameterization and potential loss of parsimony.     

Use of agricultural land evaluation and site assessment in Whitman County,Washington, USA

Whitman County, Washington, USA, one of the largest wheat producing counties in the country, developed a land evaluation and site assessment system for evaluating proposed conversions of agricultural land to heavy commercial uses. The system uses soil potential indices to determine a land evaluation score and a nine-factor site assessment system to weigh suitability for development. Details on each of these are provided along with results for four sample sites.Scientific Paper no. 7165, College of Argiculture and Home Economics Research Paper, Washington State University, Pullman, Washington, project no. 0010.     

Multiple mating affects offspring size in the opisthobranch Chelidonura sandrana

Offspring size can have pervasive effects throughout the life history stages of many marine invertebrates. Although maternal offspring investment is largely determined by the environmental conditions experienced by the mother, egg size might additionally vary in response to the number and quality of previous mating partners. Positive effects of mating multiply with several different males (polyandry) have been confirmed for a variety of species, whereas such investigations are lacking for marine invertebrates. Here we differentiated between the effects of ejaculate amount (repeatedly mated) and ejaculate diversity (polyandry) on maternal offspring investment in the simultaneously hermaphroditic sea slug Chelidonura sandrana. We found that focal “females” mated with four different “males” produced significantly larger egg capsules and larger veligers, while focal “females” mated four times with the same “male” suffered from reduced mid-term fecundity. We found no effect of veliger size on veliger survival. Our results show that female mating patterns are an important addition to understanding the variation in offspring size in internally fertilizing marine invertebrates.     

Arsenic in the food chain and assessment of population health risks in Bangladesh

The most consumed food samples of cereals (rice, maize and wheat), vegetables (lentil, brinjal, carrot, bean, potato, tomato, onion and chili), fruits (banana, mango and jackfruit), fish (taki, rui, pangas and tilapia), egg (chicken and duck), milk (cow) and meat (chicken, duck, beef and mutton) were collected from some markets of Bogra district northern part of Bangladesh to evaluate the levels of arsenic (As) and associated health risk to the adult’s and child inhabitants. Arsenic is a highly toxic element, and its presence in food composites is a matter of concern to the world scientists. Target hazard quotients (THQs) and target carcinogenic risk were calculated to evaluate the non-carcinogenic and carcinogenic health risk from ingested arsenic. The highest and the lowest mean concentrations of arsenic were noted in the Tilapia fish [(0.94 mg/kg, wet weight (ww)] and beef (0.012 mg/kg, ww). The daily intakes of arsenic via foodstuffs were 1.92 and 3.30 µg/kg-bw/day for rural adults and children and 1.69 and 3.04 µg/kg-bw/day for urban adults and children, respectively. The result shows the highest THQs of arsenic in cereals and vegetables for both the rural and urban inhabitants which exceed the safe limit (>1) indicating that cereals and vegetables are the main food items contributing to the potential health risk. The estimated target cancer risks from ingesting dietary arsenic all exceeded 10^?6, indicating increased risk of cancer for adults and children in the study area.     

Characterization of land-based sources of pollution in Jobos Bay,Puerto Rico: status of heavy metal concentration in bed sediment

As part of an assessment of land-based sources of pollution in Jobos Bay, Puerto Rico, sediment samples were collected at 43 sites to characterize concentrations of a suite of pollutants, including metals. Fifteen major and trace metals (Ag, Al, As, Cd, Cr, Cu, Fe, Hg, Mn Ni, Pb, Sb, Se, Sn, and Zn) were measured along with total organic carbon and grain size in surficial sediments. For most metals, maximum concentrations were seen in the eastern bay; however, values were still within concentration ranges found in other estuarine systems. In contrast, silver was higher in the western region. In general, metal distribution in the bay was positively correlated with grain size. Additionally, correlations between Al and other metals suggest natural sources for metals. The data presented here suggest that, although the Jobos Bay watershed contains both urban centers along with industrial and agricultural developments, anthropogenic inputs of metals may be negligible.     

