g-C_3N_4/C@Bi_2MoO_6复合光催化剂的制备及其光催化活性

通过水热合成法和液相沉积法制备g-C_3N_4/C@Bi_2MoO_6复合光催化剂,并采用X射线衍射、扫描电子显微镜、氮气吸脱附、紫外-可见漫反射等技术对其进行表征。研究了可见光下g-C_3N_4/C@Bi_2MoO_6催化降解罗丹明B(Rh B)的影响因素,并对其光催化反应机理进行初步探讨。实验结果表明:g-C_3N_4掺杂量为60%(w)时g-C_3N_4/C@Bi_2MoO_6的光催化活性最高;在60%g-C_3N_4/C@Bi_2MoO_6的投加量为1.00 g/L、初始Rh B质量浓度为2.50 mg/L、可见光照射150 min的条件下,Rh B的降解率达到97.90%;在g-C_3N_4/C@Bi_2MoO_6光催化降解体系中,h~+和·O_2~-是主要活性物种。     

Effects of Compounded Curing Agents on Properties and Performance of Urea Formaldehyde Resin

The effects of three compounded curing agents on the properties and performance of the urea-formaldehyde (UF) resin were investigated in this study. The compounded curing agents were prepared by mixing ammonium chloride with hexamethylenetetramine, citric acid, and oxalic acid respectively at a ratio of 1:1, named N-H, N–CA, and N–OA, respectively. The curing process, crystallinity, and physical properties were measured, and the three-ply plywood was fabricated to measure its prepress strength, wet shear strength, and formaldehyde emission. Results showed that the compounded curing agents N–CA and N–OA enhanced the initial viscosity, crosslinking density and thermal stability of UF resin. Additionally, the prepress strength of the plywood bonded by UF resin with N–CA and N–OA increased by 82 and 111% respectively compared to the UF resin with NH₄Cl, and the wet shear strength increased by 14 and 16%, the formaldehyde emission decreased by 19 and 42% respectively. However, owing to the short pot-life of these curing agent limited their storage time, the curing agents N–CA and N–OA should be applied to fabricate plywood in winter for obtaining a better bond strength and a lower formaldehyde emission. While the UF resin with N–HT showed a suitable pot-life, so it could be applied to fabricate plywood in summer for long time storage and avoiding procuring problem.     

Highly efficient conversion of sugarcane bagasse pretreated with liquid hot water into ethanol at high solid loading

Liquid hot water (LHW), an environmental-friendly physico-chemical treatment, was applied to pretreat the sugarcane bagasse (SCB). Tween80, a non-ionic surfactant, was used to enhance the enzymatic hydrolysis of the pretreated SCB. It found that 0.125 mL Tween80 /g dry matter could make the maximum increase (33.2%) of the glycan conversion of the LHW-pretreated SCB. A self-designed laboratory facility with a plate-and-frame impeller was applied to conduct batch hydrolysis, fed-batch hydrolysis, and the process of high-temperature (50°C) fed-batch hydrolysis following low-temperature (30°C) simultaneous saccharification and fermentation (SSF) which was adopted to overcome the incompatible optimum temperature of saccharification and fermentation in the SSF process. After hydrolyzing LHW-pretreated SCB for 120 h with commercial cellulase, the total sugar concentration and glycan conversion obtained from fed-batch hydrolysis were 91.6 g/L and 68.3%, respectively, which were 9.7 g/L and 7.3% higher than those obtained from batch hydrolysis. With Saccharomyces cerevisiae Y2034 fermenting under the non-sterile condition, the ethanol production and theoretical yield obtained from the process of SSF after fed-batch hydrolysis were 55.4 g/L and 88.3% for 72h, respectively, which were 15.5 g/L and 24.7% higher than those from separate fed-batch hydrolysis and fermentation. The result of this work was superior to the reported results obtained from the LHW-pretreated SCB.     

Efficacy of Si fertilization to modulate the heavy metals absorption by barley (Hordeum vulgare L.) and pea (Pisum sativum L.)

Silicon-based fertilizers and soil amendments can have direct and indirect positive influences on cultivated plants. The solid forms of Si-based substances, the most widespread in use, are efficient only at high application rates due to their low level of solubility. Several types of Si-based substances such as fumed silica, slags from the iron and steel industry, modified slags, and a Si-rich product were tested using barley and pea as silicon accumulative and non-accumulative plants, respectively, at two application rates. The plants were grown under toxic concentrations of heavy metals in a greenhouse. Si-rich materials high in water-soluble Si had a positive effect at both the low and high application rates, and for both plant species. This type of substance can be regarded as Si fertilizer, demonstrating greater efficiency at a low application rate and lessened efficiency at a high application rate for protection of the cultivated plants against accumulation of the heavy metals.

