Nitro-PAH formation studied by interacting artificially PAH-coated soot aerosol with NO2 in the temperature range of 295–523 K

Diesel particulate matter poses a threat to human health, and in particular nitrated polycyclic aromatic hydrocarbons (NPAHs) found within and on the surface of these particles. Although diesel particulate filters (DPFs) have been designed and implemented to reduce these and other harmful diesel emissions, the particle loaded filters may act as a reaction chamber for the enhanced production of NPAHs from the nitration of PAHs with NO₂.Focus is on the investigation of the heterogeneous reactions that occur on soot particles by exposing laboratory produced pyrene- or benzo(a)pyrene-coated spark discharge soot particles to varying concentrations of NO₂ and temperatures while following the formation of products over time. The sole nitration product that was observed throughout the experiments with pyrene-coated soot was 1-nitropyrene (1-NPYR), which increased linearly with reaction time for all NO₂ concentrations chosen (0.11, 1.0, 2.0, 4.0 ppm, m m^?1). Resulting 1-NPYR formation rate increased exponentially with [NO₂]. Throughout the 3-h experiments less than 10% of pyrene has been converted to 1-NPYR and the partial reaction order with regard to [NO₂] was estimated to 1.52. Benzo(a)pyrene (BaP) was more reactive than pyrene. After 3 h reaction time almost 80% of the BaP has been converted to 6-NBaP.Highest 1-NPYR concentrations on particles were detected at 373 K, and at higher temperatures a considerable decrease in particulate 1-NPYR was observed. A similar trend was observed in a DPF simulation system (PM-Kat^®-like) with BaP-coated soot. In this case, highest 6-NBaP concentration on particles was detected at 423 K. Backed by corroborating results from separate gas/solid-phase partition experiments with 1-NPYR and 6-NBaP, it is likely that the newly formed 1-NPYR and 6-NBaP became transferred from particle to gas phase at higher temperatures. Results from this study confirm the presence of 1-NPYR and 6-NBaP in particulate and gas phase under conditions encountered in DPFs, especially when operated at low temperature situations of the aftertreatment system.     

Assessing inter-laboratory comparability and limits of determination for the analysis of cyclic volatile methyl siloxanes in whole Rainbow Trout (Oncorhynchus mykiss)

Cyclic volatile methyl siloxanes (cVMS) are high volume production chemicals used in a wide range of industrial and consumer products. Three cVMS compounds (D4, D5, and D6) have and are undergoing environmental risk evaluations in several countries and have been proposed for legal regulation in Canada. As interest in monitoring concentrations of these chemicals in the environment increase, there is a need to evaluate the analytical procedures for cVMS in biological matrices in order to assess the quality of data produced. The purpose of this study was to determine laboratory testing performance for measuring residues of D4, D5, and D6 in a standard set of fish homogenate samples and to estimate limits of determination for each substance. The samples sent to each laboratory consisted of homogenized whole body tissues of hatchery raised rainbow trout which were fed food fortified with D4, D5, and D6 (dosed) and trout that were fed standard food rations (control). The participants analyzed each sample using their analytical method of choice using their own standards and procedures for quantification and quality control. With a few exceptions, participating laboratories generated comparable results for D4, D5, and D6 in both the dosed and control samples having z-scores between 2 and −2. Method detection limits for the whole fish matrix were on average 2.4 ng g⁻¹ ww for D4, 2.3 ng g⁻¹ ww for D5, and 1.8 ng g⁻¹ ww for D6.     

Detecting diclofenac in livestock carcasses in India with an ELISA: a tool to prevent widespread vulture poisoning

Diclofenac, a non-steroidal anti-inflammatory drug (NSAID), has caused catastrophic vulture declines across the Indian sub-continent. Here, an indirect ELISA is used to detect and quantify diclofenac in 1251 liver samples from livestock carcasses collected across India between August 2007 and June 2008, one to two years after a ban on diclofenac manufacture and distribution for veterinary use was implemented. The ELISAs applicability was authenticated with independent data obtained using LC-ESI/MS. Of 1251 samples, 1150 (91.9%) were negative for diclofenac using both methods, and 60 (4.8%) were positive at 10-4348 and 10-4441 μg kg(-1) when analysed by ELISA and LC-ESI/MS, respectively. The residue level relationship in the 60 positive samples was highly significant (p < 0.001, r(2) = 0.644). Data suggest that this immunological assay could be used not only for cost effective sample screening, but also for residue level semi-quantification.     

Concentrations and specific loads of brominated flame retardants in sewage sludge

Many substances related to human activities end up in wastewater and accumulate in sewage sludge. The present study focuses on two classes of brominated flame retardants: polybrominated diphenyl ethers (BDE28, BDE47, BDE49, BDE66, BDE85, BDE99, BDE100, BDE119, BDE138, BDE153, BDE154, BDE183, BDE209) and hexabromocyclododecane (HBCD) detected in sewage sludge collected from a monitoring network in Switzerland. Mean concentrations (n=16 wastewater treatment plants) were 310, 149, 95 and 17microg per kg dry matter for decaBDE, HBCD, penta- and octaBDE, respectively. These numbers correspond well with other studies from European countries. DecaBDE, HBCD, penta- and octaBDE showed average specific loads (load per connected inhabitant per year) in sludge of 6.1, 3.3, 2.0 and 0.3mgcap(-1)yr(-1), respectively. This is in line with consumption and storage of the compounds in the environment and the anthroposphere. Discrepancies observed for octaBDE and HBCD can be explained by the release from materials where these compounds are incorporated in and/or their degradation during anaerobic sludge treatment. Loads from different types of monitoring sites showed that brominated flame retardants ending up in sewage sludge originate mainly from surface runoff, industrial and domestic wastewater.     

