Acid mine drainage from inactive eastern coal operations

The most widely used technique for abatement of acid drainage from inactive surface mines and refuse disposal areas is revegetation of a soil cover applied to the waste material. Nonetheless, acid production often persists and in some cases, limits establishment of vegetation. This paper reports on several field studies intended to determine the location of pyrite oxidation zones and migration pathways of oxidation products at inactive spoil and refuse sites.Oxygen required for pyrite oxidation is believed to he provided in the gaseous state from the atmosphere. Therefore, the oxygen concentration in unsaturated mine waste should provide an estimate of the weathering tendency in the local environment. We are currently monitoring gas composition in refuse and spoil at six sites. Barren refuse appeared to be oxygenated (>2% 0₂) in a shallow zone extending less than 1 metre below the surface during most of the year. Preliminary data from coal spoil showed that oxygen can be available throughout the unsaturated thickness, even at a revegetated site. Gas composition varied vertically and laterally at a single site and also appeared to show seasonal dependence.Hydrologic factors are also important in acid production and transport. Discharge monitoring alone does not adequately describe the mass transport of acid products through the spoil. For example, at one reclaimed mine the mean sulfate content in six monitoring wells ranged from 24% to 240% of the mean concentration at the discharge point. Sources of recharge and relative flow rates determine the contribution of a particular zone to overall discharge quality.These basic studies of acid production and transport indicate some shortcomings of standard reclamation practices at certain sites. This information will he used to develop alternative abatement technology designed to mitigate acid production at the source.     

The empirical modeling of an ecosystem

The authors have endeavored to create a verified a-posteriori model of a planktonic ecosystem. Verification of an empirically derived set of first-order, quadratic differential equations proved elusive due to the sensitivity of the model system to changes in initial conditions. Efforts to verify a similarly derived set of linear differential equations were more encouraging, yielding reasonable behavior for half of the ten ecosystem compartments modeled. The well-behaved species models gave indications as to the rate-controlling process in the ecosystem.     

Planning environmental sanitation programmes in emergencies

Environmental sanitation programmes are vital for tackling environmental-related disease and ensuring human dignity in emergency situations. If they are to have maximum impact they must be planned in a rapid but systematic manner. An appropriate planning process comprises five key stages: rapid assessment and priority setting; outline programme design; immediate action; detailed programme design; and implementation. The assessment should be based on carefully selected data, which are analysed via comparison with suitable minimum objectives. How the intervention should be prioritised is determined through objective ranking of different environmental sanitation sector needs. Next, a programme design outline is produced to identify immediate and longer-term intervention activities and to guarantee that apposite resources are made available. Immediate action is taken to meet acute emergency needs while the detailed programme design takes shape. This entails in-depth consultation with the affected community and comprehensive planning of activities and resource requirements. Implementation can then begin, which should involve pertinent management and monitoring strategies.     

Arrival timing and seasonal reproductive performance in a long-distance migratory landbird

The date when a landbird migrant arrives on its breeding grounds may have reproductive consequences. Generally, early arriving individuals begin breeding earlier and consequently experience greater seasonal reproductive performance. Here, we describe relationships between arrival timing and seasonal reproductive performance in the American redstart (Setophaga ruticilla), a long-distance passerine migrant, arriving at northerly breeding grounds in Michigans eastern Upper Peninsula. Evidence suggests that both males and females benefited from early arrival at the breeding grounds. Early males appeared to settle on higher quality territories and hatched nestlings sooner than later arrivals. Early females began their clutches early, produced heavier nestlings and possibly laid more eggs than later arrivals. Larger clutches and heavier offspring increase the likelihood of offspring recruiting into the breeding population. The findings of this study point to fitness consequences arising from when a bird arrives at its breeding grounds. These results also have implications for understanding how events occurring during spring migration influence reproductive performance as migratory delays likely influence arrival timing.Communicated by: W. Wiltschko     

The Steubenville Comprehensive Air Monitoring Program (SCAMP): analysis of short-term and episodic variations in PM2.5 concentrations using hourly air monitoring data

One-hour average ambient concentrations of particulate matter (PM) with an aerodynamic diameter < 2.5 microm (PM2.5) were determined in Steubenville, OH, between June 2000 and May 2002 with a tapered element oscillating microbalance (TEOM). Hourly average gaseous copollutant [carbon monoxide (CO), sulfur dioxide (SO2), nitrogen oxide (NOx), and ozone (O3)] concentrations and meteorological conditions also were measured. Although 75% of the 14,682 hourly PM2.5 concentrations measured during this period were < or = 17 microg/m3, concentrations > 65 microg/m3 were observed 76 times. On average, PM2.5 concentrations at Steubenville exhibited a diurnal pattern of higher early morning concentrations and lower afternoon concentrations, similar to the diurnal profiles of CO and NO(x). This pattern was highly variable; however, PM2.5 concentrations > 65 microg/m3 were never observed during the mid-afternoon between 1:00 p.m. and 5:00 p.m. EST. Twenty-two episodes centered on one or more of these elevated concentrations were identified. Five episodes occurred during the months June through August; the maximum PM2.5 concentration during these episodes was 76.6 microg/m3. Episodes occurring during climatologically cooler months often featured higher peak concentrations (five had maximum concentrations between 95.0 and 139.6 microg/m3), and many exhibited strong covariation between PM2.5 and CO, NO(x), or SO2. Case studies suggested that nocturnal surface-based temperature inversions were influential in driving high nighttime concentrations of these species during several cool season episodes, which typically had dramatically lower afternoon concentrations. These findings provide insights that may be useful in the development of PM2.5 reduction strategies for Steubenville, and suggest that studies assessing possible health effects of PM2.5 should carefully consider exposure issues related to the intraday timing of PM2.5 episodes, as well as the potential for toxicological interactions among PM2.5, and primary gaseous pollutants.     