     

西昌高原鳅人工繁殖技术研究

对西昌高原鳅(Triplophysa xichangensis)人工繁殖中的催产药物及其剂量、受精方式、孵化方法和仔鱼水花培育方法等一系列关键技术进行了详细研究。结果表明,对性腺发育至Ⅳ+~Ⅳ++期的雌鱼分二次注射LRH-A2 0.1μg/g(鱼体重)和HCG 20 IU/g(鱼体重),雄鱼剂量减半,注射量0.1 mL,能很好地促进雌雄鱼发情并产卵排精,在水温19±0.5℃时的效应时间为30.5~31 h;在一个特制的塑料盆中完成了亲鱼培育、打针催产、发情、自然产卵受精、孵化以及仔鱼培育等全部人工繁殖过程,受精率、孵化率和仔鱼水花培育20 d的成活率平均分别为97.2%、85%和85%。本研究成果可应用于西昌高原鳅规模化繁育,对长江上游鱼类生物多样性保护有着积极意义。     

Decoupling of nonferrous metal consumption from economic growth in China

Nonferrous metal is an important basis material for the development of the national economy, and its consumption directly affects economic development. It has great significance in the effective utilization of nonferrous metals, development of an environment-friendly society, and investigation of the decoupling of nonferrous metal consumption and GDP growth. The decoupling indicators for nonferrous metal consumption and GDP growth (D _r) in China from 1995 to 2010 were calculated in this study, and the results were analyzed. A productive model based on BP neural network was established. Then, the decoupling indicators for nonferrous metal consumption and GDP growth in China for the period of 2011–2020 were predicted. For the period of 1995–2010, the annual average decoupling indicators were <1 for copper, aluminum, zinc, lead, and nickel, except for tin, which was 0.21. The analysis showed that the decoupling of nonferrous metal consumption and GDP growth is in a less optimistic situation to copper, aluminum, zinc, lead, and nickel in China from 1995 to 2010. The annual average decoupling indicator for tin was 0.21, which indicates relative decoupling. For the period of 2011–2020, the predicted decoupling indicators for copper, aluminum, zinc, lead, nickel, and tin were between 0 and 1. This finding indicates the implementation of relative decoupling. However, the total consumption of nonferrous metals did not decouple from GDP growth.     

光照条件对跑道池光生物反应器内蛋白核小球藻生长特性的影响

本文采用多孔曝气管的曝气方式,以蠕动泵为藻液循环的动力,研究了气体流量、光照强度、光照周期等因素对跑道池光生物反应器内蛋白核小球藻生长与代谢特性的影响,并利用傅里叶红外光谱半定量法对不同光照条件下藻细胞内蛋白质、油脂以及多糖含量变化进行了分析。研究结果表明,适当的气体流量、光照强度和光照周期有利于跑道池内蛋白核小球藻细胞的生长和代谢。在本实验条件下,在最佳气体流量2 000 m L/min条件下,光照强度为3 500μW/cm2,光照周期为16∶8时最有利于蛋白核小球藻的生长;光照强度为2 000μW/cm2和光照周期为16∶8的条件均有利于藻细胞内油脂的积累。     

循环序批式活性污泥反应器的调试及运行

介绍了循环序批式活性污泥反应器的工艺流程及设计参数、调试和运行情况,分析探讨了系统运行中出现的一些问题。稳定运行期间的检测结果表明,反应器对COD和NH3-N具有较好的去除效果,平均去除率分别达到86.2%和92.1%,但对TP的去除率有待提高。     

生物滴滤塔净化挥发性有机废气动力学模型研究

通过对生物滴滤塔净化VOCs废气过程的分析,建立了动力学模型,简化处理后得出了基于生物降解为一级反应动力学和零级反应动力学的污染物浓度沿填料层高度变化的方程,并通过实验数据对方程进行了验证,结果表明基于生物降解一级反应动力学的方程能较好地与实验数据吻合,但常数ξα/Q却随入口浓度Cgi的增大而升高。最后,采用实验数据回归出了ξα/Q随Cg变化的曲线。     

隔油沉淀-预曝调节-接触氧化-气浮工艺处理屠宰加工废水

对屠宰加工过程中产生的中高浓度有机废水采用预曝调节-接触氧化-气浮工艺进行处理。当进水COD浓度为980~1200mg/L时,出水COD浓度可降至76.1~104mg/L,优于国家《肉类加工工业水污染物排放标准》(GB13457-92)二级标准,此工艺的抗冲击负荷能力较强,适应于间歇性生产和季节性生产的屠宰加工企业。