Voltammetric analysis of metallothioneins and copper (II) in fish for water biomonitoring studies

An major research area in environmental chemistry is the development of methods for the analysis of biomarkers. Metallothioneins are used as biomarkers in studies of heavy metals exposure in water, because metallothioneins are synthesized and accumulated when organisms are exposed to toxic concentrations of pollutants. In this work, simple and sensitive voltammetric methods were developed for metallothionein and copper (II) determinations in fish liver Lepomis gibbosus. Both analytical methodologies were optimized and applied to samples extracted from individuals previously submitted to sub-lethal toxicological trials with copper sulphate (CuSO₄) and cadmium chloride (CdCl₂). The obtained results showed that both methods are very precise, sensitive, and involve simple sample preparation processes. Moreover, metallothioneins showed better correlation with the toxic exposure than Cu²⁺. To the best of our knowledge, this is the first time that hepatic metallothioneins and Cu²⁺ contents are voltammetrically determined in order to be compared in their function as heavy metal biological indicators.     

Loft features reveal the functioning of the young pigeon’s navigational system

It is thought that young homing pigeons are able to use information acquired en route for their initial homeward orientation. However, the cues involved and mechanisms utilised are under discussion. Blocking light-dependent route-specific information during the first leg of an outward journey detour, together with analysis of pigeons that were raised under different loft conditions, allowed us to correctly evaluate the functioning of this mechanism and, more generally, the navigational map of birds. Pigeons from the same stock were raised and kept in two different lofts. The birds in the experimental groups were transported to the release sites via detours, and light-dependent information was denied during the first half of the outward journey (no compass information was available). Control birds were transported by the most direct route and had access to all available information. In general, the results showed that the low-loft birds preferred to use magnetic compass cues, whereas the high-loft birds preferred to use navigational map cues to collect information of the first part of the outward journey. The impairments observed in the homing performances of the experimental groups highlight the reliability of information collected inside the map area. Relevant to an understanding of the route-reversal mechanism was the evidence that this mechanism is able to function in the absence of compass information (birds raised in a wind-exposed loft show a detour effect). In systems where directional information could be provided by multiple sources, processing and extracting accurate course trajectories through a common mechanism may prove more efficient and reliable.     

Accessibility and trust: the two dimensions of consumers’ perception on sustainable purchase intention

The aim of this article is to shed new light on which dimensions compose sustainable purchase intention (SPI) with the purpose of understanding what moves consumers to a potentially more sustainable behaviour. Even though several studies have researched which factors influence consumer’s intention to buy in a more sustainable way, no comparable research in consumer behaviour was found studying these dimensions in a triple bottom line perspective (profit, people, and planet) that could also provide future corporate and academic applications. Therefore, this article proposes a new construct – Consumers’ Perception on SPI, defined using the C-OAR-SE procedure and measured using exploratory and confirmatory factor analysis using two different samples. In-depth interviews and online survey to actual consumers of sustainable products were undertaken in partnership with a sustainable project using its database, guaranteeing that real consumers’ perceptions were gathered for this study. The construct is proposed with two dimensions (measured by nine items): Accessibility (including facets such as product lower pricing, availability in stores, and being sold within a convenient proximity to home) and Trust (including consumers needs such as: to get to know and trust products through understanding the labels; to have had good experiences in the past or simply to have new trial opportunities). Theoretical and practical implications of the findings are also discussed.     

A multi-scale approach to modelling spatial and dynamic ecological patterns for reservoir's water quality management

