Bioremediation assessment of diesel–biodiesel-contaminated soil using an alternative bioaugmentation strategy

This study investigated the effectiveness of successive bioaugmentation, conventional bioaugmentation, and biostimulation of biodegradation of B10 in soil. In addition, the structure of the soil microbial community was assessed by polymerase chain reaction-denaturing gradient gel electrophoresis. The consortium was inoculated on the initial and the 11th day of incubation for successive bioaugmentation and only on the initial day for bioaugmentation and conventional bioaugmentation. The experiment was conducted for 32 days. The microbial consortium was identified based on sequencing of 16S rRNA gene and consisted as Pseudomonas aeruginosa, Achromobacter xylosoxidans, and Ochrobactrum intermedium. Nutrient introduction (biostimulation) promoted a positive effect on microbial populations. The results indicate that the edaphic community structure and dynamics were different according to the treatments employed. CO₂ evolution demonstrated no significant difference in soil microbial activity between biostimulation and bioaugmentation treatments. The total petroleum hydrocarbon (TPH) analysis indicated a biodegradation level of 35.7 and 32.2 % for the biostimulation and successive bioaugmentation treatments, respectively. Successive bioaugmentation displayed positive effects on biodegradation, with a substantial reduction in TPH levels.     

In Situ Monitoring of the Mutagenic Effects of the Gaseous Emissions of a Solid Waste Incinerator in Metropolitan São Paulo,Brazil, Using the Tradescantia Stamen-Hair Assay

ABSTRACT

The present work was designed to determine the potential genotoxicity at the vicinity of a solid waste incinerator in the metropolitan area of Sâo Paulo, using the Tradescantia stamen-hair bioassay. Experiments were carried out between December 1998 and April 1999 in four regions (40 pots of plants per site) selected on the basis of their pollution levels predicted by theoretical modeling of the dispersion of the incinerator's plume. The exposure sites were defined as follows: highest level (incinerator); a high level (museum) located 1.5 km from the emission point; a moderate level (school, at a distance of 3.5 km from the incinerator); and a control (at Jaguariuna countryside). The difference in genotoxicity among the groups was statistically significant (p < 0.001). The frequency of mutations observed in the countryside was significantly lower [2.25 ± 1.55, mean ± SD (standard deviation)] than that of the sites close to the incinerator. The frequency of mutations measured at the school (3.70 ± 1.36) was significantly lower than that measured at both the museum (4.89 ± 1.12) and the incinerator (5.69 ± 1.34). In conclusion, we found a positive correlation between the spatial distribution of the emissions of the incinerator located in an urban area and the mutagenic events measured by the Tradescantia stamen-hair assay. The in situ approach employed in this study was simple, efficient, and of low cost. No air or chemical extraction of pollutants was necessary for genotoxicity testing as required by other assays.     

Investigation of the inorganic and organic phosphorus forms in animal manure

The most viable way to beneficially use animal manure on most farms is land application. Over the past few decades, repeated manure application has shown adverse effects on environmental quality due to phosphorus (P) runoff with rainwater, leading to eutrophication of aquatic ecosystems. Improved understanding of manure P chemistry may reduce this risk. In this research, 42 manure samples from seven animal species (beef and dairy cattle, swine, chicken, turkey, dairy goat, horse, and sheep) were sequentially fractionated with water, NaHCO?, NaOH, and HCl. Inorganic (P(i)), organic (P(o)), enzymatic hydrolyzable (P(e); monoester-, DNA-, and phytate-like P), and nonhydrolyzable P were measured in each fraction. Total dry ash P (P(t)) was measured in all manures. Total fractionated P (P(ft)) and total P(i) (P(it)) showed a strong linear relationship with P(t). However, the ratios between P(ft)/P(t) and P(it)/P(t) varied from 59 to 117% and from 28 to 96%, respectively. Water and NaHCO? extracted most of the P(i) in manure from ruminant+horse, whereas in nonruminant species a large fraction of manure P was extracted in the HCl fraction. Manure P(e) summed over all fractions (P(et)) accounted for 41 to 69% of total P(0) and 4 to 29% of P(t). The hydrolyzable pool in the majority of the manures was dominated by phytate- and DNA-like P in water, monoester- and DNA-like P in NaHCO?, and monoester- and phytate-like P in NaOH and HCl fractions. In conclusion, if one assumes that the P(et) and P(it) from the fractionation can become bioavailable, then from 34 to 100% of P(t) in animal manure would be bioavailable. This suggests the need for frequent monitoring of manure P for better manure management practices.     

