Directional Connectivity of Wolf (Canis lupus) Populations in Northwest Spain and Anthropogenic Effects on Dispersal Patterns

In view of the extensive information available on wolf ecology and habitat suitability, and on the fragmentation of wolf populations by motorways and similar infrastructures, a key factor in their conservation, the aim of the present study was to model the directional connectivity of wolf populations in the region of Galicia in northwest Spain, and to quantify anthropogenic effects on wolf dispersal patterns. To this end, we map the probability of wolf movement by means of known relationships between wolf movement and anthropogenic, vegetation and topographic factors. The relative importance of each factor was quantified by sensitivity analyses. Three types of cost surface were constructed: (a) isotropic surfaces, (b) anisotropic cost surfaces taking into account terrain slope effects in the movement, and (c) surfaces obtained by combining the isotropic and anisotropic surfaces. The results obtained by approaches (a) and (c) indicate that one of the region’s motorways (the AP-9) probably acts as a significant barrier to wolf movement, possibly isolating two subpopulations, while the remaining motorways probably do not have major effects on dispersal. Estimation of lowest-cost routes for wolf displacement allowed identification of areas critical for connectivity, in which it would be of interest to perform detailed studies with more precise input data on motorway course and the location of drainage channels and underpasses, etc. (these being the factors identified by sensitivity analysis to be those with the most marked effects on the cost surfaces). The visualization of connectivity enabled by this approach will allow wolf management and conservation efforts to be focused on critical areas: such efforts might include measures aimed to encourage wolf dispersal through areas in which conflict with human activity is minimized, thus contributing positively to the management of a socially conflictive species. Finally, evaluation of the different cost surfaces suggests that it would be of interest to introduce two modifications to the anisotropic algorithm, to allow the user to weigh the importance of the different input factors, and to allow the inclusion of more than one anisotropic factor in the model.     

Sedimentation basin performance at highway construction sites

Sedimentation basins (SBs) are commonly used during highway construction for erosion and sedimentation pollution control as well as for attenuation of overland storm waters. In order to evaluate the sediment removal capacity of these SBs, four basins were selected for monitoring from a new highway construction that extends I-99 to I-80, in Pennsylvania. Between September 2004 and August 2005, ten sampling trips were conducted during which basin inlet and outlet water samples were obtained. The SB samples were analyzed for pH, color, turbidity, total suspended solids (TSS), volatile suspended solids (VSS), total and dissolved iron, magnesium, manganese, aluminum, calcium, sulfate and phosphate. The data showed peaks in concentrations of TSS, total aluminum, total manganese, total iron and total phosphate that closely correlated to localized rainfall peaks. For certain samples, the concentration of TSS in the outlet was higher than the TSS concentration at the basin inlet, suggesting sediment re-suspension. In general SBs managed high flows during wet weather events, but were not effective in capturing particulates. This paper discusses the need for Best Management Practices (BMPs) for the design of SBs that reflect contemporary concerns for management of particle removal and to control the release of particulate-bound metals. This paper also evaluates the water quality impacts of naturally occurring acidic drainages into SBs, as several acidic seeps with pH in the range of 5-6 and having high dissolved concentrations of metals (Fe, Mn, Mg and Ca), sulfate and phosphate were observed draining into the SBs.     

Occupational health and safety in the framework of corporate social responsibility

Corporate Social Responsibility (CSR) has been defined as the voluntary integration of social and environmental concerns into the firm’s decision-making. The search for a good Occupational Health and Safety (OHS) environment and the promotion of a culture of risk prevention are two of the firm’s main social responsibilities, and consequently an integral part of CSR. This paper discusses how the growing interest in corporate social responsibility can contribute to improving the implementation of adequate systems of prevention. For this purpose, we study to what extent OHS issues are present in the field of CSR, and consequently determine which aspects have received the most attention, and which are less well developed; we offer some proposals as well. The methodology followed is a content analysis of the main international CSR management tools.     

