Microcystis aeruginosa/Pseudomonas pseudoalcaligenes interaction effects on off-flavors in algae/bacteria co-culture system under different temperatures

We conducted an experiment to study the interaction effects of Microcystis aeruginosa and Pseudomonas pseudoalcaligenes on off-flavors in an algae/bacteria co-culture system at three temperatures (24, 28 and 32°C). Gas chromatography–mass spectrometry was applied to measure off-flavor compounds dimethyl sulfide (DMS), dimethyl trisulfide (DMTS), 2-methylisoborneol, geosmin (GEO) and β-cyclocitral. During the lag phase of co-cultured M. aeruginosa (first 15 days), P. pseudoalcaligenes significantly increased the production of DMS, DMTS and β-cyclocitral at all three temperatures. In the exponential phase of co-cultured M. aeruginosa (after 15 days), M. aeruginosa became the main factor on off-flavors in the co-culture system, and β-cyclocitral turned to the highest off-flavor compound. These results also indicated that DMS, DMTS and β-cyclocitral were the main off-flavor compounds in our M. aeruginosa/P. pseudoalcaligenes co-culture system. Univariate analysis was applied to investigate the effects of M. aeruginosa and P. pseudoalcaligenes on the production of off-flavors. The results demonstrated that both M. aeruginosa and P. pseudoalcaligenes could increase the production of DMS and DMTS, while β-cyclocitral was mainly determined by M. aeruginosa. Our results also provide some insights into understanding the relationship between cyanobacteria and heterotrophic bacteria.     

Phosphine in paddy fields and the effects of environmental factors

Ambient levels of phosphine (PH₃) in the air, phosphine emission fluxes from paddy fields and rice plants, and the distribution of matrix-bound phosphine (MBP) in paddy soils were investigated throughout the growing stages of rice. The relationships between MBP and environmental factors were analyzed to identify the principal factors determining the distribution of MBP. The phosphine ambient levels ranged from 2.368 ± 0.6060 ng m⁻³ to 24.83 ± 6.529 ng m⁻³ and averaged 14.25 ± 4.547 ng m⁻³. The highest phosphine emission flux was 22.54 ± 3.897 ng (m² h)⁻¹, the lowest flux was 7.64 ± 4.83 ng (m² h)⁻¹, and the average flux was 14.17 ± 4.977 ng (m² h)⁻¹. Rice plants transport a significant portion of the phosphine emitted from the paddy fields. The highest contribution rate of rice plants to the phosphine emission fluxes reached 73.73% and the average contribution was 43.00%. The average MBP content of 111.6 ng kg⁻¹fluctuated significantly in different stages of rice growth and initially increased then decreased with increasing depth. The peak MBP content in each growth stage occurred approximately 10 cm under the surface of paddy soils. Pearson correlation analyses and stepwise multiple regression analysis showed that soil temperature (Ts), acid phosphatase (ACP) and total phosphorus (TP) were the principal environmental factors, with correlative rankings of Ts > ACP > TP.     

Pollution characteristics of ambient volatile organic compounds (VOCs) in the southeast coastal cities of China

With the rapid urbanization, the southeast coastal cities of China are facing increasing air pollution in the past decades. Large emissions of VOCs from vehicles and petrochemical factories have contributed greatly to the local air quality deterioration. Investigating the pollution characteristics of VOCs is of great significance to the environmental risk assessment and air quality improvement. Ambient VOC samples were collected simultaneously from nine coastal cities of southeast China using the Tedlar bags, and were subsequently preprocessed and analyzed using a cryogenic preconcentrator and a gas chromatography–mass spectrometry system, respectively. VOC compositions, spatial distributions, seasonal variations and ozone formation potentials (OPFs) were discussed. Results showed that methylene chloride, toluene, isopropyl alcohol and n-hexane were most abundant species, and oxygenated compounds, aromatics and halogenated hydrocarbons were most abundant chemical classes (62.5–95.6 % of TVOCs). Both industrial and vehicular exhausts might contribute greatly to the VOC emissions. The VOC levels in the southeast coastal cities of China were sufficiently high (e.g., 6.5 μg?m^?3 for benzene) to pose a health risk to local people. A more serious pollution state was found in the southern cities of the study region, while higher VOC levels were usually observed in winter. The B/T ratio (0.26?±?0.09) was lower than the typical ratio (ca. 0.6) for roadside samples, while the B/E (1.6–7.6) and T/E (7.2–26.8) ratios were higher than other cities around the world, which indicated a unique emission profile in the study region. Besides, analysis on ozone formation potentials (OFPs) indicated that toluene was the most important species in ozone production with the accountabilities for total OFPs of 22.6 to 59.6 %.     