Isolation of mesotrione-degrading bacteria from aquatic environments in Brazil

Mesotrione is a benzoylcyclohexane-1,3-dione herbicide that inhibits 4-hydroxyphenyl pyruvate dioxygenase in target plants. Although it has been used since 2000, only a limited number of degrading microorganisms have been reported. Mesotrione-degrading bacteria were selected among strains isolated from Brazilian aquatic environments, located near corn fields treated with this herbicide. Pantoea ananatis was found to rapidly and completely degrade mesotrione. Mesotrione did not serve as a sole C, N, or S source for growth of P. ananatis, and mesotrione catabolism required glucose supplementation to minimal media. LC-MS/MS analyses indicated that mesotrione degradation produced intermediates other than 2-amino-4-methylsulfonyl benzoic acid or 4-methylsulfonyl-2-nitrobenzoic acid, two metabolites previously identified in a mesotrione-degrading Bacillus strain. Since P. ananatis rapidly degraded mesotrione, this strain might be useful for bioremediation purposes.     

Properties of alkali-activated systems with stone powder sludge

This article investigates the effects of stone powder sludge on the microstructure and strength development of alkali-activated fly ash and blast furnace slag mixes. Stone powder sludge produced from a crushed aggregate factory was used to replace fly ash and granulated blast furnace slag at replacement ratios of 0%, 10%, 20%, and 30% by mass. The unit weight and compressive strength of the samples were measured, and scanning electron microscopy/energy dispersive spectroscopy and X-ray diffraction (XRD) analyses were performed. The test results indicated that the compressive strength of alkali-activated blast furnace slag mixes using stone powder sludge was higher than that of the alkali-activated blast furnace slag control mix, but the compressive strength of alkali-activated fly ash mixes decreased with increasing replacement ratio of stone powder sludge. Microscopy results indicated that for alkaliactivated blast furnace slag samples, broken surfaces were more evident than for the alkali-activated fly ash samples. For all XRD diagrams, broad and diffuse peaks were observed around 2θ = 35° (d = 2.96–3.03 Å), implying amorphous or short-ordering structure phases.     

PM2.5 and PM10: The influence of sugarcane burning on potential cancer risk

In Brazil, sugarcane fields are often burned to facilitate manual harvesting, and this burning causes environmental pollution from the large amounts of soot released into the atmosphere. This material contains numerous organic compounds such as PAHs. In this study, the concentrations of PAHs in two particulate-matter fractions (PM_2.5 and PM₁₀) in the city of Araraquara (SE Brazil, with around 200,000 inhabitants and surrounded by sugarcane plantations) were determined during the sugarcane harvest (HV) and non-harvest (NHV) seasons in 2008 and 2009. The sampling strategy included four campaigns, with 60 samples in the NHV season and 220 samples in the HV season. The PM_2.5 and PM₁₀ fractions were collected using a dichotomous sampler (10 L min^?1, 24 h) with Teflon? filters. The filter sets were extracted (ultrasonic bath with hexane/acetone (1:1 v/v)) and analyzed by HPLC/Fluorescence. The median concentration for total PAHs (PM_2.5 in 2009) was 0.99 ng m^?3 (NHV) and 3.3 ng m^?3 (HV). In the HV season, the total concentration of carcinogenic PAHs (benz(a)anthracene, benzo(b)fluoranthene, benzo(k)fluoranthene, and benzo(a)pyrene) was 5 times higher than in the NHV season. B(a)P median concentrations were 0.017 ng m^?3 and 0.12 ng m^?3 for the NHV and HV seasons, respectively. The potential cancer risk associated with exposure through inhalation of these compounds was estimated based on the benzo[a]pyrene toxic equivalence (BaP_eq), where the overall toxicity of a PAH mixture is defined by the concentration of each compound multiplied by its relative toxic equivalence factor (TEF). BaP_eq median (2008 and 2009 years) ranged between 0.65 and 1.0 ng m^?3 and 1.2–1.4 ng m^?3 for the NHV and HV seasons, respectively. Considering that the maximum permissible BaP_eq in ambient air is 1 ng m^?3, related to the increased carcinogenic risk, our data suggest that the level of human exposure to PAHs in cities surrounded by sugarcane crops where the burning process is used is cause for concern.     

Landfill mining from a deposit of the chlorine/organochlorine industry as source of dioxin contamination of animal feed and assessment of the responsible processes

In 1997, the Polychlorinated dibenzo-para-dioxin (PCDD)/Polychlorinated dibenzofuran (PCDF) concentrations in dairy products in Germany and other European countries increased. The PCDD/PCDF source was contaminated lime used in Brazilian citrus pulp pellets. The contaminated lime was mined from an industrial dump site. However, the detailed origin of the PCDD/PCDFs in the lime was not revealed. This paper investigates the contamination origin and describes the link between lime milk from the dumpsite of a chlorine/organochlorine industry and the contaminated lime. The contaminated lime stem from mining at the corporate landfill of Solvay Indupa in Sao Paulo. The landfill was used for 40 years for deposition of production residues and closed in 1996. The factory operated/operates at least two processes with potentially high PCDD/PCDFs releases namely the oxychlorination process for production of ethylene dichloride (EDC) and the chlor-alkali process. The main landfilled waste was lime milk (1.4 million tons) from the vinyl chloride monomer production (via the acetylene process) along with residues from other processes. The PCDD/PCDF fingerprint revealed that most samples from the chemical landfill showed an EDC PCDD/PCDF pattern with a characteristic octachlorodibenzofuran dominance. The PCDD/PCDF pattern of a Rio Grande sediment samples downstream the facility showed a chlor-alkali pattern with a minor impact of the EDC pattern. The case highlights that PCDD/PCDF- and persistent organic pollutants-contaminated sites need to be identified in a comprehensive manner as required by the Stockholm Convention (article 6) and controlled for their impact on the environment and human health. Landfill mining and reuse of materials from contaminated deposits should be prohibited.     

