Trace elements in fish and oysters from Sepetiba Bay (Rio de Janeiro – Brazil) determined by total reflection X-ray fluorescence using synchrotron radiation

Trace elements were determined in fish and oysters from Sepetiba Bay, Brazil, by total reflection Xray fluorescence using synchrotron radiation (SRTXRF). Cr, Mn, Fe, Ni, Cu, Zn and Se were determined in fish muscles and organs and in oyster soft tissue. SRTXRF was shown to be a good tool for the analysis of trace elements from biological tissue samples. Overall, the levels of the analysed metals were higher in oysters than in the fish samples. Metals were not uniformly distributed throughout the body of the analysed fish. The detected concentrations of Cr, Zn and Se were very high in some samples, surpassing the maximum limits established by Brazilian legislation.     

Total peroxides in rainwater at two mountainous sites and in Mexico City,Mexico

Rainwater samples were collected in the western sector of Mexico City (MC) and at Rancho Viejo (RV), 80 km west-south-west of MC, from 2001 to 2005, and Orizaba City (OC), about 90 km from the Gulf of Mexico, where rainwater collections were only possible on some weekends in 2001. Rainwater samples were treated in the field, and analysed by fluorescence at the laboratory. The volume-weighted mean concentration (VWMC) of H₂O₂ was 13.2 μM at RV, and 11.2 μM in MC, for the period 2001–2005. The highest VWMC was observed in OC (21.6 μM). The VWMCs for each year were 9.5, 14.4, 11.5, 16.7, and 14.3 μM at RV, and 12.2, 12.2, 14.3, 11.8, and 9.9 μM in MC, for 2001–2005, respectively. Hydrogen peroxide in rainwater correlated significantly and negatively with sulfate in both MC and RV, but not, however, in OC. This study confirmed that H₂O₂ concentration in rainwater is controlled by a complex combination of rain intensity, washout processes and in-cloud formation of H₂O₂, acting simultaneously. This was suggested by the fact that rain intensity seemed to predominate in certain rain fractions of a rain event, while washout processes seemed to predominate in other fractions of the same rain event.     

Assessment of organic and inorganic contaminants in sediments of an urban tropical eutrophic reservoir

Although the Ibirité reservoir (an urban tropical eutrophic reservoir) has been the recipient of the discharge of a large volume of raw urban sewage, the key cause of ecosystem degradation has been historically solely attributed to the discharge of effluents from an oil refinery. This fact motivated an investigation to unravel the compositions of contaminants in the sediments to evaluate their distributions, possible sources, and potential impacts on sediment–water quality. The concentrations of polycyclic aromatic and aliphatic hydrocarbons and of metals and metalloids were, in general, significantly lower than some selected polluted sites used for comparison. Calculated distribution indexes showed that the hydrocarbon sources were petrogenic, pyrogenic, and biogenic. Only a few PAHs exceeded the threshold effects level (TEL) guideline. Industrial activities are the presumed sources of metals and metalloids except for copper, which is from copper sulfate used as algaecide in the reservoir. The bioavailable concentrations of some metal and metalloid exceeded the TEL–PEL guidelines. The acid volatile sulfide concentration was greater than that of the simultaneously extracted metals in the clayey–silty reservoir sediments, whereas the opposite result was observed for the sandy sediments of the tributaries. The sediment interstitial water toxic units were >1 for metals, thus indicating that metals are potentially toxic to the benthos. Considering the data set generated in this study, it can be concluded that the degradation of Ibirité reservoir and its tributaries cannot be solely attributed to the input of hydrocarbons, but predominantly to the discharge of raw urban sewage and effluents from other industrial sources.     

Geographical location and key sensitivity issues of post-industrial regions in Europe

Primary objectives of our work were to spatially delineate post industrial areas of the EU-27 and indicate key environmental, social and economic sensitivity issues for these regions. The density of industrial sites within NUTS-x regions for EU-27 countries was assessed by using CORINE 2000 land cover layer. A development of postindustrial society in Europe represents a strong geographic diversity. There are distinct historical and current differences between regions which form major groups, comprising similar internal characteristics and definable trends in environmental and socioeconomic sense. Regions grouped into postindustrial clusters are fundamentally different from the European average, and are facing specific problems related to global market and political changes. Eastern postindustrial regions can be characterized as socially and economically weak, exhibiting high unemployment rate, low GDP, negative population growth and a strong environmental pressure, represented by a high density of dump sites. Most of the western EU postindustrial areas have been successfully recovered and moved into new economy as shown by most of the indicators. In urban postindustrial zones, however, emission sources of pollutants seem to continually be a major problem--not necessarily in terms of exceeding thresholds, but through a remarkable difference in the amount of pollutants produced relative to other regions.     

Evaluation of cetacean exposure to organotin compounds in Brazilian waters through hepatic total tin concentrations

In Brazil, there is no restriction to the use of organotins (OTs). Previous investigations have shown that hepatic ∑Sn in cetaceans is predominantly organic. Hepatic ∑Sn concentrations were determined by GFAAS in 67 cetaceans (13 species) that stranded on Rio de Janeiro (RJ) and Espirito Santo (ES) states. Concentrations (in ng/g wet wt.) of marine tucuxis (n = 20) from the highly contaminated Guanabara Bay (in RJ) varied from 1703 to 9638. Concentrations of three marine tucuxi foetuses and one newborn calf (all from Guanabara Bay) varied between 431 and 2107. Contrastingly, the maximum level among 19 oceanic dolphins was 346, and 15 out of these 19 specimens presented concentrations below detection limit. The levels of Sn in six marine tucuxis from a less contaminated area (ES) varied from below detection limit to 744. Comparing to the literature, coastal cetaceans from Brazil appear to be highly exposed to OTs.     