With growing levels of urbanization and agriculture throughout the world, it is increasingly important that both research and management efforts take into account the effects of this widespread landscape alteration and its consequences for natural systems. Freshwater ecosystems, namely reservoirs, are particularly sensitive to land use changes. In this context, modelling can be very useful, for decision support, as an investigative tool to forecast the outcome of various scenarios, to guide current management in order to meet future targets and to develop integrated frameworks for management accordingly to the Water Framework Directive (WFD). The present paper examined the applicability of a holistic Stochastic-Dynamic Methodology (StDM), coupled with a Cellular Automata (CA) model, in capturing how expected changes at land use level will alter the ecological status of lentic ecosystems, namely at physicochemical and biological levels. The methodology was applied to Portuguese reservoirs located in the Douro's basin and illustrated with a series of stochastic-dynamic and spatial outputs taking into account expected scenarios regarding land use changes. Overall, the simulation results are encouraging since they seem to demonstrate the tool reliability in capturing the stochastic environmental dynamics of the selected metrics facing spatial explicit scenarios. The ultimate goal was to couple monitoring assessment and the described modelling techniques to ease management and decision making regarding the practical implementation of the WFD, both at the scale of the reservoir body and at the scale of the respective river watershed dynamics.     

Exploring community assembly through an individual-based model for trophic interactions

Traditionally, the dynamics of community assembly has been analyzed by means of deterministic models of differential equations. Despite the theoretical advances provided by such models, they are restricted to questions about community-wide features. The individual-based modeling offers an opportunity to link bionomic features to patterns at the community scale, allowing us to understand how trait-based assembly rules can arise by dynamical processes. The present paper introduces an individual-based model of community assembly, and discusses some of the major advantages and drawbacks of this approach. The model was framed to deal with predation among size-structured populations, incorporating allometric constraints to energetic requirements, movement, life-history features and interaction relationships among individuals. A protocol of assembly procedure is proposed, in which a period of intense species introductions is followed by a period without introductions. The resultant communities did not present any pattern of trait over-dispersion, meaning that the multivariate distances of bionomic features among co-occurring species were neither larger nor more regular than expected in a random collection of species. It suggests a weak influence of interspecific interactions in the model environment and individualistic rules of coexistence, driven mainly by the spatial structure. This highlights that trait over-dispersion and resource partitioning should not be considered a necessary condition for coexistence, even in communities entirely structured by internal processes like predation and competition.     

Preparation of CuO/SiO<Subscript>2</Subscript> and photocatalytic activity by degradation of methylene blue

A photocatalyst based on CuO/SiO₂ was prepared, and evaluated for the degradation of methylene blue in aqueous medium. The photocatalyst was obtained by calcination method of copper salt, in the presence of silica. The characterization by XRD, FTIR, and TPR techniques confirmed the formation of CuO as active phase. SEM studies showed CuO deposited on the surface of SiO₂. By ESI-MS, it was demonstrated that the degradation of methylene blue occurs through successive hydroxylations. Photodegradation assays showed that CuO/SiO₂ was efficient for degradation, and that the material worked better in the presence of UV light.     

A roadmap for the conservation of freshwater mussels in Europe

Europe has a long history of human pressure on freshwater ecosystems. As pressure continues to grow and new threats emerge, there is an urgent need for conservation of freshwater biodiversity and its ecosystem services. However, whilst some taxonomic groups, mainly vertebrates, have received a disproportionate amount of attention and funds, other groups remain largely off the public and scientific radar. Freshwater mussels (Bivalvia, Unionida) are an alarming example of this conservation bias and here we point out six conceptual areas that need immediate and long-term attention: knowledge, threats, socioeconomics, conservation, governance and education. The proposed roadmap aims to advance research, policy and education by identifying the most pressing priorities for the short- and long-term conservation of freshwater mussels across Europe.     

Dioxin- and POP-contaminated sites—contemporary and future relevance and challenges