Earthworm ecotoxicological assessments of pesticides used to treat seeds under tropical conditions

Ecotoxicological laboratory tests (lower-tier tests) are fundamental tools for assessing the toxicity of pesticides to soil organisms. In this study, using these tests under tropical conditions, we quantified the impact of the insecticides imidacloprid, fipronil, and thiametoxam, and the fungicides captan and carboxin + thiram, all of which are used in the chemical treatment of crop seeds, on the survival, reproduction, and behavior of Eisenia andrei (Oligochaeta). With the exception of imidacloprid, none of the pesticides tested caused mortality in E. andrei in artificial soils. The LC₅₀ of imidacloprid was estimated as 25.53 mg active ingredient kg^?1 of dry soil. Earthworm reproduction rates were reduced by imidacloprid (EC₅₀ = 4.07 mg kg^?1), fipronil (EC₂₀ = 23.16 mg kg^?1), carboxin + thiram (EC₅₀ = 56.38 mg kg^?1), captan (EC₅₀ = 334.84 mg kg^?1), and thiametoxam (EC₅₀ = 791.99 mg kg^?1). Avoidance behavior was observed in the presence of imidacloprid (AC₅₀ = 0.11 mg kg^?1), captan (AC₅₀ = 33.54 mg kg^?1), carboxin + thiram (AC₅₀ = 60.32 mg kg^?1), and thiametoxam (AC₅₀ = >20 mg kg^?1). Earthworms showed a preference for soils with the insecticide fipronil. Imidacloprid was the most toxic of the substances tested for E. andrei. The avoidance test was the most sensitive test for most pesticides studied, but results varied between pesticides. These results offer new insights on the toxicity of pesticides used to treat seeds in tropical regions. However, they should be complemented with higher-tier tests in order to reduce the uncertainties in risk assessment.     

Comparing the sensitivity of soil invertebrates to pesticides with that of Eisenia fetida

The sole routine testing of the standard earthworm Eisenia fetida for the terrestrial risk assessment of pesticides has been under much debate since other soil invertebrates may be more sensitive than this standard test species. However, the very low availability of laboratory toxicity data for taxa other than E. fetida has greatly hampered sensitivity comparisons. In the present study, the relative tolerance (T_rel) approach was used to enable comparing toxicity thresholds obtained from the US-EPA ECOTOX database, for main terrestrial taxonomic groups and pesticidal types of action (insecticides, fungicides, herbicides, and other) separately. Analyses confirmed previously reported lower and higher sensitivity of collembolans to fungicides and insecticides, respectively. However, various other discrepancies in susceptibility relative to E. fetida were encountered as indicated by species sensitivity distributions and/or calculated 95% confidence intervals of T_rel values. Arachnids and isopods were found to be more sensitive to insecticides, and nematodes to fungicides, as compared to E. fetida. Implications of study findings for the terrestrial risk assessment of pesticides are discussed.     

Atmospheric composition change research: Time to go post-normal?

For more than two decades a number of frameworks for scientific knowledge production are being proposed by science and technology researchers. They all advocate an extended involvement of non-specialists, in particular when it comes to knowledge production applicable to practical societal problems. We look to what extent these new frameworks have taken ground within a particular research community: the ACCENT Network of Excellence which coordinates European atmospheric chemistry and physics research applicable to air pollution and climate change. We did so by stimulating a debate through a “blog”, a survey and in-depth interviews with ACCENT scientists about the interaction between science, policy making and civil society, to which a great deal of ACCENT member contributed in writing or verbally. Most of them had interactions with policy makers and/or the general public, and they generally believe that interactions with spheres other than the scientific are needed. While such interactions give personal insight and satisfaction, they seem to have little impact on the goals and the practice of the scientific work itself. Extended frameworks of science production that go beyond the disciplinary mode seem to emerge at the level of individual scientists, yet they still need to find their way to the level of scientific project management. In this paper we discuss the justifications and barriers to implement a higher degree of extended knowledge integration in applied science projects such as ACCENT. It is felt that the community of atmospheric chemists and physicists is mature for such an implementation and recommendations are given to help and make this happen.