Biomonitoring zur wirkungsbezogenen Ermittlung der Schadstoffbelastung in terrestrischen Ökosystemen

Biomonitoring programmes provide relevant information, which may supplement ambient air pollution monitoring or modelling around emission sources. As a prerequisite, assessment scales for biomonitoring data have to be derived based on an objective evaluation of available data, as well as on a scheme of presentation, which is suggestive and easily understandable even for laymen. Based on an evaluation of numerous monitoring programmes, assessment scales for biomonitoring results are derived for plant biomonitoring, which also serve as a basis for the graphical presentation of monitoring results. This study is focussed on bioindicator plants like mosses (passive biomonitoring) and exposed lichens (active biomonitoring), in which 14 metal elements are investigated. As an example, data from a local biomonitoring network around a cement plant were used to demonstrate the use of the assessment scales derived and the presentation scheme developed. Data sets from about 15 moss and 24 lichen biomonitoring programmes, comprising more than 1000 specimens, were sorted by their pollutant characteristics in order to form the database. Data on the metal contents of species demonstrating similar values with respect to growth characteristics and habit, and representing background or low pollution levels, are aggregated and their statistical distributions are evaluated. Spacing of the assessment scales and their colour designations are derived from the 50-, 75-, 90- and 95-percentile values. Graphical presentation allows a comparison of the absolute values of metal contents and a relative association of measured values. Exemplary results from moss and lichen monitoring around a cement plant are generally below or slightly above the median values at background and low-pollution sites. Metal contents are higher in lichens compared to mosses for 7 elements (Cd, Cu, Hg, Pb, Sb, Sn, Zn), and are lower in lichens only for thallium. The assessment scheme presented is mainly aimed at the practitioner in the field of biomonitoring in order to provide a reliable and sound scale of assessment by comparison on an absolute scale rather than presenting the basis of ecological risk assessment. Differences in metal content of co-located samples of various moss species and possible correction procedures are briefly discussed- as well as the consequences of pooling monitoring data across various moss species for the quality of assessment scales. Further evaluations shall focus on species-specific rather than on pooled databases and will investigate the consequences of the use of correction factors when extrapolating metal data from one monitoring species to another.     

DETECTION OF FRESH WATER AQUIFERS IN THE GLACIAL DEPOSITS OF NORTHWESTERN MISSOURI BY GEOELECTRICAL METHODS1

Geoelectrical investigations in Grundy County of northwestern Missouri, where the groundwater resources of the glacial deposits have already been examined through an extensive drilling program by the Missouri Geological Survey and Water Resources, indicate that water-bearing gravel deposits can be distinguished from glacial deposits containing appreciable amounts of clay and limited amounts of water. The Schlumberger method used for the geoelectric depth soundings in the vicinity of the Survey's drillholes demonstrates the exploratory usefulness of the method in that it can partly replace the more expensive procedure of drilling. The method also provides improved interpretation between drillholes. Results of the investigation show that, in the area, clay has a resistivity below 20in, that the fresh water-bearing gravel at the bottom of the buried glacial stream channels has a resisitivity of 40 to 50fim, and that the near surface glacial gravel deposits have a resistivity above lOOfim. Interpretation of the depth soundings and the conductivity of water obtained from a local well implies that its water is drawn from the saline water of the bedrock. A recommendation is made for the quality improvement of this particular well.     

Disaster safety nets for developing countries: Extending public–private partnerships

In developed countries, public–private partnerships involving insurance companies and governments often provide security against the human and economic losses of disasters. These partnerships, however, are neither available nor affordable in most highly exposed developing countries. In this paper we examine recent innovations in financial risk management that extend traditional public–private partnerships to include NGOs, international financial institutions and other donors. Importantly, these partnerships provide secure financial arrangements to low-income communities before disasters strike and thus relieve the uncertainty and anxiety of depending on ad hoc post-disaster aid for recovery and even survival. We examine three examples of extended partnerships: the Turkish Catastrophe Insurance Pool; the Andhra Pradesh microinsurance program and an index-based weather derivative for farmers facing drought in Malawi.     

THE DEPENDENCE OF THE RESIDUAL GRAVITY ON HYDRAULIC CONSTANTS IN GLACIAL DEPOSITS1

ABSTRACT: Buried glacial stream channels contain large and easily accessible groundwater resources. Gravity surveys have been frequently applied for their location. A gravity survey in the geohydrologically explored Wood River Valley Area of southern Rhode Island shows extreme lows of -2 mgals over channel depths of maximal 300 feet. Three gravity profiles were observed in east-west direction across a north-south striking stream channel. The bedrock depth increases rapidly towards the south from 130 to 300 feet. The gravity lows observed across each profile are not related to the bedrock depth but rather to the saturated thickness of the main quifer and its hydraulic transmissivity. Well logs indicate that the large change of bedrock depth is solely due to an increase of till of low permeability. The volume of the glacial outwash, which is the major groundwater resource, changes little underneath the three profiles. The gravity lows apear to be directly related to the density contrast between glacial outwash and till. The response to the hydraulically more pertinent units renews the interest in the gravity method as it may have a potential to estimate yields of hydrologically complex aquifers