BACKGROUND, AIM AND SCOPE: Once they have been generated, polychlorinated dibenzo-p-dioxins (PCDDs) and dibenzofurans (PCDFs) and other persistent organic pollutants (POPs) can persist in soils and sediments and in waste repositories for periods extending from decades to centuries. In 1994, the US EPA concluded that contaminated sites and other reservoirs are likely to become the major source of contemporary pollution problems with these substances. With this in mind, this article is the first in a new series in ESPR under the title 'Case Studies on Dioxin and POP Contaminated Sites--Contemporary and Future Relevance and Challenges', which will address this important issue. The series will document various experiences from sites contaminated with PCDD/F and other POPs. This article provides an overview of the content of the articles comprising the series. In addition, it provides a review of the subject in its own right and identifies the key issues arising from dioxin/POP-contaminated sites. Additionally, it highlights the important conclusions that can be drawn from these examples. The key aim of this article and of the series as a whole is to provide a comprehensive overview of the types of PCDD/F contaminated sites that exist as a result of historical activities. It details the various processes whereby these sites became contaminated and attempts to evaluate their contemporary relevance as sources of PCDD/Fs and other POPs. It also details the various strategies used to assess these historical legacies of contamination and the concepts developed, or which are under development, to effect their remediation. MAIN FEATURES: Special sessions on 'Contaminated sites--Cases, remediation, risk and policy' were held at the DIOXIN conferences in 2006 and 2007, and this theme will be continued at DIOXIN 2008 to be held in Birmingham. Selected cases from the approximately 70 contributions made to these sessions, together with some additional invited case studies are outlined together with the key issues they raise. By evaluating these cases and adding details of experiences published in the current literature, an overview will be given of the different features and challenges of dioxin and POP-contaminated sites. RESULTS: This article provides a systematic categorisation of types of PCDD/F and POP-contaminated sites. These are categorised according to the chemical or manufacturing process, which generated the PCDD/Fs or POPs and also includes the use and disposal aspects of the product life cycle in question. The highest historical PCDD/F and dioxin-like polychlorinated biphenyl (PCB) contamination burdens have arisen as a result of the production of chlorine and of chlorinated organic chemicals. In particular, the production of chlorinated pesticides, PCBs and the related contaminated waste streams are identified being responsible for historical releases of toxic equivalents (TEQs) at a scale of many tonnes. Along with such releases, major PCDD/F contaminated sites have been created through the application or improper disposal of contaminated pesticides, PCBs and other organochlorine chemicals, as well through the recycling of wastes and their attempted destruction. In some extreme examples, PCDD/F contaminated sites have also resulted from thermal processes such as waste incinerators, secondary metal industries or from the recycling or deposition of specific waste (e.g. electronic waste or car shredder wastes), which often contain chlorinated or brominated organic chemicals. The examples of PCDD/F and dioxin-like PCB contamination of fish in European rivers or the impact of contaminated sites upon fishing grounds and upon other food resources demonstrate the relevance of these historical problems to current and future human generations. Many of the recent food contamination problems that have emerged in Europe and elsewhere demonstrate how PCDD/F and dioxin like PCBs from historical sources can directly contaminate human and animal feedstuffs and indeed highlight their considerable contemporary relevance in this respect. Accordingly, some key experiences and lessons learnt regarding the production, use, disposal and remediation of POPs from the contaminated sites are summarised. DISCUSSION: An important criterion for evaluating the significance and risks of PCDD/Fs and other POPs at contaminated sites is their present or future potential for mobility. This, in turn, determines to a large degree their propensity for off-site transport and environmental accessibility. The detailed evaluation of contaminated site cases reveals different site-specific factors, which influence the varied pathways through which poor water-soluble POPs can be mobilised. Co-contaminants with greater water solubility are also typically present at such sites. Hence, pumping of groundwater (pump and treat) is often required in addition to attempting to physically secure a site. At an increasing number of contaminated sites, securing measures are failing after relatively short time spans compared to the time horizon, which applies to persistent organic pollutant contamination. Due to the immense costs and challenges associated with remediation of contaminated sites 'monitored natural attenuation' is increasingly gaining purchase as a conceptual remediation approach. However, these concepts may well prove limited in their practical application to contaminated sites containing persistent organic pollutants and other key pollutants like heavy metals. CONCLUSIONS: It is inevitable, therefore, that dioxin/POP-contaminated sites will remain of contemporary and future relevance. They will continue to represent an environmental issue for future generations to address. The securing and/or remediation of dioxin/POP-contaminated sites is very costly, generally in the order of tens or hundreds of millions of dollars. Secured landfills and secured production sites need to be considered as constructions not made for 'eternity' but built for a finite time scale. Accordingly, they will need to be controlled, supervised and potentially repaired/renewed. Furthermore, the leachates and groundwater impacted by these sites will require ongoing monitoring and potential further remediation. These activities result in high maintenance costs, which are accrued for decades or centuries and should, therefore, be compared to the fully sustainable option of complete remediation. The contaminated site case studies highlight that, while extensive policies and established funds for remediation exist in most of the industrialised western countries, even these relatively well-regulated and wealthy countries face significant challenges in the implementation of a remediation strategy. This highlights the fact that ultimately only the prevention of contaminated sites represents a sustainable solution for the future and that the Polluter Pays Principle needs to be applied in a comprehensive way to current problems and those which may emerge in the future. RECOMMENDATIONS AND PERSPECTIVES: With the continuing shift of industrial activities in developing and transition economies, which often have poor regulation (and weak self-regulation of industries), additional global challenges regarding POPs and other contaminated sites may be expected. In this respect, a comprehensive application of the "polluter pays principle" in these countries will also be a key to facilitate the clean-up of contaminated areas and the prevention of future contaminated sites. The threats and challenges of contaminated sites and the high costs of securing/remediating the problems highlight the need for a comprehensive approach based upon integrated pollution prevention and control. If applied to all polluting (and potentially polluting) industrial sectors around the globe, such an approach will prove to be both the cheapest and most sustainable way to underpin the development of industries in developing and transition economies.     

