Identifying the source and accessing the spatial variations,contamination status,conservation threats of heavy metal pollution in the river waters of Sunderban biosphere reserve,India

This study emphasizes on identification of source and accessing the spatial variation of dissolved heavy metals (Cu, Cd, Fe, Ni, Pb and Zn) in the rivers of Sundarban Biosphere Reserve India, the UNESCO world heritage site. ANOVA (Analysis of Variance), PCA (Principal Component Analysis) as well as FA (Factor Analysis) are used for assessing the significant difference in means of metals concentration among the sites and understanding the sources of these pollutants. Three principal components with cumulative variance of 32, 55, and 73 %, show that Pb, Ni and Cd are closely associated with each other indicating an anthropogenic origin of these metals. Heavy metal evaluation index (HEI) values indicate that areas close to densely populated sites are affected by elevated metals concentration due to anthropogenic activities. The ratio between the concentration of Cd, Ni and Pb in sites and the maximum respective permissible limit for these metals for conserved habitat is Log₁₀ normalized to understand the threats of these pollutants over the distributaries of Sundarbans. Pb pollution is prevalent in the areas that rely on the fossil fuel-operated boats, for transport, whereas higher Cd concentration is found in the areas dependent on rechargeable batteries to meet their energy demand. So these anthropogenic activities and mal-practices may be responsible for the heavy metal pollution in this region. The study concludes that gradual increase in metal pollution in river water due to anthropogenic activities, particularly Pb and Cd, could have a negative impact on the conserved flora and fauna of this ecosystem.     

Assessing combined toxic effects of tetracycline and P25 titanium dioxide nanoparticles using Allium cepa bioassay

• UVA pre-irradiation to TiO₂ NPs enhanced its toxicity toward plant A. cepa. • UVA TiO₂ NPs increased intracellular ROS, resulting in more cell damage. • Cell death enhanced cell permeability and increased uptake of NPs. • Being highly toxic (EC₅₀ = 0.097 µmol/L), TC did not increase ROS generation. • Even at a low dose, TC enhanced the toxic potential of TiO₂ NPs significantly. Usage of titanium dioxide nanoparticles (TiO₂ NPs) and tetracycline (TC) has increased significantly in the present era. This leads to their release and accumulation in the environment. Both the compounds, individually, can have adverse toxic effects on the plants. Their binary mixtures can increase this degree of damage. The present study aimed to evaluate the toxicity of both the contaminants in individual and binary mixtures in Allium cepa. Further, the toxicity of TiO₂ NPs upon UVA pre-irradiation was also measured. Results showed that UVA pre-irradiated NPs (UVA-TiO₂ NPs) had a significant decrease in cell viability than their non-irradiated counterparts (NI-TiO₂), denoting an increase in photocatalytic activity upon UVA pre-irradiation. Very low concentrations of TC (EC₁₀ = 0.016 µmol/L) mixed with TiO₂ NPs significantly increased the toxicity for both UVA-TiO₂ and NI-TiO₂ NPs. Intracellular ROS generation was significantly high for UVA-TiO₂ NPs. However, TC did not have any effects on ROS production. Both the compounds exhibited genotoxic potential in A. cepa. Different chromosomal abnormalities like anaphase bridges, telophase bridges, laggard chromosomes, binucleate cells, etc. were observed. The binary mixture of UVA-TiO₂ NPs and TC showed the highest chromosomal aberrations (64.0%±1.26%) than the mixture with NI-TiO₂ or the individual contaminants. This decreased significantly after recovery (46.8%±1.92%), denoting the self-repair processes. This study proved that UVA-TiO₂ NPs were more toxic and could be enhanced further when mixed with a sub-lethal concentration of TC. This work will help to assess the risk of both compounds in the environment.     

Treatment of electronic waste to recover metal values using thermal plasma coupled with acid leaching--a response surface modeling approach

The global crisis of the hazardous electronic waste (E-waste) is on the rise due to increasing usage and disposal of electronic devices. A process was developed to treat E-waste in an environmentally benign process. The process consisted of thermal plasma treatment followed by recovery of metal values through mineral acid leaching. In the thermal process, the E-waste was melted to recover the metal values as a metallic mixture. The metallic mixture was subjected to acid leaching in presence of depolarizer. The leached liquor mainly contained copper as the other elements like Al and Fe were mostly in alloy form as per the XRD and phase diagram studies. Response surface model was used to optimize the conditions for leaching. More than 90% leaching efficiency at room temperature was observed for Cu, Ni and Co with HCl as the solvent, whereas Fe and Al showed less than 40% efficiency.     

Medical aspects of volcanic disasters: An outline of the hazards and emergency response measures

The health and safety hazards posed by volcanic eruptions are outlined with special reference to experience gained from the eruptions of Mount St. Helens in 1980. The ability of volcanologists to predict the timing and the impact on local communities of an impending eruption are limited, some recent devastating eruptions having occurred without apparent warning. With the expansion of world populations into hazardous volcanic areas there is a growing need to develop appropriate emergency response measures. This paper describes the main preventive public and occupational health measures that are now a necessary part in dealing with volcanic emergencies.     

Consensus Seasonal Flood Forecasts and Warning Response System (FFWRS): An Alternate for Nonstructural Flood Management in Bangladesh

Despite advances in short-range flood forecasting and information dissemination systems in Bangladesh, the present system is less than satisfactory. This is because of short lead-time products, outdated dissemination networks, and lack of direct feedback from the end-user. One viable solution is to produce long-lead seasonal forecasts—the demand for which is significantly increasing in Bangladesh—and disseminate these products through the appropriate channels. As observed in other regions, the success of seasonal forecasts, in contrast to short-term forecast, depends on consensus among the participating institutions. The Flood Forecasting and Warning Response System (henceforth, FFWRS) has been found to be an important component in a comprehensive and participatory approach to seasonal flood management. A general consensus in producing seasonal forecasts can thus be achieved by enhancing the existing FFWRS. Therefore, the primary objective of this paper is to revisit and modify the framework of an ideal warning response system for issuance of consensus seasonal flood forecasts in Bangladesh. The five-stage FFWRS—i) Flood forecasting, ii) Forecast interpretation and message formulation, iii) Warning preparation and dissemination, iv) Responses, and v) Review and analysis—has been modified. To apply the concept of consensus forecast, a framework similar to that of the Southern African Regional Climate Outlook Forum (SARCOF) has been discussed. Finally, the need for a climate Outlook Fora has been emphasized for a comprehensive and participatory approach to seasonal flood hazard management in Bangladesh.     

DRAWDOWN AT TIME-DEPENDENT FLOWRATE1

ABSTRACT: The exact solution for the drawdown in and around a well in a homogeneous, isotropic, and confined aquifer is presented if the well discharge is a function of time. The effect of the storage capacity of the well is also taken into consideration. Two types of flowrate functions are studied, namely linear and exponential functions, and the results are plotted in graphs.     

Metabolic fate of dichloromethyl-O,O-diphenyl phosphonate (I) and dichloromethyl-O,O-Di-(p-nitrophenyl) phosphonate (II) in/on rice plants.

Metabolic fate of two dichloromethyl diaryl phosphonates (32P labelled) in/on rice plants was investigated. The test compounds were found to be less persistent on the surface of rice leaves with half lives 7.4 and 6.7 days respectively. Main degradation product from both the phosphonates were dichloromethyl phosphonic acid with trace of dichloromethyl-O-aryl phosphonate as a transitory intermediate product.