Characterization of municipal solid waste from the main landfills of Havana city

The city of Havana, the political, administrative and cultural centre of Cuba, is also the centre of many of the economic activities of the nation: industries, services, scientific research and tourism. All of these activities contribute to the generation of municipal solid waste (MSW), which also impact other Cuban cities. Inadequate handling of waste and the lack of appropriate and efficient solutions for its final disposal and treatment increase the risk and possibility of contamination. The main difficulty in the development of a system of management of MSW lies in the lack of knowledge of the chemical composition of the waste that is generated in the country as a whole, and especially in Havana, where solid waste management decisions are made. The present study characterizes MSW in Havana city during 2004. The Calle 100, Guanabacoa and Ocho Vías landfills were selected for physical-chemical characterization of MSW, as they are the three biggest landfills in the city. A total of 16 indicators were measured, and weather conditions were recorded. As a result, the necessary information regarding the physical-chemical composition of the MSW became available for the first time in Cuba. The information is essential for making decisions regarding the management of waste and constitutes a valuable contribution to the Study on Integrated Management Plan of MSW in Havana.     

Effect of alkaline pretreatment on anaerobic digestion of solid wastes

The introduction of the anaerobic digestion for the treatment of the organic fraction of municipal solid waste (OFMSW) is currently of special interest. The main difficulty in the treatment of this waste fraction is its biotransformation, due to the complexity of organic material. Therefore, the first step must be its physical, chemical and biological pretreatment for breaking complex molecules into simple monomers, to increase solubilization of organic material and improve the efficiency of the anaerobic treatment in the second step. This paper describes chemical pretreatment based on lime addition (Ca(OH)2), in order to enhance chemical oxygen demand (COD) solubilization, followed by anaerobic digestion of the OFMSW. Laboratory-scale experiments were carried out in completely mixed reactors, 1 L capacity. Optimal conditions for COD solubilization in the first step of pretreatment were 62.0 mEq Ca(OH)2/L for 6.0 h. Under these conditions, 11.5% of the COD was solubilized. The anaerobic digestion efficiency of the OFMSW, with and without pretreatment, was evaluated. The highest methane yield under anaerobic digestion of the pretreated waste was 0.15 m3CH4/kg volatile solids (VS), 172.0% of the control. Under that condition the soluble COD and VS removal were 93.0% and 94.0%, respectively. The results have shown that chemical pretreatment with lime, followed by anaerobic digestion, provides the best results for stabilizing the OFMSW.     

Factors that affect the quality of the bio-waste fraction of selectively collected solid waste in Catalonia

The present study determines the composition of the bio-waste fraction of waste and establishes correlations between the quality of this fraction and socio-economic/demographic variables. According to the Catalan Waste Agency [Agència de Residus de Catalunya (2004). Statistical data. Available from: ], the quantities of glass, paper/cardboard, light packaging and biodegradable material (those components of municipal waste that can be recovered, and have a separate collection) that were selectively collected in 2004 represent 25.6% by weight of the total municipal waste generated. There is a large spread of values from different cities. It is important to bear in mind that this percentage was calculated using the total weights of all of the materials present in the different bins used for selective solid waste collection, without taking account of the fact that many of these bins contain a certain amount of other, undesirable waste. In order to be able to determine the actual quantities that are recovered, it is necessary to establish the quality of the waste collected. To establish the quality of the waste collected, 350 samples were analysed, corresponding to the bins for the bio-waste fraction of solid waste in 193 different cities in Catalonia. Seven levels of quality were established for the study, depending on the amount of undesirable waste present. The results show certain correlations between the socio-economic/demographic factors studied and the percentage of undesirable waste present in the samples. The correlations presented here are not intended to be predictive, but rather indicative of a tendency, which should help us gain a better understanding of the behaviour of the society studied with respect to the separation of solid household waste at origin.     

The influence of environmental factors on the carbon dioxide flux across the water–air interface of reservoirs in south-eastern Poland

Studies concerning the emission of carbon dioxide(CO_2) were carried out in 2009–2012 for six reservoirs located in four provinces of south-eastern Poland. The CO_2 flux across the water–air interface was measured using the "static chamber" method. The measured fluxes of CO_2(FCO_2) ranged from-30.64 to 183.78 mmol/m~2/day, and the average values varied in the range from-3.52 to 82.11 mmol/m2/day. In most of the cases, emission of CO_2 to the atmosphere was observed. The obtained values of CO_2 fluxes were comparable to values typical for other temperate reservoirs. Analysis of the influence of selected environmental factors on the FCO_2 showed that it depends on parameters characterizing both the sediments and surface water. The CO_2 flux at the water–air interface was positively correlated with parameters of bottom sediments such as porosity, content of organic carbon and total nitrogen; and negatively with p H value and δ~(13)C of organic carbon. In the case of the parameters characterizing surface water, positive dependences on the concentrations of nitrate and total nitrogen, and negative relationships with water temperature and chlorophyll a concentrations, were found.