Adsorption–desorption of metolachlor and atrazine in Indian soils: effect of fly ash amendment

The effect of two fly ashes as soil amendment on the adsorption–desorption of metolachlor [2-chloro-N-(2-ethyl-6-methylphenyl)-N-(2-methoxy-1-methylphenyl)] and atrazine (2-chloro-4-ethylamino-6-isopropylamino-1,3,5-triazine) was studied in alluvial and laterite soils. The adsorption data for both the herbicides fitted well the Freundlich equation, and Freundlich adsorption coefficient (K _f) increased with an increase of fly ash amount. Both the fly ashes differed in their extent to increase herbicide sorption, and the effect was different in different soils. Atrazine was sorbed more in the soils/soils?+?fly ash mixtures than the metolachlor. The K _f values showed significant correlation with the amount of fly ash amendment (correlation coefficient, R?>?0.982). The desorption isotherms also fitted the Freundlich equation, and desorption showed hysteresis which increased with an increase in the content of fly ash amendment. The free energy change (ΔG) indicated that the sorption process is exothermic, spontaneous, and physical in nature. The study has shown that fly ash as soil amendment significantly increased the sorption of metolachlor and atrazine, but the effect is soil- and fly ash-specific.     

Ambient nitrogen oxides exposure and early childhood respiratory illnesses

Acute respiratory infections are common in children below 5 years and recent studies suggest a possible link with air pollution. In this study, we investigated the association between ambient nitrogen oxides (NO_x) and bronchitis or upper airway inflammation.This longitudinal study was conducted in Teplice and Prachatice districts, Czech Republic. Children were followed from birth to 4.5 years of age. Data were compiled from medical records at delivery and at follow up, and from self-administered questionnaires from the same two time points. Air pollution monitoring data were used to estimate exposure over five different averaging periods ranging from three to 45 days prior to an episode. To quantify the association between exposure and outcome, while accounting for repeated measure correlation we conducted logistic regression analysis using generalized estimating equations.During the first 2 years of life, the adjusted rate ratio for bronchitis associated with interquartile increase in the 30-day average NO_x was 1.31 [95% confidence interval (CI): 1.07, 1.61] and for two to 4.5 year olds, it was 1.23 (95% CI: 1.01, 1.49). The 14-day exposure also had stable association across both age groups: below 2 years it was 1.25 (95% CI: 1.06, 1.47) and for two to 4.5 years it was 1.21 (95% CI: 1.06, 1.39). The association between bronchitis and NO_x increased with child's age in the under 2 years group, which is a relatively novel finding.The results demonstrate an association between NO_x and respiratory infections that are sufficiently severe to come to medical attention. The evidence, if causal, can be of public health concern because acute respiratory illnesses are common in preschool children.     

Natural gas engine driven heat pump system – a case study of an office building

ABSTRACT

An eQUEST model was developed to conduct a simulation study of a natural gas engine-driven heat pump (GEHP) for an office building in Woodstock, Ontario, Canada. Prior to the installation of the GEHP, the heating and cooling demands of the office building were provided by rooftop units (RTUs), comprising of natural gas heater and electric air conditioner. Energy consumption for both GEHP and RTUs were monitored for operation in alternating months. These recorded energy consumptions along with weather data were used in the regression analysis. The developed eQUEST models were validated and calibrated with the regression analysis results with respect to the ASHRAE Guideline 14–2014. The eventual models were then applied to investigate the potential annual energy consumption, greenhouse gas (GHG) emission and energy cost savings achieved by using the GEHP in Woodstock, and other cities in Canada, particularly in Ontario.     

Development of a microscale emission factor model for particulate matter for predicting real-time motor vehicle emissions

The U.S. Environmental Protection Agency's National Exposure Research Laboratory is pursuing a project to improve the methodology for modeling human exposure to motor vehicle emissions. The overall project goal is to develop improved methods for modeling the source through the air pathway to human exposure in significant exposure microenvironments. Current particulate matter (PM) emission models, particle emission factor model (used in the United States, except California) and motor vehicle emission factor model (used in California only), are suitable only for county-scale modeling and emission inventories. There is a need to develop a site-specific real-time emission factor model for PM emissions to support human exposure studies near roadways. A microscale emission factor model for predicting site-specific real-time motor vehicle PM (MicroFacPM) emissions for total suspended PM, PM less than 10 microm aerodynamic diameter, and PM less than 2.5 microm aerodynamic diameter has been developed. The algorithm used to calculate emission factors in MicroFacPM is disaggregated, and emission factors are calculated from a real-time fleet, rather than from a fleet-wide average estimated by a vehicle-miles-traveled weighting of the emission factors for different vehicle classes. MicroFacPM requires input information necessary to characterize the site-specific real-time fleet being modeled. Other variables required include average vehicle speed, time and day of the year, ambient temperature, and relative humidity.     

GIS-based impact assessment and spatial distribution of air and water pollutants in mining area

Environmental Science and Pollution Research - Mining is a significant part of the transforming economy, which is generally considered as essential as well as social evil at the same time. It is...     

