Environmental risk assessment of existing chemicals

Most of the existing chemicals of high priority have been released into the environment for many years. Risk assessments for existing chemicals are now conducted within the framework of the German Existing Chemicals Program and by the EC Regulation on Existing Substances. The environmental assessment of a chemical involves:

1. exposure assessment leading to the derivation of a predicted environmental concentration (PEC) of a chemical from releases due to its production, processing, use, and disposal. The calculation of a PEC takes into account the dispersion of a chemical into different environmental compartments, elimination and dilution processes, as well as degradation. Monitoring data are also considered.
2. effects assessment. Data obtained from acute or long-term toxicity tests are used for extrapolation on environmental conditions. In order to calculate the concentration with expectedly no adverse effect on organisms (Predicted No Effect Concentration, PNEC) the effect values are divided by an assessment factor. This assessment factor depends on the quantity and quality of toxicity data available.

In the last step of the initial risk assessment, the measured or estimated PEC is compared with the PNEC. This “risk characterization” is conducted for each compartment separately (water, sediment, soil, and atmosphere). In case PEC > PNEC an attempt should be made to revise data of exposure and/or effects to conduct a refined risk characterization. In case PEC is again larger than PNEC risk reduction measures have to be considered.     

Comparison of calculated and measured foliar O3 flux in crop and forest species

We designed a new gas exchange system that concurrently measures foliar H2O, O3, and CO2 flux (HOC flux system) while delivering known O3 concentrations. Stomatal responses of three species were tested: snapbean, and seedlings of California black oak (deciduous broadleaf) and blue oak (evergreen broadleaf). Acute O3 exposure (120-250 ppb over an hour) was applied under moderate light and low vapor pressure deficits during near steady state conditions. The rate of stomatal closure was measured when the whole plant was placed in the dark. An adjacent leaf on each plant was also concurrently measured in an O3-free cuvette. Under some conditions, direct measurements and calculated foliar O3 flux were within the same order of magnitude; however, endogenously low gs or O3 exposure-induced depression of gs resulted in an overestimation of calculated O3 fluxes compared with measured O3 fluxes. Sluggish stomata in response to light extinction with concurrent O3 exposure, and incomplete stomatal closure likewise underestimated measured O3 flux.     

Algal-bacterial interactions in metal contaminated floodplain sediments

The aim of the present study was to investigate algal-bacterial interactions in a gradient of metal contaminated natural sediments. By means of multivariate techniques, we related the genetic structure (denaturing gradient gel electrophoresis, DGGE) and the physiological structure (community-level physiological profiling, CLPP) of the bacterial communities to the species composition of the algal communities and to the abiotic environmental variables, including metal contamination. The results revealed that genetic and physiological structure of the bacterial communities correlated with the species composition of the algal community, but hardly to the level of metal pollution. This must be interpreted as an indication for a strong and species-specific linkage of algal and bacterial species in floodplain sediments. Metals were, however, not proven to affect either the algal or the bacterial communities of the Dutch river floodplains.     

Chromate transport through columns packed with surfactant-modified zeolite/zero valent iron pellets

Chromate transport through columns packed with zeolite/zero valent iron (Z/ZVI) pellets, either untreated or treated with the cationic surfactant hexadecyltrimethylammonium (HDTMA), was studied at different flow rates. In the presence of sorbed HDTMA, the chromate retardation factor increased by a factor of five and the pseudo first-order rate constant for chromate reduction increased by 1.5-5 times. The increase in rate constant from the column studies was comparable to a six-fold increase in the rate constant determined in a batch study. At a fast flow rate, the apparent delay in chromate breakthrough from the HDTMA modified Z/ZVI columns was primarily caused by the increase in chromate reduction rate constant. In contrast, at a slower flow rate, the retardation in chromate transport from the HDTMA modified Z/ZVI columns mainly originated from chromate sorption onto the HDTMA modified Z/ZVI pellets. Due to dual porosity, the presence of immobile water was responsible for the earlier breakthrough of chromate in columns packed with zeolite and Z/ZVI pellets. The results from this study further confirm the role of HDTMA in enhancing sorption and reduction efficiency of contaminants in groundwater remediation.     

