Climate sensitivity,agricultural productivity and the social cost of carbon in FUND

Environmental Economics and Policy Studies - We explore the implications of recent empirical findings about CO2 fertilization and climate sensitivity on the social cost of carbon (SCC) in the FUND...     

Marine dredged sediments as new materials resource for road construction

Large volumes of sediments are dredged each year in Europe in order to maintain harbour activities. With the new European Union directives, harbour managers are encouraged to find environmentally sound solutions for these materials. This paper investigates the potential uses of Dunkirk marine dredged sediment as a new material resource for road building. The mineralogical composition of sediments is evaluated using X-ray diffraction and microscopy analysis. Since sediments contain a high amount of water, a dewatering treatment has been used. Different suitable mixtures, checking specific geotechnical criteria as required in French standards, are identified. The mixtures are then optimized for an economical reuse. The mechanical tests conducted on these mixtures are compaction, bearing capacity, compression and tensile tests. The experimental results show the feasibility of the beneficial use of Dunkirk marine dredged sand and sediments as a new material for the construction of foundation and base layers for roads. Further research is now needed to prove the resistance of this new material to various environmental impacts (e.g., frost damage).     

Proximal exposure of public schools and students to major roadways: a nationwide US survey

This study addresses the effect of urban planning and road development on the health risk of students attending schools near major roadways. The proximity of public schools and students was quantified to Interstate, US and state highways in nine large Metropolitan Statistical Areas (MSA) of the USA. In total among the surveyed schools and students, over 30% fell within 400 m of a major roadway and over 10% were within 100 m. For some MSAs almost half of the student population attended schools near (≤400m) major roadways, resulting in a potentially increased risk for asthma and other chronic respiratory problems, especially in schools representing the urban fringe locale. It was concluded that proximity of major roadways should be an important factor in considering sites for new schools and developing policies for reducing the exposure in existing schools. The findings provide an important reference point for coordinating future urban development, transportation and environmental policies.     

Effectiveness of electrocoagulation process in removing organic compounds from slaughterhouse wastewater using monopolar and bipolar electrolytic cells

Slaughterhouse wastewaters contain varied and high amounts of organic matter (e.g., proteins, blood, fat). In order to produce an effluent suitable for stream discharge, electrochemical techniques have been particularly explored at the laboratory pilot scale for organic compounds removal from poultry slaughterhouse (PS) effluent. Electrocoagulation (EC) process was tested using either mild steel or aluminium electrodes arranged in bipolar (BP) or monopolar configuration system. Results showed that the best performance was obtained using mild steel BP electrode system operated at a current intensity of 0.3A, through 60 or 90 min of treatment. Under these conditions, removals of 86+/-1% and 99+/-1% were measured for BOD and oil and grease, respectively, whereas soluble COD and total COD were removed by 50+/-4% and 82+/-2%, respectively. EC is also efficient for decolorization (red-color) and clarification of the PS effluent. Removals of 89+/-4% and 90+/-4% have been measured for total suspended solids and turbidity, respectively. Electrochemical coagulation operated under the optimal conditions involves a total cost of 0.71 USD $ per cubic meter of treated PS effluent. This cost includes energy and electrode consumptions, chemicals, and sludge disposal.     

Allocation plasticity and plant-metal partitioning: meta-analytical perspectives in phytoremediation

In this meta-analysis of plant growth and metal uptake parameters, we selected 19 studies of heavy metal (HM) phytoremediation to evaluate trends of allocation plasticity and plant-metal partitioning in roots relative to shoots. We calculated indexes of biomass allocation and metal distribution for numerous metals and plant species among four families of interest for phytoremediation purposes (e.g. Brassicaceae, Fabaceae, Poaceae, and Solanaceae). We determined that plants shift their biomass and distribute metals more to roots than shoots possibly to circumvent the challenges of increasing soil-HM conditions. Although this shift is viewed as a stress-avoidance strategy complementing intrinsic stress-tolerance, our findings indicate that plants express different levels of allocation plasticity and metal partitioning depending on their overall growth strategy and status as ‘fast-grower’ or ‘slow-grower’ species. Accordingly, we propose a conceptual model of allocation plasticity and plant-metal partitioning comparing ‘fast-grower’ and ‘slow-grower’ strategies and outlining applications for remediation practices.     

