Estimation of radon exhalation rate, natural radioactivity and radiation doses in fly ash samples from Durgapur thermal power plant, West Bengal, India

Coal and its by products often contain significant amounts of radionuclides, including uranium which is the ultimate source of the radioactive gas radon. Burning of coal and the subsequent emission to the atmosphere cause the re-distribution of toxic trace elements in the environment. Due to considerable economic and environmental importance and diverse uses, the collected fly ash has become a subject of worldwide interest in recent years. In the present study, radon exhalation rate and the activity concentration of (238)U, (232)Th and (40)K radionuclides in fly ash samples from Durgapur thermal power plant (WB) have been measured by "Sealed Can technique" using LR-115 type II detectors and a low level NaI (Tl) based gamma ray spectrometer, respectively. Radon exhalation rate varied from 360.0 to 470.0 mBq m(-2)h(-1) with an average value of 406.8 mBq m(-2)h(-1). Activity concentrations of (238)U ranged from 84.8 to 126.4 Bq kg(-1) with an average value of 99.3Bqkg(-1), (232)Th ranged from 98.1 to 140.5 Bq kg(-1) with an average value of 112.9 Bq kg(-1) and (40)K ranged from 267.1 to 364.9 Bq kg(-1) with an average value of 308.9 Bq kg(-1). Radium equivalent activity obtained from activity concentrations is found to vary from 256.5 to 352.8 Bq kg(-1) with an average value of 282.5 Bq kg(-1). Absorbed gamma dose rates due to the presence of (238)U, (232)Th and (40)K in fly ash samples vary in the range 115.3-158.5 nGy h(-1) with an average value of 126.4 nGy h(-1). While the external annual effective dose rate varies from 0.14 to 0.19 mSv y(-1) with an average value of 0.15 mSv y(-1), effective dose equivalent estimated from exhalation rate varies from 42.5 to 55.2 microSv y(-1) with an average value of 47.8 microSv y(-1). Values of external hazard index H(ex) for the fly ash samples studied in this work range from 0.69 to 0.96 with a mean value of 0.77.     

Influence of acetic acid soaking and mechanical grinding treatment on the properties of treated recycled aggregate concrete

Journal of Material Cycles and Waste Management - The utilization of recycled aggregate (RA) extracted from construction and demolition (C&D) waste contributes to reducing the usage of...     

Linear stability of sand waves sheared by a turbulent flow

Environmental Fluid Mechanics - In this paper, the linear stability of sand waves sheared by a turbulent flow is analyzed. The velocity distribution in the streamwise direction is considered to...     

Impact of river flow modification on wetland hydrological and morphological characters

A good number of researchers investigated the impact of flow modification on hydrological, ecological, and geomorphological conditions in a river. A few works also focused on hydrological modification on wetland with some parameters but as far the knowledge is concerned, linking river flow modification to wetland hydrological and morphological transformation following an integrated modeling approach is often lacking. The current study aimed to explore the degree of hydrological alteration in the river and its effect on downstream riparian wetlands by adopting advanced modeling approaches. After damming, maximally 67 to 95% hydrological alteration was recorded for maximum, minimum, and average discharges. Wavelet transformation analysis figured out a strong power spectrum after 2012 (damming year). Due to attenuation of flow, the active inundation area was reduced by 66.2%. After damming, 524.03 km² (48.9% of total pre-dam wetland) was completely obliterated. Hydrological strength (HS) modeling also reported areas under high HS declined by 14% after post-dam condition. Wetland hydrological security state (WSS) and HS matrix, a new approach, are used to explore wetland characteristics of inundation connectivity and hydrological security state. WSS was defined based on lateral hydrological connectivity. HS under critical and stress WWS zones deteriorated in the post-dam period. The morphological transformation was also well recognized showing an increase in area under the patch, edge, and a decrease in the area under the large core area. All these findings established a clear linkage between river flow modification and wetland transformation, and they provided a good clue for managing wetlands.

     

Strong variability in bacterioplankton abundance and production in central and western Bay of Bengal