Bioaccumulation of anthropogenic contaminants by detritivorous fish in the Río de la Plata estuary: 2-Polychlorinated biphenyls

The temporal variability and bioaccumulation dynamics of individual PCBs were studied in a detritivorous fish (Sábalo: Prochilodus lineatus) collected from 1999 to 2005 in the polluted Buenos Aires coastal area. Fish muscles contain high concentrations of total PCBs (11+/-7.2, 4.6+/-3.4 or 19+/-13 microg g(-1), dry, fresh and lipid weight, respectively) reflecting chronic bioaccumulation from sewage-industrial particulates. On a temporal basis, lipid normalized PCBs concentrations peaked by the end of 2001-2002 coincident with the rainiest period over the last four decades and shortly after PCB prohibition in the country, reflecting massive discharges to the coastal ecosystem. PCB composition in fish muscles show a prevailing contribution of hexachlorobiphenyls (35+/-4.2%), followed by hepta (23+/-3.0%), penta (20+/-3.6%), tri-tetra (16+/-4.8%) and minor proportions of octa-decachlorobiphenyls (5.7+/-3.1%) similar to an Aroclor 1242-1254-1260 1:2:4 mixture. During 2001-2002 maxima fish showed an enrichment in tri-tetrachlorobiphenyls ( approximately 1242-1254-1260 1:1:1 mixture) denoting a fresher signature. Fish/settling material lipid-organic carbon accumulation factors (BSAFs: 2.4-46, average: 21+/-10) plotted against kow showed a parabolic trend (BSAFs=-0.38 log kow2 + 5.16 log kow -15.85; R2=0.46) maximizing at hexa, hepta and octachlorobiphenyl 203 with reduced bioaccumulation of a few hepta (170, 191) and most octa-decachlorobihenyls suggesting limited intestinal absorption.     

大空间火灾烟气流动的动态显示研究

讨论了火灾烟气流动过程的计算机动态模拟方法。利用Ｄｅｌｐｈｉ可视化编程工具,建立了一个融区域模拟计算和计算机动态显示于一体的火灾发展的模拟软件,并以中国科技大学的大空间建筑火灾实验厅为对象,对典型火灾羽流及烟气层的发展过程进行了动态显示。     

Single-laboratory evaluation and modification of U.S. EPA methods 7470 and 7471 for the determination of mercury in aqueous and solid hazardous wastes

The current U.S. Environmental Protection Agency (U.S. EPA) protocols for mercury determinations in aqueous and solid waste samples (SW-846 Methods 7470 and 7471) using recirculating cold-vapor atomic absorption spectrometry (CV-AAS) have been evaluated. The U.S. EPA methods are not sufficiently flexible to permit special quality control (QC) measures, have limited detectability for low-level mercury concentrations, and are plagued by spectral interferences caused by the nonspecific absorption of primary mercury radiation by volatile organic vapors. The U.S. EPA protocols have been modified in a single-laboratory study to facilitate additional QC measures, to enhance detectability for low-level mercury concentrations, and to eliminate nonspecific vapor absorption interferences. Volumetric manipulations for additional QC measures, if required, are facilitated by performing the sample digestions in Erlenmeyer flasks rather than in the current Biochemical Oxygen Demand (BOD) reduction-aeration bottles. Typical manipulations for additional QC measures that are now feasible include dilution of concentrated samples and multiple aliquot sampling for post-digestion spike and replicate analyses. Instrument detectability is improved 10-fold by using a gas sparging bottle as a dedicated reduction-aeration vessel and a silver wool-amalgamation CV-AAS system operated in an open configuration. The on-line amalgamation/thermal desorption process of the modified CV-AAS system eliminates interfering water and organic matrix vapors prior to the mercury absorption measurement. Good accuracy and precision have been obtained with the amalgamation CV-AAS system for the analyses of four reference sediment materials. The amalgamation CV-AAS measurements on the reference sediment digests have been successfully performed at absolute mercury concentration levels that are only 1 to 4 times above the instrumental detection limit of the U.S. EPA recirculating CV-AAS method.     

Influence of Chronic Man-made Pollution on Bromus inermis Genome Size

Russian Journal of Ecology - Technogenic pollution can accelerate microevolutionary processes in natural populations. We estimated the nuclear DNA content of 10 Bromus inermis Leyss. samples from...     

Global Warming-Related Dynamics of Infection by Eubothrium rugosum (Plathelminthes,Cestoda) in the Burbot from the Rybinsk Reservoir

Russian Journal of Ecology - Abstract—Long-term observations (1968–2019) on the dynamics of infection by the cestode Eubothrium rugosum in the burbot (Lota lota) have been performed in...     

Analysis of the Shifts of Phenological Events in Birds as Indicators of Climatogenic Changes

Russian Journal of Ecology - A new method for assessing the response of biota to climatic changes in the ecosystem has been tested. In the Central Forest Natural Biosphere Reserve, the average...