Bioavailability, ecotoxicity, and geological characteristics of trace lead in sediments from two sites on Negro River, Uruguay, South America

Bioassays of two sites along the Rio Negro in Uruguay indicate ecotoxicity, which could be attributable to trace concentrations of lead in river sediments. Monthly samples at two sites at Baygorria and Bonete locations were analyzed for both particle size and lead. Lead was determined by atomic spectrometry in river water and sediment and particle size by sieving and sedimentation. Data showed that Baygorria's sediments have greater percentage of clay than Bonete's (20.4 and 5.8%, respectively). Lead was measurable in Baygorria's sediments, meanwhile in Bonete's, it was always below the detection limit. In water samples, lead was below detection limit at both sites. Bioassays using sub-lethal growth and survival test with Hyalella curvispina amphipod, screening with bioluminescent bacteria Photobacterium leiognathi, and acute toxicity bioassay with Pimephales promelas fish indicated toxicity at Baygorria, with much less effect at Bonete. Even though no lethal effects could be demonstrated, higher sub-lethal toxicity was found in samples from Baygorria site, showing a possible concentration of the contaminant in the clay fraction.     

Short- and long-term importance of small sharks in the diet of the rare deep-sea shark Dalatias licha

Knowing the trophic ecology of marine predators is essential to develop an understanding of their ecological role in ecosystems. Research conducted on deep-sea and threatened shark species is limited. Here, by combining analyses of individual stomach contents and stable isotope values, we examined the trophic ecology (dietary composition and trophic position) of the kitefin shark Dalatias licha, a deep-sea shark considered as near threatened globally and as data deficient in the Mediterranean Sea. Results revealed the importance of small sharks in the diet of the kitefin shark at short- and long-term scales, although fin-fish, crustaceans and cephalopods were also found. Predation on sharks reveals the high trophic position of the kitefin shark within the food web of the western Mediterranean Sea. Stable isotope values from liver and muscle tissues confirmed our results from stomach content analysis and the high trophic position.     

A complete mass balance of a complex combined anaerobic/aerobic municipal source-separated waste treatment plant

In this study a combined anaerobic/aerobic full-scale treatment plant designed for the treatment of the source-separated organic fraction of municipal solid waste (OFMSW) was monitored over a period of one year. During this period, full information was collected about the waste input material, the biogas production, the main rejects and the compost characteristics. The plant includes mechanical pre-treatment, dry thermophilic anaerobic digestion, tunnel composting system and a curing phase to produce compost. To perform the monitoring of the entire plant and the individual steps, traditional chemical methods were used but they present important limitations in determining the critical points and the efficiency of the stabilization of the organic matter. Respiration indices (dynamic and cumulative) allowed for the quantitative calculation of the efficiency of each treatment unit. The mass balance was calculated and expressed in terms of Mgy(-1) of wet (total) matter, carbon, nitrogen and phosphorus. Results show that during the pre-treatment step about 32% of the initial wet matter is rejected without any treatment. This also reduces the biodegradability of the organic matter that continues to the treatment process. About 50% of the initial nitrogen and 86.4% of the initial phosphorus are found in the final compost. The final compost also achieves a high level of stabilization with a dynamic respiration index of 0.3±0.1g O(2) per kg of total solids per hour, which implies a reduction of 93% from that of the raw OFMSW, without considering the losses of biodegradable organic matter in the refuse (32% of the total input). The anaerobic digestion process is the main contributor to this stabilization.     

Photocatalytic elimination of indoor air biological and chemical pollution in realistic conditions

The photocatalytic elimination of microorganisms from indoor air in realistic conditions and the feasibility of simultaneous elimination of chemical contaminants have been studied at laboratory scale. Transparent polymeric monoliths have been coated with sol-gel TiO(2) films and used as photocatalyst to treat real indoor air in a laboratory-scale single-step annular photocatalytic reactor. The analytical techniques used to characterize the air quality and analyze the results of the photocatalytic tests were: colony counting, microscopy and PCR with subsequent sequencing for microbial quantification and identification; automated thermal desorption coupled to gas chromatography with mass spectrometry detection for chemical analysis. The first experiments performed proved that photocatalysis based on UVA-irradiated TiO(2) for the reduction of the concentration of bacteria in the air could compete with the conventional photolytic treatment with UVC radiation, more expensive and hazardous. Simultaneously to the disinfection, the concentration of volatile organic compounds was greatly reduced, which adds value to this technology for real applications. The fungal colony number was not apparently modified.     

Distribution of polychlorinated biphenyls in both products and by-products of a mussel shell incinerator facility

Purpose  

Solid waste incineration has recently attracted much attention because the combustion process involved produces highly toxic organohalogen contaminants such as dioxin-like polychlorinated biphenyls (DL-PCBs) present in fly ash. This has raised the need for simple, rapid, accurate methods for monitoring PCBs in ash samples.     