Spatial and temporal variations of PM(2.5) concentration and composition throughout an urban area with high freeway density-the Greater Cincinnati study

The PM(2.5) concentration and its elemental composition were measured in the Cincinnati metropolitan area, which is characterized by intense highway traffic. The spatial and temporal variations were investigated for various chemical elements that contributed to the PM(2.5) fraction during a 1-year-long measurement campaign (December 2001-November 2002). The ambient aerosol monitoring was performed in 11 locations around the city during nine measurement cycles. During each cycle, four Harvard-type impactors were operating in parallel in specific locations to explore various factors affecting the PM(2.5) elemental concentrations. The sampling was performed during business days, thus assuring traffic uniformity. The 24-h PM(2.5) samples were collected on Teflon and quartz filters. Teflon filters were analyzed by X-ray fluorescence (XRF) analysis while quartz filters were analyzed by thermal-optical transmittance (TOT) analysis. In addition to PM(2.5) measurements, particle size-selective sampling was performed in two cycles using micro-orifice uniform deposit impactor; the collected fractionated deposits were analyzed by XRF. It was found that PM(2.5) concentration ranged from 6.70 to 48.3 mug m(-3) and had low spatial variation (median coefficient of variation, CV=11.3%). The elemental concentrations demonstrated high spatial variation, with the median CV ranged from 38.2% for Fe to 68.7% for Ni. For traffic-related trace metals, the highest concentration was detected in the city center site, which was close to a major highway. The particle size selective measurement revealed that mass concentration of the trace metals, such as Zn, Pb, Ni, as well as that of sulfur reach their peak values in the particle size range of 0.32-1.0 mum. Meteorological parameters and traffic intensity were not found to have a significant influence on the PM(2.5) elemental concentrations.     

Sampling over time: developing a cost effective and precise exposure assessment program

Studies requiring ambient exposure assessments invariably ask: How often should measurements be taken? Answer to such questions is dictated by budgetary considerations as well as spatial and temporal variability in the data. For example, do we obtain measurements during all seasons, all months within seasons, weeks within months and days within weeks? On one hand, we can obtain a one-time snapshot sample and regard it as representing the "true" mean exposure. On the other hand, we may obtain a large number of measurements over time and then average these in order to represent this "true" mean exposure. The former estimate is the least expensive but may also be the least precise while the latter, may be very precise but prohibitively costly. In this paper, we demonstrate how a pilot study can be undertaken with a potentially promising and feasible sampling plan for the full-scale study. By applying the statistical methodology of variance component analysis (VCA) to the pilot study data and exploiting mathematical relationship between the variance of the overall mean exposure and posited variance components, we can develop a sampling design with decreased sampling costs and/or increased precision of the mean exposure. Our approach was applied to determine sampling design choices for an on-going study that aimed at assessing ambient particulate matter exposure. We conclude that a pilot study followed by the VCA analysis may often lead to sampling design choices that offer considerable cost savings and, at the same time, promise to provide relatively precise estimates of the mean exposure for the subsequent full-scale study.     

Calibration and Validation of Far Field Dilution Models for Outfall at Worli, Mumbai

The city of Mumbai, India with a population of 15 million discharges about 2225 MLD of domestic wastewater after partial treatment to adjoining marine water body. Under the Mumbai Sewage Disposal Project Scheme, sewage is being disposed to the west coast at Worli and Bandra through 3.4 kms long submarine outfalls. A field study was conducted at recently commissioned outfall diffuser location at Worli, at the onset of neap flood tide to study the dispersion patterns and measure the far field dilutions using radio and dye tracers. Estimated dilutions using different tracers were compared with outputs from an empirical model (Brooks) and a 2D numerical model (DIVAST). Validation using parameters such as BOD and FC, indicated a good match for BOD in near field compared to FC. The radiotracer ⁸²Br and Rhodamine WT generally gave good correlation with Brooks' and DIVAST models for nearfield, however at further distances predictions were not accurate.     

Statistical evaluation of hydrobiological parameters of Narmada River water at Hoshangabad City, India

Narmada is considered to be the lifeline of the state of Madhya Pradesh in Central India. The Narmada water is used for bathing, drinking, irrigation and industrial purposes. The city sewage and industrial effluent from Security paper mill at Hoshangabad drains in the Narmada River and pollutes the water quality. Urban sewage enters into Narmada through main nallas. River water quality at Hoshangabad has become a matter of concern due to continuous changing environment and increasing social and industrial activity that influence the water quality directly or indirectly. The present investigation is undertaken to study the effect of domestic sewage and effluent from Security paper Mill on the water quality and ecology of river Narmada at Hoshangabad. The study is carried on at four sites along with the bank of river Narmada. Water samples from four stations were collected, out of which three main sewage mixing points of the city and one fresh water site are taken into account. The samples collected were analyzed, as per standard methods parameters such as Temperature, pH, were measured in-situ. The statistical evaluations were also made. The result showed increase in BOD, Nitrates, Phosphates and Total Coliforms, No. of phytoplanktons. The results revealed that most of the water samples were below or out of limited; according to the WHO, BIS standards.     

Indicator based approach for monitoring natural resources of village ecosystems: findings from select ecosystems of southern India

Indian village ecosystems are diverse with respect to population pressures, agricultural activities and production, livestock composition, energy sources, economics and infrastructural capabilities. Natural resource degradation is a major global concern and the factors and processes leading to degradation are regional and scale up from the micro levels such as village ecosystems. There is need for integrated multidisciplinary approaches for monitoring the resource status and environmental issues at the decentralized level. This paper presents an approach to assess village ecosystems using a set of key indicators developed and tested across fourteen diverse village ecosystems of the Southern India. The concept of ecosystem services associated with village ecosystems of India has been described and adopted to identify indicators and assess issues and trends. Comparison across villages has been demonstrated and the indicators successfully reflected the key environmental issues at each village level as well as differences across villages. We also report unique cases of stabilized land use and ‘desakota-like’ trends from village ecosystem studied.