Monitoring the transport of biomass burning emissions in South America

The atmospheric transport of biomass burning emissions in the South American and African continents is being monitored annually using a numerical simulation of air mass motions; we use a tracer transport capability developed within RAMS (Regional Atmospheric Modeling System) coupled to an emission model. Mass conservation equations are solved for carbon monoxide (CO) and particulate material (PM2.5). Source emissions of trace gases and particles associated with biomass burning activities in tropical forest, savanna and pasture have been parameterized and introduced into the model. The sources are distributed spatially and temporally and assimilated daily using the biomass burning locations detected by remote sensing. Advection effects (at grid scale) and turbulent transport (at sub-grid scale) are provided by the RAMS parameterizations. A sub-grid transport parameterization associated with moist deep and shallow convection, not explicitly resolved by the model due to its low spatial resolution, has also been introduced. Sinks associated with the process of wet and dry removal of aerosol particles and chemical transformation of gases are parameterized and introduced in the mass conservation equation. An operational system has been implemented which produces daily 48-h numerical simulations (including 24-h forecasts) of CO and PM2.5, in addition to traditional meteorological fields. The good prediction skills of the model are demonstrated by comparisons with time series of PM2.5 measured at the surface.     

Behavioral ecology of the neotropical termite-hunting ant Pachycondyla (= Termitopone) marginata: colony founding,group-raiding and migratory patterns

This study provides the first detailed field account of colony founding, group-raiding and migratory habits in the neotropical termite-hunting ant rPachycondyla marginata, in a semi-deciduous forest in south-east Brazil. New colonies can originate by haplometrosis, pleometrosis, or colony fission. Incipient colonies with multiple foundresses persisted longer in the field, and most excavated nests contained more than one dealated female. A total of 202 group raids by P. marginata were registered, and in all cases the raided termite species was Neocapritermes opacus. Nearly 20% of the workers within a colony engage with raiding activity. Colonies of P. marginata hunt for termites approximately every 2–3 weeks, and group-raids may last for more than 24 h. Target termite nests are up to 38 m from the ant colony, and occasionally two nests are simultaneously raided by one ant colony. Raiding ants carry 1 or 2 paralysed prey, and nearly 1600 termites can be captured during a 9-h raid. Migration by P. marginata colonies lasted over 2 days and covered distances of 2-97 m (n = 48). Average residence time at a given location was 150 days. Three basic migratory patterns were noted: colony fission (only part of the colony moves), long-distance migrations, and short-distance migrations. Both raiding and migratory activities appeared to be strongly affected by seasonal factors. The group raiding and migratory patterns of P. marginata are compared with other ant taxa with similar habits. It is concluded that P. marginata presents a rudimentary form of the so-called army ant behavior, which is highly developed in the subfamilies Dorylinae and Ecitoninae. The extremely specialized diet of P. marginata and the associated high costs of migration are features likely to prevent it from evolving a full army ant life pattern.