Assessment of human exposure to benzene through foods from the Belgian market

Benzene is a volatile organic compound known to be carcinogenic to humans (Group 1) and may be present in food. In the present study, 455 food samples from the Belgian market were analyzed for benzene contents and some possible sources of its occurrence in the foodstuffs were evaluated. Benzene was found above the level of detection in 58% of analyzed samples with the highest contents found in processed foods such as smoked and canned fish, and foods which contained these as ingredients (up to 76.21 μg kg⁻¹). Unprocessed foods such as raw meat, fish, and eggs contained much lower concentrations of benzene. Using the benzene concentrations in food, a quantitative dietary exposure assessment of benzene intake was conducted on a national representative sample of the Belgian population over 15 years of age. The mean benzene intake for all foods was 0.020 μg kg bw d⁻¹ according to a probabilistic analysis. These values are below the minimum risk level for oral chronic exposure to benzene (0.5 μg kg bw d⁻¹).     

Bioconversion of wastes from olive oil industries by vermicomposting process using the epigeic earthworm Eisenia andrei

The present work evaluates the possible bioconversion of wet olive cake by low-cost biostabilization (vermicomposting process). Wet olive cake fresh (WOC), precomposted (WOCP), or mixed with biosolids (WOCB), were vermicomposted for 6 months to obtain organic amendments for agricultural and remediation purposes. The results showed initial differences depending on previous treatment. WOCP was initially more stable, presented a low C:N ratio, and showed more dehydrogenase and urease activity. By contrast, there was no dehydrogenase activity initially in WOC and WOCB, due to the presence of some different types of polyphenols. Finally, the end product showed relatively higher amounts of total nitrogen and humic acid and met the standard of quality for composts and vermicomposts for use both in conventional and organic agriculture and soil-restoration programs.     

Spatial modeling of factor analysis scores

The use of mosses as biomonitors operates as an indicator of their concentration in the environment, becoming a methodology which provides a significant interpretation in terms of environmental quality. The different types of pollution are variables that can not be measured directly in the environment - latent variables. Therefore, we propose the use of factor analysis to estimate these variables in order to use them for spatial modelling. On the contrary, the main aim of the commonly used principal components analysis method is to explain the variability of observed variables and it does not permit to explicitly identify the different types of environmental contamination. We propose to model the concentration of each heavy metal as a linear combination of its main sources of pollution, similar to the case of multiple regression where these latent variables are identified as covariates, though these not being observed. Moreover, through the use of geostatistical methodologies, we suggest to obtain maps of predicted values for the different sources of pollution. With this, we summarize the information acquired from the concentration measurements of the various heavy metals, and make possible to easily determine the locations that suffer from a particular source of pollution.     

Sediments as a potential tool for assessment of sewage pollution in Barigüi River, Brazil

Sediments constitute a pollutant trap and have proven to be an efficient tool to identify environmental impacts. Sediments are considered a very important means to assess the level of contamination of water bodies because of their ability to accumulate metals and organic. The anthropogenic inputs of sewage, with or without prior treatment, in aquatic environments, affect the geochemical composition of sediment. In addition, the sediment adsorbs hydrophobic compounds found in feces, such as the fecal sterols. The granulometric and geochemical composition of the sediment of Barigüi River-Brazil was investigated. The results show that silt and clay dominate the granulometric composition of the sediments. The geochemical composition of sediments showed high concentrations of phosphorus and nitrogen. The Redfield ratios confirm the inputs of phosphorus and nitrogen. The TOC/N ratio was used to identify the source of pollution. N/TP ratios were found between 1.0 and 3.5. Clearly, an input of phosphorus, sewage is the most acceptable source, following the historic profile of the Barigüi River. High concentration of nitrogen phosphorus labels the area to be polluted by sewage. To confirm the sewage pollution, adsorbed fecal sterols in sediments were investigated. The concentration of total sterols was found between 0.86 and 304.58 μg g^???1. Two distinguished scenario was found, one severely polluted and another slightly polluted. The highest concentrations of total fecal sterols were associated with sediment whose geochemical composition showed higher levels of TOC, as well as higher proportions of silt and clay. Also, epicoprostanol, a coprostanol isomer, was used as an indicator of the level of treatment or age of the fecal matter because it is formed during the treatment of wastewater and sludge digestion. If the treatment of sludge takes a long time, epicoprostanol can form from cholesterol, and relative proportions of those compounds may be used as an indicator of the presence of untreated sewage in the sediments. The epicoprostanol was found in the range between 0.02 and 9.71 μg g^???1; concentration of up to 0.015 μg g^???1 represents situations where there is strong contamination by sewage. All sites investigated showed a concentration of epicoprostanol higher than the value adopted as threshold. The lower concentration of epicoprostanol found for all sites is consistent with the high concentration found for coprostanol, and this is typical for untreated sewage.     

Overview of deaths associated with natural events, United States, 1979-2004.

Analysis of the National Center for Health Statistics' Compressed Mortality File showed that between 1979 and 2004, natural events caused 21,491 deaths in the United States. During this 26-year period, there were 10,827 cold-related deaths and 5,279 heat-related deaths. Extreme cold or heat accounted for 75 per cent of the total number of deaths attributed to natural events--more than all of deaths resulting from lightning, storms and foods, and earth movements, such as earthquakes and landslides. Cold-related death rates were highest in the states of Alaska, Montana, New Mexico, and South Dakota, while heat-related deaths were highest in the states of Arizona, Missouri, and Arkansas. These deaths occurred more often among the elderly and black men. Other deaths were attributed to lightning (1,906), storms and foods (2,741), and earth movements (738). Most deaths associated with natural events are preventable and society can take action to decrease the morbidity and mortality connected with them.