燃煤锅炉低温烟气余热利用探讨

针对燃煤锅炉燃烧产生的低温烟气仍具有一定温度的现象,提出通过增设超导热管空气预热器对这部分低温烟气余热加以回收的设想,对锅炉送风进行预热,探讨烟气余热利用可达到的送风温度、节能效果及可能产生的经济效益。     

硫酸锰废渣浸出液对斑马鱼的毒性及抗氧化酶活性的影响

已有研究表明,堆积在湘西花垣河河岸的硫酸锰废渣含有多种重金属,可能是导致花垣河河水和沉积物重金属污染的主要原因.为了评价硫酸锰废渣的潜在生态风险和对水生动物的毒性,本研究分析了硫酸锰废渣浸出液中的主要重金属成分,用漫出液对斑马鱼进行了急性毒性实验,观察在急性胁迫下斑马鱼的体征变化,测定了斑马鱼在亚致死浓度下的生化指标的...     

水环境中石油类物质分析方法探讨

在详述了国内外石油类分析方法的基础上,对各方法的适用范围、优缺点及可比性进行了深入分析,阐述了各类方法存在的共性问题,指出按照石油类物质毒性大小分别定量分析的方法将是未来的发展趋势。     

生物滴滤塔处理氯苯废气的工艺性能

将活性污泥培养及驯化后接种于生物滴滤塔中,挂膜启动后处理模拟氯苯废气（简称氯苯废气）,考察了生物滴滤塔在挂膜启动阶段及稳定运行阶段的性能。实验结果表明：接种41 d后生物滴滤塔成功挂膜,此时氯苯去除率稳定在90%以上;生物滴滤塔稳定运行阶段,随着进气中氯苯质量浓度由303.82 mg/m³逐渐增至1 489.05 mg/m³,氯苯去除率从85.1%降至70.1%。处理氯苯废气适宜的工艺条件为：空塔停留时间超过45 s,喷淋液流量31.8 mL/min,氯苯负荷23.97~128.01 g/（m³·h）。生物滴滤塔对喷淋液的酸性环境有较好的适应性,喷淋液pH的变化对氯苯去除率无显著影响。     

违纪解除劳动合同法律要件分析

王某2006年1月1日与某公司签订了劳动合同,合同期限至2008年1月1日,任该公司部门主管.2007年3月20日，该公司作出了《解除劳动合同通知书》，其内容为：“王某，你与本单位2006年1月1日签订了两年期限的劳动合同，因严重失职、玩忽职守，根据《劳动法》第7条规定，决定从2007年3月20日起解除劳动合同，无经济补偿金。”在王某仍然上班的情况下，该公司将通知书在公告栏内张贴。王某对此处理决定不服，于2007年3月21日申请劳动争议仲裁，请求撤销该处理决定。     

Copper leaching of MSWI bottom ash co-disposed with refuse: Effect of short-term accelerated weathering

Co-disposal of refuse with municipal solid waste incinerator (MSWI) bottom ash (IBA) either multi-layered as landfill cover or mixed with refuse could pose additional risk to the environment because of enhanced leaching of heavy metals, especially Cu. This study applied short-term accelerated weathering to IBA, and monitored the mineralogical and chemical properties of IBA during the weathering process. Cu extractability of the weathered IBA was then evaluated using standard leaching protocols (i.e. SPLP and TCLP) and co-disposal leaching procedure. The results showed that weathering had little or no beneficial effect on Cu leaching in SPLP and TCLP, which can be explained by the adsorption and complexation of Cu with DOM. However, the Cu leaching of weathered IBA was reduced significantly when situated in fresh simulated landfill leachate. This was attributed to weakening Cu complexation with fulvic acid or hydrophilic fractions and/or intensifying Cu absorption to neoformed hydr(oxide) minerals in weathered IBA. The amount of total leaching Cu and Cu in free or labile complex fraction (the fraction with the highest mobility and bio-toxicity) of the 408-h weathered IBA were remarkably decreased by 86.3% and 97.6% in the 15-day co-disposal leaching test. Accelerated weathering of IBA may be an effective pretreatment method to decrease Cu leaching prior to its co-disposal with refuse.     

Penicillin fermentation residue biochar as a high-performance electrode for membrane capacitive deionization

● We have provided an activated method to remove the toxicity of antibiotic residue. ● PFRB can greatly improve the salt adsorption capacity of MCDI. ● The hierarchical porous and abundant O/N-doped played the key role for the high-capacity desalination. ● A new field of reuse of penicillin fermentation residue has been developed. Membrane capacitive deionization (MCDI) is an efficient desalination technology for brine. Penicillin fermentation residue biochar (PFRB) possesses a hierarchical porous and O/N-doped structure which could serve as a high-capacity desalination electrode in the MCDI system. Under optimal conditions (electrode weight, voltage, and concentration) and a carbonization temperature of 700 °C, the maximum salt adsorption capacity of the electrode can reach 26.4 mg/g, which is higher than that of most carbon electrodes. Furthermore, the electrochemical properties of the PFRB electrode were characterized through cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) with a maximum specific capacitance of 212.18 F/g. Finally, biotoxicity tests have showed that PFRB was non-biotoxin against luminescent bacteria and the MCDI system with the PFRB electrode remained stable even after 27 adsorption–desorption cycles. This study provides a novel way to recycle penicillin residue and an electrode that can achieve excellent desalination.