Engineered in situ bioremediation of a petroleum hydrocarbon-contaminated aquifer: assessment of mineralization based on alkalinity, inorganic carbon and stable carbon isotope balances

A concept is proposed to assess in situ petroleum hydrocarbon mineralization by combining data on oxidant consumption, production of reduced species, CH₄, alkalinity and dissolved inorganic carbon (DIC) with measurements of stable isotope ratios. The concept was applied to a diesel fuel contaminated aquifer in Menziken, Switzerland, which was treated by engineered in situ bioremediation. In the contaminated aquifer, added oxidants (O₂ and NO₃⁻) were consumed, elevated concentrations of Fe(II), Mn(II), CH₄, alkalinity and DIC were detected and the DIC was generally depleted in ¹³C compared to the background. The DIC production was larger than expected based on the consumption of dissolved oxidants and the production of reduced species. Stable carbon isotope balances revealed that the DIC production in the aquifer originated mainly from microbial petroleum hydrocarbon mineralization, and that geochemical reactions such as carbonate dissolution produced little DIC. This suggests that petroleum hydrocarbon mineralization can be underestimated if it is determined based on concentrations of dissolved oxidants and reduced species.     

A comparison of portable XRF and ICP-OES analysis for lead on air filter samples from a lead ore concentrator mill and a lead-acid battery recycler

Personal and area samples for airborne lead were taken at a lead mine concentrator mill, and at a lead-acid battery recycler. Lead is mined as its sulfidic ore, galena, which is often associated with zinc and silver. The ore typically is concentrated, and partially separated, on site by crushing and differential froth flotation of the ore minerals before being sent to a primary smelter. Besides lead, zinc and iron are also present in the airborne dusts, together with insignificant levels of copper and silver, and, in one area, manganese. The disposal of used lead-acid batteries presents environmental issues, and is also a waste of recoverable materials. Recycling operations allow for the recovery of lead, which can then be sold back to battery manufacturers to form a closed loop. At the recycling facility lead is the chief airborne metal, together with minor antimony and tin, but several other metals are generally present in much smaller quantities, including copper, chromium, manganese and cadmium. Samplers used in these studies included the closed-face 37 mm filter cassette (the current US standard method for lead sampling), the 37 mm GSP or "cone" sampler, the 25 mm Institute of Occupational Medicine (IOM) inhalable sampler, the 25 mm Button sampler, and the open-face 25 mm cassette. Mixed cellulose-ester filters were used in all samplers. The filters were analyzed after sampling for their content of the various metals, particularly lead, that could be analyzed by the specific portable X-ray fluorescence (XRF) analyzer under study, and then were extracted with acid and analyzed by inductively coupled plasma optical emission spectroscopy (ICP-OES). The 25 mm filters were analyzed using a single XRF reading, while three readings on different parts of the filter were taken from the 37 mm filters. For lead at the mine concentrate mill, all five samplers gave good correlations (r2 > 0.96) between the two analytical methods over the entire range of found lead mass, which encompassed the permissible exposure limit of 150 mg m(-3) enforced in the USA by the Mine Safety and Health Administration (MSHA). Linear regression on the results from most samplers gave almost 1 ratio 1 correlations without additional correction, indicating an absence of matrix effects from the presence of iron and zinc in the samples. An approximately 10% negative bias was found for the slope of the Button sampler regression, in line with other studies, but it did not significantly affect the accuracy as all XRF results from this sampler were within 20% of the corresponding ICP values. As in previous studies, the best results were obtained with the GSP sampler using the average of three readings, with all XRF results within 20% of the corresponding ICP values and a slope close to 1 (0.99). Greater than 95% of XRF results were within 20% of the corresponding ICP values for the closed-face 37 mm cassette using the OSHA algorithm, and the IOM sampler using a sample area of 3.46 cm2. As in previous studies, considerable material was found on the interior walls of all samplers that possess an internal surface for deposition, at approximately the same proportion for all samplers. At the lead-acid battery recycler all five samplers in their optimal configurations gave good correlations (r2 > 0.92) between the two analytical methods over the entire range of found lead mass, which included the permissible exposure limit enforced in the USA by the Occupational Safety and Health Administration (OSHA). Linear regression on the results from most samplers gave almost 1 ratio 1 correlations (except for the Button sampler), indicating an absence of matrix effects from the presence of the smaller quantities of the other metals in the samples. A negative bias was found for the slope of the button sampler regression, in line with other studies. Even though very high concentrations of lead were encountered (up to almost 6 mg m(-3)) no saturation of the detector was observed. Most samplers performed well, with >90% of XRF results within +/- 25% of the corresponding ICP results for the optimum configurations. The OSHA algorithm for the CFC worked best without including the back-up pad with the filter.     