Field-scale monitoring of the long-term impact and sustainability of drainage water reuse on the west side of California's San Joaquin Valley

Diminishing freshwater resources have brought attention to the reuse of degraded water as a water resource rather than a disposal problem. Drainage water from tile-drained, irrigated agricultural land is degraded water that is often in large supply, but the long-term impact and sustainability of its reuse on soil is unknown. Similarly, nothing is known of the ramifications of terminating drainage water reuse. The objective of this study is (i) to monitor the long-term impact on soil chemical properties and thereby the sustainability of drainage water reuse on a marginally productive, saline-sodic, 32.4 ha field located on the west side of California's productive San Joaquin Valley and (ii) to assess spatially what happens to soil when drainage water reuse is terminated. The monitoring and assessment were based on spatial chemical data for soil collected during 10 years of irrigation with drainage water followed by 2 years of no applied irrigation water (only rainfall). Geo-referenced measurements of apparent soil electrical conductivity (EC(a)) were used to direct the soil sampling design to characterize spatial variability of impacted soil properties. Chemical analyses of soil samples were used (i) to characterize the spatial variability of salinity, Na, B, and Mo, which were previously identified as critical to the yield and quality of Bermuda grass (Cynodon dactylon (l.) Pers.) grown for livestock consumption and (ii) to monitor their change during the 12 year study. Soil samples were taken at 0.3 m increments to a depth of 1.2 m at each of 40 sample sites on five occasions: August 1999, April 2002, November 2004, August 2009, and May 2011. Drainage water varying in salinity (1.8-16.3 dS m(-1)), SAR (5.2-52.4), Mo (80-400 μg L(-1)), and B (0.4-15.1 mg L(-1)) was applied from July 2000 to June 2009. Results indicate that salts, Na, Mo, and B were leached from the root zone causing a significant improvement in soil quality from 1999 to 2009. Salinity and SAR returned to original levels or higher in less than two years after termination of irrigation. Boron and Mo showed significant increases. Long-term sustainability of drainage water reuse was supported by the results, but once application of irrigation water was terminated, the field quickly returned to its original saline-sodic condition.     

Release of arsenic (As) and lead (Pb) from quicklime-sulfate stabilized/solidified soils under diffusion-controlled conditions

A quicklime-sulfate-based stabilization/ solidification (S/S) process for arsenic (As) and lead (Pb) immobilization was evaluated under “semi-dynamic” leaching conditions. In order to simulate aggressive leaching conditions the semi-dynamic leaching tests was modified by using 0.014 N of acetic solution instead of distilled water. Kaolinite-sand and montmorillonite-sand soil samples were artificially contaminated with As and Pb, compacted and cured for 28 days. The semi-dynamic leaching tests were then conducted for 90 days. The effectiveness of the S/S treatment was evaluated by assessing the cumulative release of As and Pb as well as by determining the diffusion coefficients (D _eff) and leachability indices (LX). The release of As and Pb was greatly reduced by quicklime-sulfate treatment as compared to untreated samples. Moreover, the quicklime-sulfate treatment was more effective than the quicklime-only treatment in reducing both As and Pb release. The controlling leaching mechanisms were determined using a diffusion theory model. Upon S/S treatment, As and Pb release was diffusion controlled. The LX of all the treated samples were greater than nine, suggesting that S/S treated samples were suitable for “controlled utilization”.     

Comparative analysis of regional water quality in Canada using the Water Quality Index

The Canadian Council of Ministers for the Environment (CCME) has developed a Water Quality Index (WQI) to simplify the reporting of complex water quality data. This science-based communication tool tests multi-variable water data against numeric water quality guidelines and/or objectives to produce a single unit-less number that represents overall water quality. The CCME WQI has been used to rate overall water quality in spatial and temporal comparisons of site(s). However, it has not been used in a comparative-analysis of exposure sites to reference sites downstream of point source discharges. This study evaluated the ability of the CCME WQI to differentiate water quality from metal mines across Canada at exposure sites from reference sites using two different types of numeric water quality objectives: (1) the water quality guidelines (WQG) for the protection of freshwater aquatic life and (2) water quality objectives determined using regional reference data termed Region-Specific Objectives (RSO). The application of WQG to the CCME WQI was found to be a good tool to assess absolute water quality as it relates to national water quality guidelines for the protection of aquatic life, but had more limited use when evaluating spatial changes in water quality downstream of point source discharges. The application of the RSO to the CCME WQI resulted in assessment of spatial changes in water quality downstream of point source discharges relative to upstream reference conditions.