High rate mesophilic, thermophilic, and temperature phased anaerobic digestion of waste activated sludge: a pilot scale study

The paper reports the findings of a two-year pilot scale experimental trial for the mesophilic (35°C), thermophilic (55°C) and temperature phased (65+55°C) anaerobic digestion of waste activated sludge. During the mesophilic and thermophilic runs, the reactor operated at an organic loading rate of 2.2 kgVS/m(3)d and a hydraulic retention time of 20 days. In the temperature phased run, the first reactor operated at an organic loading rate of 15 kgVS/m(3)d and a hydraulic retention time of 2 days while the second reactor operated at an organic loading rate of 2.2 kgVS/m(3)d and a hydraulic retention time of 18 days (20 days for the whole temperature phased system). The performance of the reactor improved with increases in temperature. The COD removal increased from 35% in mesophilic conditions, to 45% in thermophilic conditions, and 55% in the two stage temperature phased system. As a consequence, the specific biogas production increased from 0.33 to 0.45 and to 0.49 m(3)/kgVS(fed) at 35, 55, and 65+55°C, respectively. The extreme thermophilic reactor working at 65°C showed a high hydrolytic capability and a specific yield of 0.33 g COD (soluble) per gVS(fed). The effluent of the extreme thermophilic reactor showed an average concentration of soluble COD and volatile fatty acids of 20 and 9 g/l, respectively. Acetic and propionic acids were the main compounds found in the acids mixture. Because of the improved digestion efficiency, organic nitrogen and phosphorus were solubilised in the bulk. Their concentration, however, did not increase as expected because of the formation of salts of hydroxyapatite and struvite inside the reactor.     

Modelling radiative balance in a row-crop canopy: Cross-row distribution of net radiation at the soil surface and energy available to clusters in a vineyard

Distribution of energy at the soil surface in a row-crop influences mainly soil temperature and water content, and therefore root activity, nitrogen mineralization and within canopy air temperature, which all affect plant physiology. In the case of a vineyard, it is also closely related to the energy available to the berries and therefore most influential for fruit quality. The aim of this study was to develop a simplified model of available energy distribution at the soil surface and at the bottom of the rows, where most of the clusters are located. Such a model would be helpful for optimising some aspects of row-crop management like training system choice, row geometry, leaf area density, and soil surface maintenance practices.The model simulated radiation balance at the soil surface, split up into downward and upward short- and long-wave fluxes. Row shadows were calculated at any point of the inter-row space, in interaction with actual row geometry and simplified porosity distribution within row volume. All hemispheric radiations (long-wave and diffuse solar radiation) were calculated according to view factors between the row and soil surfaces. Input variables were therefore incoming solar radiation over the canopy, air temperatures near the row walls and soil surface temperatures. Parameters were row geometry, dimensions and porosities.The model was validated in a 7 years old Merlot vineyard in the Médoc area, by comparing model predictions to measured net radiation (Rns) at five positions above the inter-row soil surface. Along the row sampling was achieved by a moving device carrying the net-radiometers. Structure of the vegetation was kept constant during the experiment and gap fraction parameters were derived from pictures of shadows at the soil surface. Since Rns measurements are impracticable directly at the soil surface and horizontal distribution of Rns is heterogeneous, comparison was performed by calculating net radiation at the actual measurement height which was close to average cluster height.Model prediction agreed with field measurement in most conditions, which suggests that all short- and long-wave radiation fluxes, as well as interactions with the canopy structure, were well described. Rns, energy available to clusters, and soil surface temperature variations were all mainly driven by shading due to the rows. Coupling the model to soil heat transfer and convective fluxes to the atmosphere models will help forecasting soil temperature distribution at the surface and in depth as well as canopy microclimate. The model will also be an essential part of a more elaborate model of cluster microclimate, a key determinant of berry quality.     