EFFECTIVENESS OF BIOPHYSICAL CRITERIA IN THE HIERARCHICAL CLASSIFICATION OF DRMNAGE BASINS1

ABSTRACT: A subwatershed base map of 84 hydrologic subregions within the Columbia River Basin (approximately 58,361,000 ha) was developed following hierarchical principles of ecological unit mapping. Our primary objectives were to inspect the relations between direct and indirect biophysical variables in the prediction of valley bottom and stream type patterns, and to identify hydrologic subregions (based on these results) that had similar aquatic patterns for which consistent management practices could be applied. Realization of these objectives required: (1) stratified subsampling of valley bottom and stream type composition within selected sub‐watersheds, (2) identification of direct and indirect biophysical variables that were mappable across the basin and that exerted primary control on the distribution of sampled aquatic patterns, and (3) development of hydrologic subregion maps based on the primary biophysical variables identified. Canonical correspondence analysis indicated that a core set of 15 direct variables (e.g., average watershed slope, drainage density, ten‐year peak flow) and 19 indirect variables (i.e., nine subsection groups, four lithology groups, and six potential vegetation settings) accounted for 31 and 30 percent (respectively) of valley bottom/stream type composition variability and 84 and 80 percent (respectively) of valley bottom/stream type environmental variability within subsamples. The 19 indirect biophysical variables identified were used to produce an ecological unit classification of 7,462 subwatersheds within the basin by a hierarchical agglomerative clustering technique (i.e., hydrologic subregions were identified). Discriminant analysis indicated that 13 direct biophysical variables could correctly assign 80 percent of the subwatersheds to their indirect biophysical classification, thus demonstrating the strong relation that exists between indirect biophysical based classifications (ecological units) and the direct biophysical variables that determine finer‐level aquatic patterns. Our hydrologic subregion classifications were also effective in explaining observed differences in management hazard ratings across all subwatersheds of the basin. Results of this research indicate that ecological units can be effectively used to produce watershed classifications that integrate the effects of direct biophysical variables on finer‐level aquatic patterns, and predict opportunities and limitations for management.     

Volatile organic compounds concentrations in residential indoor and outdoor and its personal exposure in Korea

To date, personal volatile organic compounds (VOCs) exposure and residential indoor and outdoor VOCs levels have not been characterized in Korea. In this study, residential indoor and outdoor VOCs concentrations were measured and compared simultaneously with the personal exposure for each of 30 participants in a medium city, Asan, and in a metropolitan city, Seoul. Factors that influence personal VOCs exposures were assessed in relation to house characteristics and time activity information. All VOC concentrations were measured using passive samplers during a 24-h period and analyzed using GC-MS. Ten target VOCs were benzene, trichloroethylene, toluene, o-xylene, p-xylene, ethylbenzene, MIBK, n-octane, styrene, and 1,2-dichlorobenzene. Residential indoor and outdoor VOCs concentrations measured in Seoul were significantly higher than those in Asan. Indoor/outdoor (I/O) ratios for all target compounds ranged from 0.94 to 1.51 and I/O ratios of Asan were a little higher than those of Seoul. Results indicate that time activity information can be used to predict personal exposures, although such predictions will result in an over estimation compared to measured exposures. Factors which influence the indoor VOCs level and its personal exposure in relation to house characteristics included house age, indoor smoking, and house type.