Local mate competition and precise sex ratios in Telenomus fariai (Hymenoptera: Scelionidae), a parasitoid of triatomine eggs

Telenomus fariai is a gregarious endoparasitoid of the eggs of several species of Triatominae (Hemiptera) with a high degree of sibmating: males fertilize their sisters inside the host egg before emergence or emerge first and copulate with their sisters as these emerge. Our results show that, when laying alone, T. fariai behaves adaptively, minimizing offspring mortality and conforming to the prediction of local mate competition (LMC) theory by laying a single male, which is sufficient to fertilize all the sisters. When more than one wasp was placed with one host, sex ratios still conformed to LMC predictions but, despite the decreasing number of eggs laid per wasp, clutch size could not be completely adjusted to avoid mortality. This is not surprising, as superparasitism is rare in the field. Offspring production was independent of the contacts between conspecifics but was affected by the number of mothers laying on a single host egg. The sex of the progeny was precisely determined: a female produced one male per clutch when laying on both unparasitized or previously parasitized hosts. On the other hand, a mother produced less daughters when superparasitizing. Under crowded conditions, the number of eggs laid per female wasp and per host decreased as the number of mothers increased. Developmental mortality also increased with the number of T. fariai eggs per host, determining a maximum of approximately 14 emerged adults. Host resources per individual affected male and female adult size with similar intensity, and male adult mortality was slightly higher than that for females. These results, and previous findings, suggest that T. fariai attains Hamiltonian sex ratios by laying one male and a variable number of females, and that the detection of chemical marks left by conspecifics provides information on the number of foundresses sharing a patch. Received: 4 February 2000 / Received in revised form: 19 April 2000 / Accepted: 20 May 2000     

From waste to value-added products: A review of opportunities for fish waste valorization

The fishing industry is responsible for generating large amounts of organic waste rich in compounds of commercial interest. This review aimed to present the state of the art about the possibilities of using solid waste to obtain value-added products. Skins, fins, and scales have been used to obtain gelatin and collagen, a promising compound for use as an additive in yogurts and creams, as well as for the synthesis of biodegradable packaging that, if applicable, can reduce the environmental impact caused by petroleum packaging. Other parts, such as the head and the viscera, contain polyunsaturated fatty acids and other fat-soluble vitamins that have been studied for the production of omega-3 capsules for the pharmaceutical industry, but when the extracted oil does not fit the feeding parameters, it can be applied for the production of biodiesel. Furthermore, fishes are a promising source of astaxanthin, a carotenoid with high antioxidant properties. The use of combined techniques such as chemical and enzymatic methods can increase the extraction yield and favor the obtaining of more purified compounds, in addition to promoting the reduction of chemicals that are aggressive to the environment. In general, conscious production in the fishing industry through the valorization of waste generated for use as inputs for other value chains encompasses aspects of the circular economy, which can positively impact several Sustainable Development Goals.     

The influence of restoration measures on phosphorus internal loading from the sediments of a hypereutrophic lake

Environmental Science and Pollution Research - Uzarzewskie Lake was a hypereutrophic, dimictic lake characterized by low water transparency, high chlorophyll-a concentration and intense...     

Impact of nickel mining and metallurgical activities on the distribution of heavy metals in sediments of Levisa, Cabonico and Nipe Bays, Cuba

At MayarÕ zone, northeast Cuba, important lateritic deposits have been exploited since 1943. The mineral is used as raw material in a nickel-processing plant which discharges its untreated solid and liquid wastes into Levisa Bay. Similarly to the adjacent Nipe and Cabonico bays, fluvial currents from the mining areas convey a significant mineral load into this bay. To assess the environmental impact caused by the mining and the metallurgical activities, the distribution of Ni, Co, Fe, Mn, Cu, Pb and Zn was investigated in surface and core sediment samples. Uni- and multivariate statistical methods as well as different indices and pollutant factors were used to interpret results. These revealed significant environmental impacts in some areas of the three bays with high concentrations of Ni, Co, Fe and Mn, whose values are up to two orders of magnitude greater than the zone baseline levels. The metal concentrations decreased with increasing distance from discharges. A comparison with other Cuban bays and coastal zones, confirmed that the main source of metal pollution in these three bays was not urban and industrial activities, but lateritic mining and metallurgy.     

Relationship of oxygen consumption to swimming speed in Euphausia pacifica

Oxygen consumption rate was measured as a function of swimming velocity for the vertically migrating euphausiid Euphausia pacifica at two temperatures (8° and 12°C) and pressures (1 and 40 atm) typical of its bathymetric distribution. Increased swimming speed (x; mh^-1) required increased oxygen consumption (y; μl O₂ mg dry weight^-1 h^-1), described by the equation y = 0.012x + 0.64 at 8°C, and by y = 0.020x + 0.85 at 12° C. The current concept of low swimming costs of zooplankton, based on determinations of dead drag in copepods, is contradicted by our measurements. Temperature had a more profound effect on metabolism at higher swimming speeds (112 m h^-1; Q₁₀=2.8) than on standard metabolism (O m h^-1; Q₁₀=2.0), indicating that activity is more costly at higher temperatures. Pressure caused a small but significant (P>0.05) rise in the relationship of respiratory rate to swimming speed at both temperatures. The energy cost of vertical migration for E. pacifica was estimated by applying our data on oxygen consumption vs swimming speed to published observations on sonic scattering layer movement and the day-night distribution pattern of this species. Results indicate that the cost of a diel migration of 254 m, through a temperature change of 4 °C (8° to 12° C), would cancel any energetic benefit gained by time spent at the lower temperature typical of daytime depth. The act of vertical migration is energetically expensive; its cost should be thoroughly considered in attempts to describe the energetics of vertically migrating species.     

