The Spatiotemporal Pattern of Fires in Northern Taiga Larch Forests of Central Siberia

The periodicity of fires in larch forests of Evenkia and their relationship with landscape elements have been studied. Cross-sections with “burns” in them caused by past fires have been analyzed in 72 test plots; the fire chronology encompassed the period from the 15th to the 20th century. The between-fire intervals (BFIs) have been calculated by two methods: (I) on the basis of burns alone and (II) on the basis of burns and the start of growth of the new generation of larch after the earliest fire. The BFI depends on local orographic features; it is 86 ± 11 (105 ± 12), 61 ± 8 (73 ± 8), 139 ± 17 (138 ± 18), and 68 ± 14 (70 ± 13) years for northeastern slopes, southwestern slopes, bogs, and flatlands, respectively. The mean BFIs calculated by methods I and II are 82 ± 7 and 95 ± 7 years, respectively. The permafrost horizon rises at a mean rate of 0.3 cm per year after a forest fire. It has been shown that the number of fires regularly peaks at periods of 36 and 82 years. There is also a temporal trend in fire frequency: the mean BFI was approximately 100 years in the 19th century and 65 years in the 20th century.     

Using fuzzy set theory to address the uncertainty of susceptibility to drought

This paper presents the technical aspects of a new methodology for assessing the susceptibility of society to drought. The methodology consists of a combination of inference modelling and fuzzy logic applications. Four steps are followed: (1) model input variables are selected—these variables reflect the main factors influencing susceptibility in a social group, population or region, (2) fuzzification—the uncertainties of the input variables are made explicit by representing them as ‘fuzzy membership functions’, (3) inference modelling—the input variables are used to construct a model made up of linguistic rules, and (4) defuzzification—results from the model in linguistic form are translated into numerical form, also through the use of fuzzy membership functions. The disadvantages and advantages of this methodology became apparent when it was applied to the assessment of susceptibility from three disciplinary perspectives: Disadvantages include the difficulty in validating results and the subjectivity involved with specifying fuzzy membership functions and the rules of the inference model. Advantages of the methodology are its transparency, because all model assumptions have to be made explicit in the form of inference rules; its flexibility, in that informal and expert knowledge can be incorporated through ‘fuzzy membership functions’ and through the rules in the inference model; and its versatility, since numerical data can be converted to linguistic statements and vice versa through the procedures of ‘fuzzification’ and ‘defuzzification’.     

Biodegradation of crosslinked acrylic polymers by a white-rot fungus

Two synthetic superabsorbent crosslinked acrylic polymers were mineralized by the white-rot fungusPhanerochaete chrysosporium. The amount of polymer converted to CO₂ increased as the amount of polymer added to the cultures increased. In the presence of sufficiently large amounts of the superabsorbents, such that all of the culture fluid was absorbed and a gelatinous matrix was formed, the fungus still grew and mineralization was observed. Neither the polymers, nor their degradation products were toxic to the fungus. While the rates of mineralization were low, all of the polymers incubated in the liquid fungal cultures were completely depolymerized to water soluble products within 15–18 days. The depolymerization of the polymers was observed only in nitrogen limited cultures of the fungus which secrete the lignin degradation system, however, the water soluble products of depolymerization were mineralized in both nutrient limited and sufficient cultures of the fungus. The rate of mineralization of the depolymerized metabolites was more than two times greater in nutrient sufficient cultures. Following longer incubation periods, most (> 80 %) of the radioactivity was recovered in the fungal mycelial mat suggesting that carbon of the polymer had been converted to fungal metabolites.     

Rapid growth of clones of the red alga Chondrus crispus: applications in assays of toxic substances and in physiological studies

Growth rates of excised apical segments from three Chondrus crispus Stackhouse clones were rapid, reproducible and easily measured using simple equipment. Clonal segments exhibited a high degree of phenotypic stability, with coefficients of variation in growth rates being typically less than 5%. Sensitivity of the assay was demonstrated using 24-h pulses of the toxicants Cu²⁺ (10 to 150 ppb) and the molluscicide Bayluscide (100 to 500 ppb). As a further demonstration of applicability of this assay system, growth rates were measured over two consecutive 24-h photoperiods using a normally pigmented red gametophytic clone and a green colored mutant derived from it. Growth rates were highest in the first hours of the light phase for both clones, with growth of the green mutant being consistently inferior to that of the normally pigmented one. Significant changes were measured with intervals as short as 4 h using only five apical segments for each treatment. The C. crispus assay described is sensitive, relatively rapid, and statistically robust when applied to toxicant testing in seawater and to physiological studies.     

Stability of a Coal Waste Artificial Reef

The feasibility of using U.K. coal-fired power station waste materials for artificial reef production is being examined. in June, 1989, an experimental artificial reef was constructed in Poole Bay, off the central south coast of the U.K., using three different mixtures of pulverised fuel ash (PFA), flue gas desulphurisation (FGD) gypsum and slurry, stabilized with cement and formed into blocks. Fifty tonnes of 40 × 20 × 20 cm blocks were formed into eight conical reef units replicating three different PFA/gypsum mixtures and one concrete control. the reef structure is 10m below chart datum on a flat sandy sea-bed.

Combustion of coal concentrates the heavy metal content in the resultant ash. the purpose of stabilization of the ash as blocks is twofold: to immobilize heavy metals (or other components) and to provide hard substratum for the attachment of organisms. to examine the effectiveness of this stabilization and hence the environmental compatibility of the block materials, heavy metal (Cd, Cr, Cu, Pb, Mn, Ni, Zn) content of the blocks has been monitored routinely over two years, to determine leaching rates. Sectional profiles indicate partial replacement of calcium content by magnesium. Associated with this there has also been some redistribution of heavy metals. Only in the case of cadmium has there been a detectable loss from the surface of blocks. Chromium and manganese concentrations appear to have increased. the metal content of the reef epibiota (including ascidians, Ascidia mentula; hydroids, Halecium spp.; bryozoans, Bugula spp. and red algae) growing on the ash blocks has been compared to that of epibiota attached to the concrete controls and surrounding sea-bed. to date no evidence of excess bioaccumulation of metals has been detected.

The physical integrity of the ash reef blocks has been maintained. There is evidence that the blocks are increasing in compressive strength.

An indication of the fishery enhancement potential of the experimental structure is given by the presence of eight commercially fished species (crustaceans and molluscs) including lobsters (Homarus gammarus).