Effects of meteorology on diurnal and nocturnal levels of priority polycyclic aromatic hydrocarbons and elemental and organic carbon in PM10 at a source and a receptor area in Mexico City

PM₁₀ levels of the 16 US-EPA Priority Pollutant polycyclic aromatic hydrocarbons (PAHs) were measured from March 17 to 31, 2003, in 8-h time bins (morning, afternoon and nighttime) at Merced, a source site dominated by vehicular traffic emissions near the center of Mexico City, and at Pedregal, a receptor area located downwind in a residential area of low traffic. Along with PAH, elemental (EC) and organic carbon (OC), mass, and prevailing meteorological parameters were measured. At the source location, measured concentrations of benzo[a]pyrene (BAP), an agent suspected of being carcinogenic to humans and of causing oxidative DNA damage, reached concentrations as high as 2.04 and 2.11 ng m^?3 during the morning of a weekday and the night period of a holiday. Compared with source dominated areas in Central Los Angeles, the BAP levels found in Central Mexico City are approximately 6 times higher. Benzo[ghi]perylene (BGP) levels were, in general, the highest among the target PAH, both at the source (7.2 ng m^?3) and the receptor site (2.8 ng m^?3), suggesting that, at both locations, exhaust emission by light-duty (LD) vehicles is an important contributor to the atmospheric PAH burden. Higher PAH concentrations were observed during the morning period (5:00–13:00 h) at the source and the receptor site. The concentrations of PAHs found predominantly in the particle-phase (MW > 202) correlated well (r = 0.57–0.71) with the occurrence of surface thermal inversions and with mixing heights (r = ?0.57 to ?0.72). Organic and elemental carbon ratios also indicated that Pedregal is impacted by secondary aerosols during the afternoon hours.     

Blood Pb and δ-ALAD inhibition in cattle and sheep from a Pb-polluted mining area

The effects of Pb pollution on cattle and sheep raised in an ancient mining area were studied through the use of blood Pb (PbB) levels and δ-aminolevulinic acid dehydratase (δ-ALAD) activity. Lead levels in livestock blood from the mining area (n=110) were significantly elevated when compared to the controls (n=79). In 91.4% of cattle (n=58) and 13.5% of sheep (n=52) sampled in the mining area, PbB levels corresponded to subclinical exposure (6-35 μg/dl). Two young cattle (<2 years) from the mining area (n=5) had PbB levels indicative of clinical poisoning (>35 μg/dl). Elevated PbB was also accompanied by δ-ALAD activity inhibition in blood, which confirms that measurable effects of Pb poisoning were taking place. Observed PbB levels suggest that a potential risk to human consumers of beef from the Pb polluted areas may also exist, as has been shown previously for game meat from the same mining area.     

Cytotoxic and genotoxic effects of metal(oid)s bioactivated in rocket leaves (Eruca vesicaria subsp. sativa Miller)

Rocket is an important source of essential elements. However, it may also accumulate toxic elements such as metal(oids). The objectives of the present work were (i) to study the uptake of arsenic, lead, cadmium and zinc in rocket grown in contaminated soils, (ii) to establish the genotoxic and cytotoxic activities of this vegetable material, and (iii) to study the modulator role of the glucosinolate and metal contents in the genotoxic/cytotoxic activities. Lead, cadmium and zinc leaf concentrations in our study were over the concentrations allowed by the statutory limit set for metal(oid) contents in vegetables. The accessions were non genotoxic at the different concentrations studied, although one of the accessions showed the highest mutation rates doubling those of negative control. The cytotoxicity assays with HL60 human leukaemia cells showed that the tumouricide activities of rocket leaves decreased with the increasing of metal(oid) concentrations and also with the decreasing of glucosinolate concentrations in their tissues. An interaction between metal(oid)s and glucosinolate degradation products contained in rocket leaves is suggested as the main modulator agents of the biological activity of the plants grown in metal-contaminated soils.     