Triclosan in waste and surface waters from the upper Detroit River by liquid chromatography-electrospray-tandem quadrupole mass spectrometry

Triclosan (5-chloro-2-(2,4-dichlorophenoxy)phenol) is an antimicroibial disinfectant agent used in a wide array of consumer products. An analytical method based on solid-phase extraction (SPE) followed by reverse phase, liquid chromatography coupled with electrospray ionization (negative)-tandem quadrupole mass spectrometry (LC-ESI(-)-MS/MS; in the multiple reaction monitoring (MRM) mode) was developed, optimized and validated for the determination of triclosan in wastewater/sewage treatment plant (WSTP) effluent and surface waters from the upper Detroit River (Canada). The mean recoveries (+/-%RSD) of triclosan and the internal standard 2'-HO-tribromodiphenyl ether (2'-HO-BDE-28) spiked to surface water and WSTP effluent samples ranged similarly from 104+/-8% and 91+/-10%, respectively, and method limits of quantification were in the low ppb/high ppt range. However, ESI(-) enhancement was found for both analytes due to sample matrix effects, as indicated by % process efficiencies (a measure of ESI(-) enhancement/suppression), which were in the 111-128% range. We report the first known assessment of triclosan in the Detroit River watershed of the Great Lakes, which preliminarily examined the presence and UV-treatment effects on triclosan in effluent from the major WSTP serving the City of Windsor, Ontario, Canada, and fate in surface waters of the upper Detroit River. Triclosan in WSTP effluent decreased 22% after final UV treatment to a mean concentration of 63 ng/L. Concentrations were further reduced to 4 and 8 ng/L (a >90% reduction) in surface water samples from sites downstream on the Canadian shoreline of the Detroit River, which was due to dilution. Two hydroxylated tribrominated diphenyl ethers, which are structurally similar to triclosan, were also detected in WSTP effluent and surface water samples.     

9,10-Phenanthrenequinone photoautocatalyzes its formation from phenanthrene, and inhibits biodegradation of naphthalene

Polycyclic aromatic hydrocarbons (PAHs) have earned considerable attention due to their widespread environmental distribution and toxicity. In the environment, PAHs decompose by a variety of biotic and abiotic pathways. In both polar and nonpolar environments, phenanthrene (Phe, a common, three-ring PAH) is converted by sunlight to more polar products such as 9,10-phenanthrenequinone (PheQ) and subsequent oxidation products such as the corresponding open-ring dicarboxylic acid product. Biodegradation of phenanthrene also usually leads to oxidative metabolites, and eventually ends in mineralization. Our experimental objective was to investigate the photodegradation of phenanthrene and determine the effect of reaction products such as PheQ on microbial biodegradation of two- and three-ring PAHs. Abiotic experiments were performed to examine the photolytic breakdown of Phe; Phe was converted to PheQ, which catalyzed its own formation. In biodegradation experiments PheQ (0.04-4 mg/L) caused marked inhibition of naphthalene (Nap) biodegradation by a Burkholderia species; Phe did not. Only 20% of the naphthalene was degraded in the presence of PheQ compared with 75% in the control culture with no PheQ added. No PAH-degrading cultures were able to use PheQ as sole carbon source; however, the Phe-degrading enrichment culture dominated by a Sphingomonas species was able to degrade PheQ cometabolically in the presence of Phe. These results may explain why photooxidized phenanthrene-containing mixtures can resist biodegradation.     

Mercury volatilisation and phytoextraction from base-metal mine tailings

Experiments were carried out in plant growth chambers and in the field to investigate plant-mercury accumulation and volatilisation in the presence of thiosulphate (S2O3)-containing solutions. Brassica juncea (Indian mustard) plants grown in Hg-contaminated Tui mine tailings (New Zealand) were enclosed in gastight volatilisation chambers to investigate the effect of ammonium thiosulphate ([NH4]2 S2O3) on the plant-Hg volatilisation process. Application of (NH4)2 S2O3 to substrates increased up to 6 times the Hg concentration in shoots and roots of B. juncea relative to controls. Volatilisation rates were significantly higher in plants irrigated only with water (control) when compared to plants treated with (NH4)2 S2O3. Volatilisation from barren pots (without plants) indicated that Hg in tailings is subject to biological and photochemical reactions. Addition of sodium thiosulphate (Na2S2O3) at 5 g/kg of substrate to B. juncea plants grown at the Tui mine site confirmed the plant growth chambers studies showing the effectiveness of thio-solutions at enhancing shoot Hg concentrations. Mercury extraction from the field plots yielded a maximum value of 25 g/ha. Mass balance studies revealed that volatilisation is a dominant pathway for Hg removal from the Tui mine site. A preliminary assessment of the risks of volatilisation indicated that enhanced Hg emissions by plants would not harm the local population and the regional environment.     

The measurement of resource rents: An application to Canadian nickel

Once the ‘risk’ of the industry is recognized, there are at least two sources of higher-than-normal returns to investment in mineral extraction: Ricardian rents to resources with different economic qualities and monopoly rents. An estimate of the relative importance of these sources in the Canadian nickel industry over the period 1961-74 is made and it is found that Ricardian rents and, for one firm, monopoly rents, were important.