Automatic sorting of zooplankton by isopycnic sedimentation in gradients of silica: Performance of a “Rho Spectrometer”

The embryonic and larval stages of the quahog clam Mercenaria sp. were exposed to the water-soluble fractions (WSFs) of 6 oils and the effects on survival and growth rate of the various stages were noted. Kuwait crude oil was the least toxic on initial exposure to both stages, having LC₅₀ values in excess of 10 ppm after continuous exposure to the WSF for up to 6 days. However, at 10 days, Kuwait was slightly more toxic than southern Louisiana crude oil, with both oils having LC₅₀ values near 2 ppm. Florida Jay crude oil was much more toxic, with an LC₅₀ of less than 1 ppm at 48 h and less than 0.2 ppm at 10 days. Two refined oils, No. 2 fuel oil and Bunker C, had LC₅₀ values of 1 to 2 ppm after 48 h, while used crankcase motor oil, the most toxic oil tested, had LC₅₀ values of 0.10 ppm or less at all exposure times. Larvae surviving exposure to water-soluble fractions of the various oils often grew at slower rates than the controls.     

Algal overgrowth of alcyonacean soft corals

Colonies of the soft coral Lobophytum pauciflorum (Ehrenberg, 1834) (Coelenterata: Octocorallia: Alcyonacea: Alcyoniidae), some of which were heavily overgrown by the algae Ceranium flaccidum (Kuetzing) Ardissone and Enteromorpha sp., and other minor epizoites, were collected at Taylor Reef (17°50S; 146°35E) in the Great Barrier Reef. Overgrown colonies contained the diterpene 2-epi-sarcophytoxide as the major secondary metabolite, while conspecific colonies with clean polyparies contained two diterpenes in approximately equal amounts: 14-hydroxycembra-1,3,7,11-tetraene and 15-hydroxycembra-1,3,7,11-tetraene. By contrast, twenty conspecific pairs of overgrown and clean colonies of other alcyoniid soft corals collected from Pelorus Channel, Palm Island Group (18°34S; 146°29E), showed no chemical differences within in the pairs. Cultures of a common species of Ceramium [C. codii (Richards) Mazoyer] were incubated with different concentrations of nine soft-coral-derived diterpenes and significant algal growth inhibition was observed in many cases. It appears that terpenoids from soft coral may contribute to the lack of epizoic organisms on soft-coral polyparies.     

POTENTIAL EFFECTS OF DEVELOPMENT ON FLOW CHARACTERISTICS OF TWO NEW JERSEY STREAMS1

ABSTRACT: Parts of the Raritan River basin in central New Jersey have undergone increasing development over the last several decades. The increasing population relies on the region's ground water and surface water sources for its residential, commercial, and industrial water supply. Urbanization, regionalized wastewater-treatment facilities, stream channel alterations, and interbasin transfers of water can all affect water availability. This pilot study was conducted to determine whether significant trends exist in the base-flow and overland-runoff characteristics of streams in two subbasins with different percentages of urban/built-up land (Anderson et at., 1976). Changes in flow characteristics that could indicate future reductions in safe water yield of the Raritan River basin were examined. Flow and flow variability of the steams draining these two subbasins have increased over time. Many of the flow measures studied experienced pronounced trend shifts about 1960. The cause of these changes cannot be readily determined from the data, nor is it clear whether the increased flow variability lies outside the natural range of flow variability of the streams draining the subbasins.     

Accounting for intended use application in characterizing the contributions of cyclopentasiloxane (D5) to aquatic loadings following personal care product use: Antiperspirants,skin care products and hair care products

Decamethylcyclopentasiloxane, commonly known as D5 (cyclopentasiloxane) has a wide application of use across a multitude of personal care product categories. The relative volatility of D5 is one of the key properties attributed to this substance that provide for the derived performance benefits from the use of this raw material in personal care formulations. On this basis, rapid evaporative loss following use of many products comprising D5 is expected following typical use application and corresponding wear time.     