The use of olive-mill waste compost to promote the plant vegetation cover in a trace-element-contaminated soil

The applicability of a mature compost as a soil amendment to promote the growth of native species for the phytorestoration of a mine-affected soil from a semi-arid area (SE Spain), contaminated with trace elements (As, Cd, Cu, Mn, Pb and Zn), was evaluated in a 2-year field experiment. The effects of an inorganic fertiliser were also determined for comparison. Bituminaria bituminosa was the selected native plant since it is a leguminous species adapted to the particular local pedoclimatic conditions. Compost addition increased total organic-C concentrations in soil with respect to the control and fertiliser treatments, maintained elevated available P concentrations throughout the duration of the experiment and stimulated soil microbial biomass, while trace elements extractability in the soil was rather low due to the calcareous nature of the soil and almost unaltered in the different treatments. Tissue concentrations of P and K in B. bituminosa increased after the addition of compost, associated with growth stimulation. Leaf Cu concentration was also increased by the amendments, although overall the trace elements concentrations can be considered non-toxic. In addition, the spontaneous colonisation of the plots by a total of 29 species of 15 different families at the end of the experiment produced a greater vegetation cover, especially in plots amended with compost. Therefore, the use of compost as a soil amendment appears to be useful for the promotion of a vegetation cover and the phytostabilisation of moderately contaminated soils under semi-arid conditions.     

Marine sponges with contrasting life histories can be complementary biomonitors of heavy metal pollution in coastal ecosystems

In this study, we compared the usefulness of a long-living sponge (Hymeniacidon heliophila, Class Demospongiae) and a short-living one (Paraleucilla magna, Class Calcarea) as biomonitors of metallic pollution. The concentrations of 16 heavy metals were analyzed in both species along a gradient of decreasing pollution from the heavily polluted Guanabara Bay to the less impacted coastal islands in Rio de Janeiro, SE Brazil (SW Atlantic). The levels of most elements analyzed were higher in H. heliophila (Al, Co, Cr, Cu, Fe, Mn, Ni, Hg, Ni, and Sn) and P. magna (Ni, Cu, Mn, Al, Ti, Fe, Pb, Co, Cr, Zn, and V) collected from the heavily polluted bay when compared with the cleanest sites. Hymeniacidon heliophila accumulates 11 elements more efficiently than P. magna. This difference may be related to their skeleton composition, histological organization, symbiont bacteria and especially to their life cycle. Both species can be used as a biomonitors of metallic pollution, but while Hymeniacidon heliophila was more effective in concentrating most metals, Paraleucilla magna is more indicated to detect recent pollutant discharges due to its shorter life cycle. We suggest that the complementary use of species with contrasting life histories can be an effective monitoring strategy of heavy metals in coastal environments.     

Multivariant statistical analysis of PCDD/FS in sewage sludges from different areas of the Valencian Community (Spain)

The levels of polychlorinated dibenzo-p-dioxins (PCDDs) and dibenzofurans (PCDFs) in 31 sewage sludges from different wastewater treatment plants corresponding to rural, urban and industrial areas in the Valencian Community (Spain) were analysed. Values of 5.1-346.2 ng I-TEQ kg(-1) (dry weight) were detected for sewage sludge with the highest value in one sample from an industrial area. Therefore the majority of the samples did not exceed the limit proposed (100 ng I-TEQ kg(-1)) by the [EU, 2000. Working document on sludge, 3rd draft. Brussels. Available from: http://europa.eu.int/comm/environment/waste/sludge/sludge_en.pdf] for use in agriculture. The dominant congeners for each family of compounds were 1,2,3,4,6,7,8-HpCDD and OCDD from PCDDs, and 1,2,3,4,6,7,8-HpCDF and OCDF from PCDFs. The total concentrations of PCDD/Fs were evaluated statistically through SPPS 11.0 for Windows. The principal component analysis (PCA) was used to extract two PCs as a linear combination of the original variables, one of them associated to urban+highly industrial areas and the other one to urban+low industrial areas. The linear regression method was applied and an efficient correlation was obtained between the total I-TEQ values for each sample and two of most abundant congeners (OCDF and OCDD). This expression was obtained with the results of the 31 samples analysed and a variety of data from other authors. Furthermore, several bilateral correlations between the different congeners completed the statistical analysis.