With large influx of freshwater that decreases sea-surface salinities, weak wind forcing of <10 m s⁻¹ and almost always warm (>28°C) sea-surface temperature that stratifies and shallows the mixed layer leading to low or no nutrient injections into the surface, primary production in Bay of Bengal is reportedly low. As a consequence, the Bay of Bengal is considered as a region of low biological productivity. Along with many biological parameters, bacterioplankton abundance and production were measured in the Bay of Bengal during post monsoon (September–October 2002) along an open ocean transect, in the central Bay (CB, 88°E) and the other transect in the western Bay (WB). The latter representing the coastal influenced shelf/slope waters. Bacterioplankton abundances (<2 × 10⁹cells l⁻¹) were similar to those reported from the HNLC equatorial Pacific and the highly productive northern Arabian Sea. Yet, the thymidine uptake rates along CB (average of 1.46 pM h⁻¹) and WB (average of 1.40 pM h⁻¹) were less than those from the northwestern Indian Ocean. These abundances and uptake rates were higher than those in the oligotrophic northwestern Sargasso Sea (<7 × 10⁸ cells l⁻¹; av 1.0 pM h⁻¹). Concentrations of chlorophyll a (chl a), primary production rates and total organic carbon (TOC) were also measured for a comparison of heterotrophic and autotrophic production. In the WB, bacterioplankton carbon biomass equaled ∼ 95% of chl a carbon than just 31% in the CB. Average bacterial:primary production (BP:PP) ratios accounted for 29% in the CB and 31% in the WB. This is mainly due to lower primary productivity (PP) in the WB (281 mg C m⁻² d⁻¹) than in the CB (306 mg C m⁻² day⁻¹). This study indicates that bacteria–phytoplankton relationship differs in the open (CB) and coastal waters (WB). Higher abundance and contrastingly low bacterial production (BP) in WB may be because of the riverine bacteria, brought in through discharges, becoming dormant and unable to reproduce in salinities of 28 or more psu. Heterotrophic bacteria appear to utilize in situ DOC rather rapidly and their carbon demand is ∼50% of daily primary production. It is also apparent that allochthonous organic matter, in particular in the western Bay, is important for meeting their carbon demand.     

Determination of hierarchical relationships among sustainable development goals using interpretive structural modeling

This paper analyses the complex interactions among the seventeen sustainable development goals (SDGs) and presents them in a hierarchical framework using interpretive structural modeling technique. The driving and dependence powers of each of these goals have been ascertained to help the developing and least developed countries improve their strategic orientation for a particular goal within a given time frame. This would also help them in prioritizing their resource allocations on a specific SDG by focusing on its hierarchical ranking on one hand and driving and dependence powers on the other.     

Remanufacturing for the automotive aftermarket-strategic factors: literature review and future research needs

While the concepts of remanufacturing and reverse logistics are gaining popularity in practice, the available literature and theory on strategic decision making in these areas are limited. This paper is designed to address this gap, in particular, for the automotive industry aftermarket. In doing so, the authors reviewed literature pertaining to: customer demand(s), product design and development, cost-benefit analysis of reman, core (i.e., used product) supply management, reman competencies and skills, product life cycle strategies, reman and reverse logistics network design, relationships among key stakeholders, environmental considerations, regulations, and impact of emerging economies. The literature findings along with our experience in working with automotive reman products were used as inputs to guide the formulation of seven major propositions for the strategic factors in decision making within reman. The propositions were then tested through a case study. The case study reconfirmed many of the factors like product life cycle, regulations, etc. from the literature review and also identified new factors like OE customer requirements. Our results provide a foundation for further research for companies that deal with Original Equipment (OE) Sales, Original Equipment Service (OES), as well as Independent Aftermarket (IAM) business in the automotive industry.     

Study on removal of silver and polyethylene terephthalate from exposed radiography films using enzyme protease

Journal of Material Cycles and Waste Management - In the proposed method, crude enzymes extracted from waste dry leaves of 15 different plants showing protease activity were used for removal of...     

MSW stabilization in an anaerobic bioreactor landfill and evaluation of in-situ leachate treatment potential with the help of quadric model

Journal of Material Cycles and Waste Management - Recirculation of the leachate using bioreactor technology for in-situ treatment of leachate is an efficient method for reducing the contaminants...     

Value addition of vegetable wastes by solid-state fermentation using Aspergillus niger for use in aquafeed industry

Vegetable waste typically has high moisture content and high levels of protein, vitamins and minerals. Its value as an agricultural feed can be enhanced through solid-state fermentation (SSF). Two experiments were conducted to evaluate the nutritional status of the products derived by SSF of a mixture of dried vegetable waste powder and oil cake mixture (soybean flour, wheat flour, groundnut oil cake and sesame oil cake at 4:3:2:1 ratio) using fungi Aspergillus niger S₁4, a mangrove isolate, and A. niger NCIM 616. Fermentation was carried out for 9 days at 35% moisture level and neutral pH. Significant (p < 0.05) increase in crude protein and amino acids were obtained in both the trials. The crude fat and crude fibre content showed significant reduction at the end of fermentation. Nitrogen free extract (NFE) showed a gradual decrease during the fermentation process. The results of the study suggest that the fermented product obtained on days 6 and 9 in case of A. niger S₁4 and A. niger NCIM 616 respectively contained the highest levels of crude protein.