Radio (<Superscript>14</Superscript>C)- and fluorescent-doubly labeled silica nanoparticles for biological and environmental toxicity assessment

A new and efficient synthetic route to fluorescent and ¹⁴C-double-labeled silica-based nanoparticles (NPs) is described. The synthesis has been carried out using the “oil-in-water” micro-emulsion technique. Fluorescent and radioactive labeling have been achieved entrapping labeled poly(ethylene glycol) (PEG) molecules in the NPs. The produced particles have been analyzed by means of scanning electron microscopy, photon correlation spectroscopy, confocal microscopy, scintillation counting and oxidation/combustion experiments. Fluorescence quenching experiments confirm that the label is entrapped in the particles. The results presented suggest that the silica matrix does not block the β-radiations emitted from the labeled PEG molecules entrapped in the NPs.     

Forecasting the number of soil samples required to reduce remediation cost uncertainty

Sampling scheme design is an important step in the management of polluted sites. It largely controls the accuracy of remediation cost estimates. In practice, however, sampling is seldom designed to comply with a given level of remediation cost uncertainty. In this paper, we present a new technique that allows one to estimate of the number of samples that should be taken at a given stage of investigation to reach a forecasted level of accuracy. The uncertainty is expressed both in terms of volume of polluted soil and overall cost of remediation. This technique provides a flexible tool for decision makers to define the amount of investigation worth conducting from an environmental and financial perspective. The technique is based on nonlinear geostatistics (conditional simulations) to estimate the volume of soil that requires remediation and excavation and on a function allowing estimation of the total cost of remediation (including investigations). The geostatistical estimation accounts for support effect, information effect, and sampling errors. The cost calculation includes mainly investigation, excavation, remediation, and transportation. The application of the technique on a former smelting work site (lead pollution) demonstrates how the tool can be used. In this example, the forecasted volumetric uncertainty decreases rapidly for a relatively small number of samples (20-50) and then reaches a plateau (after 100 samples). The uncertainty related to the total remediation cost decreases while the expected total cost increases. Based on these forecasts, we show how a risk-prone decision maker would probably decide to take 50 additional samples while a risk-averse decision maker would take 100 samples.     

The role of door orientation on occupant injury in a nearside impact: a CIREN, MADYMO modeling and experimental study

OBJECTIVE: This study addressed the effects of vehicle height mismatch in side impact crashes. A light truck or SUV tends to strike the door of a passenger car higher causing the upper border to lead into the occupant space. Conversely, an impact centered lower on the door, from a passenger car, causes the lower border to lead. We proposed the hypothesis that the type of injury sustained by the occupant could be related to door orientation during its intrusion into the passenger compartment. METHOD: Data on door orientation and nearside occupant injuries were collected from 125 side impact crashes reported in the CIREN database. Experimental testing was performed using a pendulum carrying a frame and a vehicle door, impacting against a USDOT SID. The frame allowed the door orientation to be changed. A model was developed in MADYMO (v 6.2) using the more biofidelic dummies, BIOSID, and SIDIIs as well as USDOT SID. RESULTS: In side impact crashes with the lower border of the door leading, 81% of occupants sustained pelvic injury, 42% suffered rib fractures, and the rate of organ injury was 0.84. With the upper border leading, 46% of occupants sustained pelvic injury, 71% sustained rib fracture, and the rate of organ injuries per case increased to 1.13. The differences in the groups with respect to pelvic injury were significant at p = 0.01, rib fracture, p = 0.10, and organ injury, p = 0.001. Experimental testing showed that when the door angle changed from lower to upper border leading, peak T4 acceleration increased by 273% and pelvic acceleration decreased by 44%. The model demonstrated that when the door angle changed from lower to upper border leading, the USDOT SID showed a 29% increase in T4 acceleration and a 57% decrease in pelvic acceleration. The BIOSID dummy demonstrated a 36% increase in T1 acceleration, a 44% increase in abdominal rib 1 deflection, a 91% increase in thoracic rib 1 deflection, and a 33% decrease in pelvic acceleration. CONCLUSIONS: These data add more insight to the problem of mismatch during side impacts, where the bumper of the striking vehicle overrides the door beam, causing the upper part of the door to lead the intrusion into the passenger compartment. Even with the same delta V and intrusion, with the upper border of the door leading, more severe chest and organ injuries resulted. This data suggests that door orientation should be considered when testing subsystems for side impact protection.     

