小型燃煤工业锅炉NO_x形成与释放规律模拟研究

NOx是我国十二五期间重点控制的污染物,燃煤工业锅炉是其重要来源。为了研究燃煤工业锅炉NOx的形成与释放规律,在实验室模拟了不同煤种的燃烧过程。采用原煤/焦炭燃烧法分别研究挥发分氮和焦炭氮生成NOx的反应,探讨燃料型NOx的形成与释放规律,并解释试验模拟条件下燃煤NOx产污系数和现场实测值的差异。结果表明,试验中烟煤、无烟煤、煤焦的NO转化率平均值分别为25.77%,22.17%和11.98%,产污系数平均值分别为4.31,5.08和2.00kg/t,高于现场实测结果核算值。燃煤工业锅炉NOx以燃料型为主,燃料型NOx的形成和释放是一个复杂的多相反应过程,由挥发分氮的氧化还原反应和焦炭氮的氧化还原反应组成,煤种、温度、空气流量、粒径、氧含量等因素对4种反应各自影响及影响程度并不相同。     

Ru-Ta/Ti阳极电解深度处理垃圾渗滤液

采用Ru-Ta/Ti三元电极为阳极,以不锈钢电极为阴极对垃圾渗滤液生物处理出水进行了电解处理研究,以COD为控制指标.重点研究了电解电压、电解时间、pH值、曝气量、电解质的添加等因素对电解处理效果的影响.研究结果表明:电压为7 V、处理时间为30 min、pH=9、曝气量为0.04m3/h、添加电解质为MnⅡ的条件下电...     

吸附剂烟气脱砷的研究现状

大气砷污染问题日益引起人们的重视,吸附剂能够在去除烟气中砷的同时去除其他有害气体,是控制烟气砷含量、防止砷污染的有效途径.文章分析了砷在废气中的形态及分布,总结了近年来氧化钙、活性炭、飞灰和金属氧化物作为吸附剂用于烟气脱砷的最新研究进展,重点分析了各自的吸附机理及不同因素对脱砷过程的影响.指出吸附过程通常以化学吸附为主...     

动力与热力抬升对烟气抬升高度的影响分析

通过模式选择和计算,得出烟气抬升高度的增加与动能和热能的关系,表明当烟囱出口处风速分别为3 m/s、2 m/s和1 m/s时欲增加同样大小的烟气抬升高度,需要的动能比热能要高,结论认为烟气的热力提升比动力提升的贡献大。     

基于生态系统的水环境压力分区指标体系构建

为了科学合理的完成水环境压力分区,构建水环境压力分区指标体系是其关键和基础.鉴于水环境压力涉及因素的系统性.相互联系性,从生态系统的角度考虑选取水环境压力分区指标十分必要;由于水环境压力涉及方面的相互联系性,其表征指标之间往往存在信息量的重叠,为了避免信息的重复表达,减少不必要的工作量,同时避免冗余指标带来的干扰,需对...     

化工建设规划生态环境影响评价研究

规划环境影响评价是以可持续发展的思想为出发点,通过调整规划布局或规模从规划源头预防环境污染和生态破坏.文章探讨了化工建设规划的生态环境影响评价理论和方法学体系,并以武汉化工新城为例,对该理论方法体系进行探讨.     

Effects of metal and acidic sites on the reaction by-products of butyl acetate oxidation over palladium-based catalysts

Catalytic oxidation is widely used in pollution control technology to remove volatile organic compounds. In this study, Pd/ZSM-5 catalysts with different Pd contents and acidic sites were prepared via the impregnation method. All the catalysts were characterized by means of N2 adsorption- desorption, X-ray fluorescence （XRF）, HE temperature programmed reduction （H2-TPR）, and NH3 temperature programmed desorption （NH3-TPD）. Their catalytic performance was investigated in the oxidation of butyl acetate experiments. The by-products of the reaction were collected in thermal desorption tubes and identified by gas chromatography/mass spectrometry. It was found that the increase of Pd content slightly changed the catalytic activity of butyl acetate oxidation according to the yield of CO2 achieved at 90%, but decreased the cracking by-products, whereas the enhancement of strong acidity over Pd-based catalysts enriched the by-product species. The butyl acetate oxidation process involves a series of reaction steps including protolysis, dehydrogenation, dehydration, cracking, and isomerization. Generally, butyl acetate was cracked to acetic acid and 2- methylpropene and the latter was an intermediate of the other by-products, and the oxidation routes of typical by-products were proposed. Trace amounts of 3-methylpentane, hexane, 2-methylpentane, pentane, and 2-methylbutane originated from iso4merization and protolysis reactions.     

