Levels and distribution of persistent organochlorine pesticide residues in water and sediments of Gomti River (India)—a tributary of the Ganges River

This study reports the concentration levels and distribution pattern of the persistent organochlorine pesticide (OCPs) residues in the water and bed-sediments of the Gomti River collected seasonally over a period of 2 years. The water and bed-sediment samples were collected from eight different sites and analyzed for aldrin, dieldrin, endrin, HCB, HCH isomers, DDT isomers/metabolites, endosulfan isomers (alpha and beta), endosulfan sulfate, heptachlor and its metabolites, alpha-chlordane, gamma-chlordane and methoxychlor. In the river water and sediments SigmaOCPs residues ranged between 2.16 and 567.49 ng l(-1) and 0.92 and 813.59 ng g(-1), respectively. The results, further, suggested that source of DDT contamination is from the aged and weathered agricultural soils with signature of recently used DDT in the river catchments. To assess any adverse effect of OCPs contamination on river's biological component, the threshold effect level (TEL) was used. The results revealed that bed-sediments of the Gomti River are contaminated with lindane, endrin, heptachlor epoxides and DDT, particularly at site-4 and may contribute to sediment toxicity in the freshwater ecosystem of the river.     

Biodegradation of Poly(ε-caprolactone) (PCL) Film by <Emphasis Type="Italic">Alcaligenes faecalis</Emphasis>

The biodegradation behavior of PCL film with high molecular weight (80,000 Da) in presence of bacterium Alcaligenes faecalis and the analysis of degraded polymer film have been carried out. Thin Films of PCL were prepared by means of solution casting method and the bacterial degradation behavior was carried in basal medium, in presence of bacteria with time variation after UV treatment. It was observed that after UV treatment the degradation of polymer film was increased and the degradation rate followed a three steps degradation mechanism. The degraded polymer film was analyzed by means of Differential Scanning Calorimeter (DSC), Thermo Gravimetric Analyzer (TGA) and Fourier Transform Infrared Spectroscope (FTIR). DSC results revealed that at the initial stages of the degradation up to 15–20 days, the bacterium preferentially degrades the amorphous parts of the polymer film over the crystalline zone. Thermo gravimetric analysis highlighted the low temperature stability of degraded films with extent of degradation. FTIR results showed the chain scission mechanism of the polymer chains and also supported the preferential degradation of amorphous phase over crystalline phase in the initial stages of the degradation.     

Economic liabilities of environmental pollution by coal mining: Indian scenario

India is the first country to introduce environmental legislation in the constitution but because of lengthy legal procedures, it is very difficult to control environmental deterioration. There are many factors responsible for this deterioration. Coal mining is one such activity where deterioration is very severe and the present communication aims this aspect. Coal is the one of the most essential mineral having large reserves in India. It’s mining and beneficiation produce a variety of pollutants. The main pollutants emitted during the processing of coal are green house gases, coal dust and acid mine drainage. Many reports on different aspects of coal mining are available including reports on emission of different pollutants but the present work is probably only of it’s kind in which the authors have tried to determine environment liability directly in terms of economy. It was found that greenhouse liabilities, coal dust liability and sulphur liability are accounted for 12.07, 5.0 and 101.97 US$, making an overall 2.4% of the total economic gains due to coal mining. During the calculations approximate number of total workers and other parameters have been taken into consideration. Who pays for this irreversible damage is a question. Readers should send their comments on this paper to: BhaskarNath@aol.com within 3 months of publication of this issue.     

Characteristics of carbonaceous aerosols derived from long-term high-resolution measurements at a high-altitude site in the central Himalayas: radiative forcing estimates and role of meteorology and biomass burning

Environmental Science and Pollution Research - Simultaneous observations (2014–2017) of organic carbon (OC) and elemental carbon (EC) are made over a high-altitude site (Nainital,...     

Electrospinning production of nanofibrous membranes

Environmental Chemistry Letters - Electrospinning has attracted a worldwide interest as a technique for the production of nanofibrous membranes with diameter ranging 2&nbsp;nm to several...     

Distribution and correlation of radon and uranium and associated hydrogeochemical processes in alluvial aquifers of northwest India

Environmental Science and Pollution Research - The spatial and vertical distributions of radon and uranium are evaluated in relation to the hydrogeology, geomorphology, and hydrochemistry of...     

