Multi-objective optimization model for water resource management: a case study for Riyadh,Saudi Arabia

A multi-objective goal programming model was developed for water distribution from multiple sources to multiple users. The model was applied in Riyadh, Saudi Arabia, for the period of 2015–2050. In Riyadh, water sources are groundwater (GW), desalinated water (DW) and treated wastewater (TWW), while the users are domestic, agricultural and industrial sectors. The model was applied to: (1) satisfy water demands and quality; (2) maximize TWW reuse and GW conservation; and (3) minimize overproduction of DW and overall cost. In 2015, the required allocations of GW, DW and TWW are 3286, 662 and 609 MCM, respectively, which are projected to be 4345, 1554 and 1305 MCM in 2050, respectively. GW source is likely to satisfy the predicted withdrawal of GW till 2035, while probabilities of non-satisfaction of full demands of GW in 2040, 2045 and 2050 were 0.04, 0.23 and 0.51, respectively. Supply of DW and reuse of TWW are needed to be increased to satisfy the predicted quantities during 2015–2050.     

Impact of COVID-19 lockdown on small-scale fishers (SSF) engaged in floodplain wetland fisheries: evidences from three states in India

Environmental Science and Pollution Research - The COVID-19 pandemic has created unprecedented human health crisis in recent global history with rippling social and economic effects. The outbreak...     

Stagnant surface water bodies (SSWBs) as an alternative water resource for the Chittagong metropolitan area of Bangladesh: physicochemical characterization in terms of water quality indices

The concern over ensuing freshwater scarcity has forced the developing countries to delve for alternative water resources. In this study, we examined the potential of stagnant surface water bodies (SSWBs) as alternative freshwater resources in the densely populated Chittagong metropolitan area (CMPA) of Bangladesh??where there is an acute shortage of urban freshwater supply. Water samples were collected at 1-month intervals for a period of 1 year from 12 stations distributed over the whole metropolis. Samples were analyzed for pH, water temperature (WTemp), turbidity, electrical conductivity (EC), total dissolved solids, total solids, total hardness, dissolved oxygen (DO), chloride, orthophosphates, ammonia, total coliforms (TC), and trace metal (Cd, Cr, Cu, Pb, As, and Fe) concentrations. Based on these parameters, different types of water quality indices (WQIs) were deduced. WQIs showed most of CMPA-SSWBs as good or medium quality water bodies, while none were categorized as bad. Moreover, it was observed that the minimal water quality index (WQI_m), computed using five parameters: WTemp, pH, DO, EC, and turbidity, gave a reliable estimate of water quality. The WQI_m gave similar results in 72% of the cases compared with other WQIs that were based on larger set of parameters. Based on our finding, we suggest the wider use WQI_m in developing countries for assessing health of SSWBs, as it will minimize the analytical cost to overcome the budget constraints involved in this kind of evaluations. It was observed that except turbidity and TC content, all other quality parameters fluctuated within the limit of the World Health Organization suggested standards for drinking water. From our findings, we concluded that if the turbidity and TC content of water from SSWBs in CMPA are taken care of, they will become good candidates as alternative water resources all round the year.     

Load maximization of a liquid-solid circulating fluidized bed bioreactor for nitrogen removal from synthetic municipal wastewater

A novel liquid-solid circulating fluidized bed bioreactor (LSCFB) configured with anoxic and aerobic columns and lava rock as the biofilm carrier was used to treat synthetic municipal wastewater. Four different empty bed contact times (EBCTs) of 0.82, 0.65, 0.55, and 0.44 h were examined to optimize nutrient removal capability of the system. The LSCFB demonstrated tertiary effluent quality organic and nitrogen removal efficiencies. Effluent characteristics of the LSCFB were soluble biological oxygen demand (SBOD)10 mg l(-1) and total nitrogen (TN)<10 mg l(-1) at organic loading rate (OLR) of 5.3 kg m(-3)d(-1) and nitrogen loading rate of 0.54 kg Nm(-3)d(-1). Remarkably low yields of 0.14, 0.17, 0.19, and 0.21 g VSS g(-1)COD were observed at OLR of 2.6, 3.2, 4.1 and 5.3 kg COD m(-3)d(-1), where increment of biomass growth and detachment rate were also experienced with increasing OLR. However the system demonstrated only 30% phosphorus removal, and mass balances along the anoxic and aerobic columns showed biological phosphorus removal in the system. Organic mass balance showed that approximately 40% of the influent COD was utilized in the anoxic column and the remaining COD was oxidized in the aerobic column. The system is very efficient in nitrification-denitrification, with more than 90% nitrification of ammonium and overall nitrogen removal in the LSCFB was 70+/-11% even at an EBCT of 0.44 h.     