Arbuscular mycorrhizal fungal phylogenetic groups differ in affecting host plants along heavy metal levels

Arbuscular mycorrhizal fungi（AMF） are important components of soil microbial communities,and play important role in plant growth. However, the effects of AMF phylogenetic groups（Glomeraceae and non-Glomeraceae） on host plant under various heavy metal levels are not clear. Here we conducted a meta-analysis to compare symbiotic relationship between AMF phylogenetic groups（Glomeraceae and non-Glomeraceae） and host plant functional groups（herbs vs. trees, and non-legumes vs. legumes） at three heavy metal levels. In the meta-analysis, we calculate the effect size（ln（RR）） by taking the natural logarithm of the response ratio of inoculated to non-inoculated shoot biomass from each study. We found that the effect size of Glomeraceae increased, but the effect size of non-Glomeraceae decreased under high level of heavy metal compared to low level. According to the effect size, both Glomeraceae and non-Glomeraceae promoted host plant growth, but had different effects under various heavy metal levels. Glomeraceae provided more benefit to host plants than non-Glomeraceae did under heavy metal condition, while non-Glomeraceae provided more benefit to host plants than Glomeraceae did under no heavy metal. AMF phylogenetic groups also differed in promoting plant functional groups under various heavy metal levels.Interacting with Glomeraceae, herbs and legumes grew better than trees and non-legumes did under high heavy metal level, while trees and legumes grew better than herbs and non-legumes did under medium heavy metal level. Interacting with non-Glomeraceae, herbs and legumes grew better than trees and non-legumes did under no heavy metal. We suggested that the combination of legume with Glomeraceae could be a useful way in the remediation of heavy metal polluted environment.     

Antimony smelting process generating solid wastes and dust：Characterization and leaching behaviors

A large amount of solid waste has been produced by the antimony smelting process in the＂World Capital of Antimony＂, Xikuangshan area in China. This study comprehensively investigated the physical and chemical characteristics of the various solid wastes, as well as the leaching behavior of the solid wastes, which included water-quenched slag,arsenic-alkali residue, desulfurized slag and blast furnace dust. These four types of waste were enriched in a variety of heavy metals and metalloids and more specifically with As and Sb levels up to 8.6 × 104 and 3.16 × 105mg/kg, respectively, in arsenic-alkali residue. For desulfurized slag and water-quenched slag, the leaching concentration of Sb significantly exceeded the acceptable limits during the leaching tests using the toxicity characteristic leaching procedure and the synthetic precipitation leaching procedure. In addition, As leaching in arsenic-alkali residue was extraordinarily hazardous, being three orders of magnitude higher than the regulatory level of As. According to the results of the extraction tests, all the tested wastes were classified as hazardous waste.     

Mo-modified Pd/Al2O3 catalysts for benzene catalytic combustion

Mo-modified Pd/Al2O3catalysts were prepared by an impregnation method and tested for the catalytic combustion of benzene. The catalysts were characterized by N2 isothermal adsorption, X-ray diffraction（XRD）, X-ray photoelectron spectroscopy（XPS）, temperatureprogrammed desorption of NH3（NH3-TPD）, H2temperature-programmed reduction（H2-TPR）, and high-angle annular dark-field scanning transmission electron microscopy（HAADF-STEM）. The results showed that the addition of Mo effectively improved the activity and stability of the Pd/Al2O3catalyst by increasing the dispersion of Pd active components, changing the partial oxidation state of palladium and increasing the oxygen species concentration on the surface of catalyst. In the case of the Pd-Mo/Al2O3catalyst,benzene conversion of 90% was obtained at temperatures as low as 190°C, which was 45°C lower than that for similar performance with the Pd/Al2O3catalyst. Moreover, the 1.0% Pd-5% Mo/Al2O3catalyst was more active than the 2.0% Pd/Al2O3catalyst. It was concluded that Pd and Mo have a synergistic effect in benzene catalytic combustion.