The value of early third-trimester maternal serum alpha-fetoprotein determination

The value of determination of maternal serum of alpha-fetoprotein (MSAFP) concentration in i he second trimester is well established. In addition to open neural tube defects, pregnancies associated with elevated second-trimester MSAFP have been shown to be at increased risk for a variety of problems, including low birth weight, preterm delivery, and pregnancy-induced hypertension (PIH). We evaluated the potential usefulness of MSAFP in the early third trimester. MSAFP concentration was determined in over 200 women at the time of glucose screening. Results were analysed with regard to gestational age at sampling, maternal weight, race, diabetes, and presence of twins. MSAFP was twice as high in twin gestation, but not affected by race or the presence of diabetes. In contrast to levels in early gestation, third-trimester MSAFP does not appear to be predictive of preterm delivery, low birth weight, or PIH.     

Photocatalytic degradation of imazethapyr herbicide at TiO2/H2O interface

The photocatalytic degradation of imazethapyr, a herbicide of the imidazolinone family, was investigated in an aqueous suspension of titanium dioxide used as a catalyst. A pseudo-first order kinetic model was employed to discuss the results. The effect of catalyst loading, initial concentration of imazethapyr, hydrogen peroxide, pH value, and temperature were investigated. Imazethapyr disappearance as a function of irradiation time was analyzed by HPLC. The ammonium ion formation was determined spectrophotometrically at 694 nm. The degradation was observed to proceed more favorably at natural pH (ca. 4.4) when the pH was varied in the range from 2 to 11. The addition of hydrogen peroxide to the TiO2 suspension enhanced the degradation rate constant up to 5.0x10(-3) mol l-1, but decreased it at higher concentrations. The degradation rate constants decreased by 19% with a temperature increase from 20 to 40 degrees C in the TiO2 suspension, whereas a 16% increase in imazethapyr direct photolysis was observed for the same temperature range. This behavior indicates the occurrence of physisorption between TiO2 and imazethapyr molecules.     

Measurements of carbonyls in a 13-story building

BACKGROUND, AIM AND SCOPE: Formaldehyde and acetaldehyde are emitted by many mobile and stationary sources and secondary aldehydes are intermediates in the photo-oxidation of organic compounds in the atmosphere. These aldehydes are emitted indoors by many materials such as furniture, carpets, heating and cooling systems, an by smoking. Carbonyls, mainly formaldehyde and acetaldehyde, have been studied because of their adverse health effects. In addition, formaldehyde is a suspected carcinogen. Therefore, the concentrations of formaldehyde and acetaldehyde were determined to assess the inhalation exposure doses to carbonyls for people who work in a 13-story building and in order to evaluate the cancer hazard. METHODS: Carbonyl compounds in indoor and outdoor air were measured at a 13-story building located in Mexico City. The mezzanine, fifth and tenth floors, and the third level-parking garage were selected for sampling. Samples were collected in two sampling periods, the first from April 20 to 29, 1998 and the second from December 1 to 20, 1998. Carbonyls were sampled by means of DNHP-coated cartridges at a flow rate of 1 l min(-1) from 9:00 to 19:00 hours, during 2-hour time intervals and analyzed by HPLC with hours, during 2-hour time intervals and analyzed by HPLC with UV/VIS detection. RESULTS: Mean carbonyl concentrations were highest in the 3rd level-parking garage, with the formaldehyde concentration being the highest ranging from 108 to 418 microg m(-3). In working areas, the highest carbonyl arithmetic mean concentrations (AM) were observed on the 5th floor. Acetone and formaldehyde concentrations were highest in April ranging from 161 to 348 microg m(-3) (AM = 226) and from 157 to 270 microg m(-3) (AM = 221), respectively. Propionaldehyde and butyraldehyde were present in smaller concentrations ranging from 2 to 25 and 1 to 28 microg m(-3), respectively, considering all the samples. Mean indoor/outdoor ratios of carbonyls ranged from 1.8 to 9.6. A reduction of inhalation exposure doses of 41% and 45% was observed in the fifth floor air after the air conditioning systems had been repaired. Formaldehyde and acetaldehyde concentrations were higher in smoking environments. CONCLUSION: Indoor carbonyl concentrations were significantly greater than outdoor concentrations. Tobacco smoke seems to be the main indoor source of formaldehyde. After the air conditioning system was maintained and repaired (as was recommended), an important reduction in the emission of formaldehyde and acetaldehyde was achieved on all floors, except for the 3rd level parking garage, thereby reducing the inhalation exposure doses. RECOMMENDATION: The results obtained in this research demonstrated that maintenance of air conditioning systems must be carried out regularly in order to avoid possible adverse effects on health. Additionally, it is mandatory that isolated smoking areas, with air extraction systems, be installed in every public building.