Airborne Emissions of Mercury from Municipal Solid Waste. II: Potential Losses of Airborne Mercury before Landfill

Abstract

Waste distribution and compaction at the working face of municipal waste landfills releases mercury vapor (Hg⁰) to the atmosphere, as does the flaring of landfill gas. Waste storage and processing before its addition to the landfill also has the potential to release Hg⁰ to the air if it is initially present or formed by chemical reduction of Hg^II to Hg⁰ within collected waste. We measured the release of Hg vapor to the atmosphere during dumpster and transfer station activities and waste storage before landfilling at a municipal landfill operation in central Florida. We also quantified the potential contribution of specific Hg-bearing wastes, including mercury (Hg) thermometers and fluorescent bulbs, and searched for primary Hg sources in sorted wastes at three different landfills. Surprisingly large fluxes were estimated for Hg losses at transfer facilities (～100 mg/hr) and from dumpsters in the field (～30 mg/hr for 1,000 dumpsters), suggesting that Hg emissions occurring before landfilling may constitute a significant fraction of the total emission from the disposal/landfill cycle and a need for more measurements on these sources. Reducing conditions of landfill burial were obviously not needed to generate strong Hg⁰ signals, indicating that much of the Hg was already present in a metallic (Hg⁰) form. Attempts to identify specific Hg sources in excavated and sorted waste indicated few readily identifiable sources; because of effective mixing and diffusion of Hg⁰, the entire waste mass acts as a source. Broken fluorescent bulbs and thermometers in dumpsters emitted Hg⁰ at 10 to >100 μg/hr and continued to act as near constant sources for several days.     

Monitoring of atrazine in milk using a rapid tube-based ELISA and validation with HPLC

Although atrazine has been banned in the European Union since 2007 it still persists in soil from where it can enter the food chain. Milk-producing animals accumulate atrazine from contaminated feed and water and since large quantities of milk and milk products are consumed its quality should be constantly monitored. The objective of this investigation was to develop a simple tube ELISA procedure suitable for use in non-specialised laboratories and in the field. A polyclonal antibody raised in sheep and the hapten-gelatine conjugate was immobilised onto polystyrene tubes. This enables the colour produced to be read on a basic spectrophotometer. Milk samples were collected from three farms in different regions of Poland and diluted before immunoassay was performed. Samples were extracted with hexane-acetone for HPLC analysis. The amount of fat in the milk samples interferes with the dose response so it essential that the standards are prepared in the same samples matrix. A good correlation between 1% and 2% was found between the two methods in the analysis of real samples. However the ELISA procedure was more sensitive that the HPLC method since atrazine was detected in some samples by the ELISA but was not confirmed by the HPLC method. The study demonstrated that the simple antigen-coated tube assay provides a cost effective and valuable screening test that can be easily modified for direct use as a screening tool in the field.     

Realising a resilient and sustainable built environment: towards a strategic agenda for the United Kingdom

Recent natural and human-induced emergencies have highlighted the vulnerability of the built environment. Although most emergency events are not entirely unexpected, and the effects can be mitigated, emergency managers in the United Kingdom have not played a sufficiently proactive role in the mitigation of such events. If a resilient and sustainable built environment is to be achieved, emergency management should be more proactive and receive greater input from the stakeholders responsible for the planning, design, construction and operation of the built environment. This paper highlights the need for emergency management to take a more systematic approach to hazard mitigation by integrating more with professions from the construction sector. In particular, design changes may have to be considered, critical infrastructures must be protected, planning policies should be reviewed, and resilient and sustainable agendas adopted by all stakeholders.     

A case study on the influence of a magnetic shielding retrofit on the static magnetic field present in a Magnetic Resonance Imaging (MRI) suite

PurposeThe purpose of this research is to assess whether the practice of retro-fitting passive magnetic shielding to Magnetic Resonance Imaging (MRI) suites is effective in retaining the 0.5 mT footprint of the static magnetic field to within its designed position.MethodologyThe research methodology involved identification of an MRI installation where passive magnetic shielding was to be fitted to an installation already in operational use. Site based physical measurements of the magnetic flux density of the static field were then taken both ante and post installation of the shielding, so as to be able to determine its effectiveness.FindingsThe results identified areas in the retrofitted magnetic shielding where, as a result of its design, hot spots in excess of 0.5 mT occurred.Practical implicationsThis research highlights design, construction and safety issues that the designer could, if he had this prior knowledge, have eliminated at source.ValueAt the planning stage of a new MRI suite, designers could use the information contained in this research as part of their design risk management process. This research serves to demonstrate the importance of eliminating any possible future need to install retrofitted passive magnetic shielding to an original MRI suite design. It also shows the need for designers to identify the location of any hot spots in the shielding installation where the magnetic flux density may exceed 0.5 mT and become a potential hazard to those individuals fitted with heart pacemakers or other electronic body implants.