Application of enzyme-mediated cellulose nanofibers from lemongrass waste for the controlled release of anticancer drugs

Environmental Science and Pollution Research - In the present study, an application of cellulose nanofibers has been established for the controlled release of an anticancer drug, i.e.,...     

Is rainfall gradient a factor of livelihood diversification? Empirical evidence from around climatic hotspots in Indo-Gangetic Plains

Farmers in the Indo-Gangetic Plains are constantly seeking ways to adapt to changing circumstances and opportunities that include new technologies, institutions, policies, socio-economic and cultural shifts, as well as a changing climate. The relationship between rainfall and local livelihoods is important to devise policies to improve adaptive capacity of farmers to different drivers of changes. The present study investigates whether the spatial variations in rainfall have prompted the location-specific livelihood diversification by using data from 2660 farm families in the climatic risk areas in India, Nepal and Bangladesh. The results show a higher on-farm livelihood diversification in the areas with high rainfall (1500–2100 mm) compared to medium (900–1500 mm) and very high rainfall regimes (>2100 mm). Based on this study, the optimal range of rainfall for better agricultural livelihood in the context of changing environmental circumstances is from 1500 to 2100 mm. In terms of farm practices changed (proxy of adaptability), farmers responded more frequently to the market-related drivers than climatic stressors. Farmers in climate vulnerable areas (Bihar and coastal Bangladesh for instance) responded more to climatic stressors than those living in relatively less vulnerable areas (Terai for instance). The results imply that livelihood strategies should be tailor-made along the climatic resources such as rainfall, considering other biophysical and socio-economic variations at the spatial scale. Identifying household and farm-level coping strategies along the rainfall gradient can also be useful in targeting interventions to build resilience to shocks.     

Effects of fuel reactivity and injection timing on diesel engine combustion and emissions

Recent strategies for simultaneously reducing NOx and soot emissions have focused on achieving nearly premixed, low-temperature combustion (LTC) in diesel engines. A promising approach in this regard is to vary fuel reactivity in order to control the ignition delay and optimize the level of premixing and reduce emissions. The present study examines such a strategy by performing 3-D simulations in a single-cylinder of a diesel engine. Simulations employ the state-of-the-art two-phase models and a validated semi-detailed reaction mechanism. The fuel reactivity is varied by using a blend of n-heptane and iso-octane, which represent surrogates for gasoline and diesel fuels, respectively. Results indicate that the fuel reactivity strongly influences ignition delay and combustion phasing, whereas the start of injection (SOI) affects combustion phasing. As fuel reactivity is reduced, the ignition delay is increased and the combustion phasing is retarded. The longer ignition delay provides additional time for mixing, and reduces equivalence ratio stratification. Consequently, the premixed combustion is enhanced relative to diffusion combustion, and thus the soot emission is reduced. NO_x emission is also reduced due to reduced diffusion combustion and lower peak temperatures caused by delayed combustion phasing. An operability range is observed in terms of fuel reactivity and SOI, beyond which the mixture may not be sufficiently well mixed, or compression ignited. The study demonstrates the possibility of finding an optimum range of fuel reactivity, SOI, and EGR for significantly reducing engine out emissions for a given load and speed.     

Cost Effective Production of Poly-β-Hydroxybutyrate by Bacillus subtilis NG05 Using Sugar Industry Waste Water

The present study describes the treatment of sugar industry waste water and its use as a potential low cost substrate for production of bioplastic by Bacillus subtilis NG05. The B. subtilis NG05 grow at the rate of 0.14 g h^?1 L^?1 of production media used and accumulate the 50.1 % of poly β-hydroxybutyrate (PHB). The phase contrast microscopy revealed the presence of PHB granules in B. subtilis NG05 which was further confirmed by Fourier transform infrared spectroscopy and ¹H-nuclear magnetic resonance. The polymer was further analysed by differential scanning calorimetry. PHB production yield was achieved up to 4.991 g L^?1 with Sugar industry waste water as sole nutrient source. Thus the process provided dual benefits of conversion of a waste material into value added product, PHB and waste management.