Natural and Artificial Functionalized Biopolyesters I. Chemoenzymatic Mediated Synthesis of Chiral Precursors

Design of optically active polymeric materials for temporary therapeutic and environmental applications requires the working-out of functionalized polymers with structures and properties adjusted to the considered applications. Biocompatibility of selected polymers is a required property in regard to the interactions between living organisms and macromolecular systems. It is therefore important to prepare highly optically active monomers and their corresponding hydrolyzable and biocompatible polymers. Bacterium Clostridium tetanomorphum is an useful source of enzymes for bioconversion and particularly in the chemoenzyrnatic route to optically active alkylmalolactonic acid esters and their optically pure stereoisomers. 3-Methylaspartase, involved in the glutamate fermentation pathway, is a very interesting enzyme, which can provide chiral precursors with high optically purity. This chemoenzymatic strategy can be used to prepare the four stereoisomers of 3-methylmalolaconic acid esters, by enzymatic resolution of natural and artificial stereoisomers of 3-methylaspartic acid. A series of 3-alkymalolactonic acid esters with alkyl equal to ethyl or isopropyl, have been also synthesized and transformed into corresponding optically active polyesters.     

Exploring barriers to climate change adaptation in the Swiss tourism sector

Increasingly, various sectors are affected by climate change and need to find ways to adapt with much public guidance and support. This paper examines the adaptation process of a sector that started it some time ago – Swiss Alpine tourism. It identifies barriers that may be relevant for all sectors, all along the successive phases of the adaptation process. It additionally identifies the barriers which are most important and how these can be overcome. In order to do this we use an online survey directed to Swiss tourism stakeholders. Our results indicate that both economic and social feasibility barriers are important impediments to the adjustment process, whereas the acceptability among inhabitants and the willingness to act of stakeholders appear less critical. These barriers can be overcome and adaptation facilitated with more and especially better information about the regional consequences of climate change and feasible adaptation measures, by some top-down leadership and coordination, and by providing financial support.     

Temperature and parasitism by <Emphasis Type="BoldItalic">Asobara tabida</Emphasis> (Hymenoptera: Braconidae) influence larval pupation behaviour in two <Emphasis Type="BoldItalic">Drosophila</Emphasis> species

In holometabolous insects, pupation site selection behaviour has large consequences for survival. Here, we investigated the combined effects of temperature and parasitism by the parasitoid Asobara tabida on larval pupation behaviour in two of its main Drosophila sp. hosts differing in their climate origin. We found that larvae of Drosophila melanogaster—a species with a (sub)tropical origin—placed at 25°C pupated higher in rearing jars than those placed at 15°C. The opposite pattern was observed for Drosophila subobscura larvae—a species from temperate regions—which pupated lower, i.e. on or near the substrate at 25°C, than those placed at 15°C. When placed at 25°C, parasitized larvae of both species pupated closer to the substrate than unparasitized ones. Moreover, the Drosophila larvae that had been exposed and probably stung by A. tabida, but were not parasitized, pupated lower than the control unparasitized larvae. These results provide new insights of host behaviour manipulation by A. tabida larvae.     

Conception of an environmental friendly O/W cosmetic emulsion from microalgae

The development of eco-friendly cosmetic such as those from microalgae for skin regeneration and collagen synthesis has gained a great interest worldwide. Accordingly, the potential of microalgae biomass as source of anti-aging cosmetic cream with high antioxidant activity has been investigated. Stabilities and sensory characteristics of cosmetic creams supplemented with Spirulina, Tetraselmis sp. and Dunaliella sp. at 0.5, 1.5 and 2.5%, respectively, revealed a conservation of physico-chemical and preliminary stability properties of formulations. To analyze physico-chemical and textural parameters, accelerated stability study was evaluated under two thermal conditions (25 and 40 °C) during 90 days. Results showed that pH values of all formulations were within the limits of normal skin pH range under storage time at 25 and 40 °C. During this period, the colored creams showed a significant changes of a* and b* indices, reflecting the instability of microalgae colors. Microalgae modified the textural characteristics of emulsions. The Tetraselmis sp. containing-cream had the lowest (P < 0.05)?values of hardness, springiness, and cohesiveness. The 0.5% Spirulina containing-cream had the best stable consistency and adhesiveness under time and temperature variations. It exhibited the best properties to be used for skin care products. Thanks to their high content in bioactive macromolecules, microalgae considerably improved the antioxidant activity of the new formulated skin creams.