Identification of brake wear particles and derivation of a quantitative tracer for brake dust at a major road

Traffic-generated air pollutant emissions can be classified into exhaust and non-exhaust emissions. Increased attention is focussing on non-exhaust emissions as exhaust emissions are progressively limited by regulations. To characterise metal-rich emission from abrasion processes, size-segregated analysis of atmospheric aerosol particles sampled with micro-orifice uniform deposit impactors (MOUDI) in March 2007 in London was performed. The samples were collected at a roadside and a background site and were analysed for Al, Ba, Cu, Fe, Sb, Ti, V, Zn, Ca²⁺, K⁺, Mg²⁺, Na⁺, and NH₄⁺. Most components showed a clear roadside increment, which was evident as a higher mass concentration and a change in the size distribution. In particular, Fe, Cu, Ba, and Sb correlated highly, indicative of a common traffic-related source. Using complementary information on the fleet composition, vehicle number and average speed, the brake wear emission was calculated using the EMEP/CORINAIR emission database. The total PM₁₀ and barium emission of the traffic was determined by ratio to NO_x whose source strength was estimated from published emission factors. Barium was found to comprise 1.1% of brake wear (PM₁₀) particles from the traffic fleet as a whole, allowing its use as a quantitative tracer of brake wear emissions at other traffic-influenced sites.     

Removal of Pb2+ from water using the carbon nanotube-g-poly[(sodium methacrylate)-co- 2-(methacryloyloxy)ethyl acetoacetate]: experimental investigation and modeling

Environmental Science and Pollution Research - A solid polymer, poly[(sodium methacrylate)-co-2-(methacryloyloxy)ethyl acetoacetate], p(MAA-co-MEAA) was synthesized and then grafted onto carbon...     

Concentrations of some heavy metals in commercially important finfish and shellfish of the River Ganga

Heavy metals are dangerous to aquatic organisms and it can be bioaccumulated in the food chain leading to diseases in human. Cumulative effects of metals or chronic poisoning may occur as a result of long-term exposure even to low concentrations. The accumulation of heavy metals varies depending upon the species, environmental conditions, and inhibitory processes. Concentrations of zinc, copper, lead, and cadmium were determined in finfish and shellfish species in the Gangetic delta using a PerkinElmer Sciex ELAN 5000 ICP mass spectrometer and expressed as milligrams per kilogram of dry weight. In finfish and shellfish species the concentrations of Zn, Cu, Pb, and Cd were comparatively higher at stations 1 and 2 than the permissible level of WHO. The concentration of metals exhibited significant spatial variation and followed the order station 1 > station 2 > station 3 > station 4, which may be related to different degree of contamination in different location. The metal accumulation exhibited species specificity.     

Development and application of a methodology for determining background groundwater quality at the Savannah River Site

A statistical methodology formulated for defining background or baseline levels of constituents of concern in groundwater is presented. The methodology was developed for the case where prior delineation of unimpacted areas is not possible because of site history and a large set of groundwater monitoring measurements exists. Consideration was given to spatial and temporal trends, outliers, and final segregation of wells into impacted or unimpacted categories to develop probability distributions and summary statistics for each constituent evaluated. The formulated approaches were applied to groundwater monitoring data for the U.S. Department of Energy Savannah River Site facility, and results for four representative constituents (aluminum, arsenic, mercury, and tritium) are discussed.     

Evaluation of pesticides and metals in fish of the Dniester River, Moldova

The Dniester River is one of the largest rivers in Eastern Europe and receives input from numerous anthropogenic activities. In October 2001, fish samples (Abramis brama, Rutilus rutilus heckeli, Perca fluviatilis, Chondrostoma nasus, Carassius auratus gibelio, and Cyprinus carpio) were collected and analyzed for metals and various pesticides. Maximum total DDT pesticide concentrations were between 27.7 and 34.2 ng/g wet weight in muscles and gonads, respectively. DDE isomers comprised up to 70% of total DDT measurement in fish tissues, indicating historical rather than recent DDT pollution. Chlordane and lindane were also detected in amounts up to 37 and 76 ng/g wet weight in gonads, respectively. Among organophosphorous pesticides, malathion showed extremely high concentrations--3 microg/g wet weight in muscles and 46 microg/g wet weight in gonads, indicating recent exposure. Copper concentrations in muscles (1.8-7.2 microg/g) exceeded Threshold Effect Concentrations for copper in fish. Detection of high concentrations of malathion and copper in fish tissues indicated potential anthropogenic stress for more sensitive aquatic biota, likely from agricultural sources in the Dniester River.