Optimization of animal manure vermicomposting based on biomass production of earthworms and higher plants

The goal of this study was to optimize the mixture of swine manure (SM) and cattle manure (CM) used in the vermicomposting process, seeking to increase the manure biodegradation rate and enhance the biomass production of both earthworms and higher plants. To achieve this goal, physico-chemical parameters were determined to assess the final compost quality after 50 days of vermicomposting. The different manure ratios used to produce the composts (C) were as follows (SM:CM, % m/m basis): C1 100:0, C2 (75:25), C3 (50:50), C4 (25:75), and C5 (0:100). In addition, the earthworm biomass and the phytoproductivity of lettuce (Lactuca sativa L.) plants grown in mixtures (1:1) of natural soil and the most viable vermicomposts were investigated. The C1 and C2 compost compositions were associated with high earthworm mortality rates. The C3 compost provided the highest mineral concentrations and C5 showed the highest lettuce yield (wet biomass). The results verify that stabilized cattle manure is an excellent substrate for the vermicomposting process and that fresh swine manure must be mixed with pre-stabilized cattle manure to ensure an optimized vermicomposting process, which must be controlled in terms of temperature and ammonia levels. It is concluded that small livestock farmers could add value to swine manure by applying the vermicomposting process, without the need for high investments and with a minimal requirement for management of the biodegradation process. These are important technical aspects to be considered when circular economy principles are applied to small farms.     

Lead,cadmium and mercury contents and bioaccumulation potential of wild edible saprophytic and ectomycorrhizal mushrooms,Croatia

ABSTRACT

Lead (Pb), cadmium (Cd), and mercury (Hg) contents in ten species of edible mushrooms in Trako??an, Croatia were determined. In addition, the similarity between the studied species was determined by cluster analysis. The caps and stipes of the fruiting bodies were analysed separately. The analyses were carried out by inductively coupled plasma - optical emission spectrometry (ICP-OES). The greatest mean lead concentrations of 1.91 and 1.60 mg kg ^?1 were determined in caps and stipes of Macrolepiota procera. The greatest mean concentrations of cadmium (3.23 and 2.24 mg kg^?1) were determined in caps and stipes of Agaricus campestris and of mercury (2.56 and 2.35 mg kg^?1) in Boletus edulis. In terms of the anatomical parts of the fruiting body (cap-stipe), a considerably greater concentration of the analysed elements was found in the cap for all mushroom species. According to calculated bio-concentration factors, all the examined species were found to be bio-accumulators of Cd and Hg. On the basis of the accumulation of the studied metals, great similarity of mushroom species belonging to the same genus and partial similarity of species of the same ecological affiliation was obtained by cluster analysis.     

Effects of low doses of glyphosate on DNA damage,cell proliferation and oxidative stress in the HepG2 cell line

Environmental Science and Pollution Research - We studied the toxic effects of glyphosate in vitro on HepG2 cells exposed for 4 and 24 h to low glyphosate concentrations likely to be...     

Tar and soot generation behaviors from ABS,PC and PE pyrolysis

In this study we performed a non-isothermal thermogravimetric analysis on three thermoplastics—ABS, PC and PE. The Coats and Redfern method (Nature 201:68–69, 1964) was then used to approximate the kinetic parameters of each material. In addition, we performed a series of pyrolysis experiments in a batch reactor, for each plastic. The experiments were performed over the temperature range of 600–1000 °C at a constant residence time. The liquid and solid products of the pyrolysis, were collected, separated and weighted. Those products were categorized as soot, tar and char (PC only), and their relative weight to initial sample weight (DAF) was plotted against the temperature. The tar measured was exclusively medium to high molecular weight (>80 g/mol). Results revealed that relative tar and soot production, for all three materials, first increases and then decreases with temperature increase. The maximum achieved tar yields for ABS, PC and PE were at 700, 650 and 800 °C, respectively; and the maximum soot yields were at 1000, 1000, 950 °C, respectively.     

‘Been There Done That’: Disentangling Option Value Effects from User Heterogeneity When Valuing Natural Resources with a Use Component

Endogeneity bias arises in contingent valuation studies when the error term in the willingness to pay (WTP) equation is correlated with explanatory variables because observable and unobservable characteristics of the respondents affect both their WTP and the value of those variables. We correct for the endogeneity of variables that capture previous experience with the resource valued, humpback whales, and with the geographic area of study. We consider several endogenous behavioral variables. Therefore, we apply a multivariate Probit approach to jointly model them with WTP. In this case, correcting for endogeneity increases econometric efficiency and substantially corrects the bias affecting the estimated coefficients of the experience variables, by isolating the decreasing effect on option value caused by having already experienced the resource. Stark differences are unveiled between the marginal effects on WTP of previous experience of the resource in an alternative location versus experience in the location studied, Newfoundland and Labrador (Canada).     

Effectiveness in the Use of Natural Gas for the Reduction of Atmospheric Emissions: Case Study—Industrial Sector in the Metropolitan Region of Santiago,Chile

Abstract

The purpose of this investigation was to quantify the potential of natural gas to reduce emissions from stationary combustion sources by analyzing the case study of the metropolitan region of Santiago, Chile. For such purposes, referential base scenarios have been defined that represent with and without natural gas settings. The method to be applied is an emission estimate based on emission factors. The results for this case study reveal that stationary combustion sources that replaced their fuel reduced particulate matter (PM) emissions by 61%, sulfur oxides (SO_x) by 91%, nitrogen oxides (NO_x) by 40%, and volatile organic compounds (VOC) by 10%. Carbon mon-oxide (CO) emissions were reduced by 1%. As a result of this emission reduction, in addition to reductions caused by other factors, such as a shift to cleaner fuels other than natural gas, technological improvements, and sources which are not operative, emission reduction goals set forth by the environmental authorities were broadly exceeded.     

Remobilization of trace elements by forest fire in Patagonia,Chile

Temporal changes in the amounts of trace elements (As, Co, Cu, Mn, Ni, Pb, and Zn) and their correlations with temporal changes in charcoal abundance in age-dated sediments collected from Lake Thompson in Patagonia, Chile, attest to the substantial pyrogenic remobilization of contaminants that occurred in Patagonia during the mid-1900s. This remobilization was concurrent with the extensive slash and burn period in the region during that period. The changes in concentrations of Co, Cu, and Ni in relation to charcoal abundance in the lacustrine sediments over time were small compared to those of As, Mn, Pb, and Zn. However, the relatively low enrichment factors of all those trace elements, normalized to Fe, indicate that they were predominantly derived from local, natural sources impacted by fires rather than industrial sources. The primarily local source of Pb in the sediments was corroborated by the temporal consistency of its isotopic ratios (²⁰⁶Pb/²⁰⁷Pb:²⁰⁸Pb/²⁰⁶Pb), which were similar to previously reported values for natural lead in Central and Southern Chile. However, the pyrogenic remobilization of both natural and industrial trace elements by forest fires in Chile and elsewhere is expected to rise as a consequence of climate change, which is projected to increase both the frequency and intensity of forest fires on a global scale.     

Ecotoxicological effects of sediments from Mar Piccolo,South Italy: toxicity testing with organisms from different trophic levels

The Mar Piccolo of Taranto (Ionian Sea, Southern Italy) is a semi-enclosed and strongly polluted basin. For decades, it has been subjected to different anthropogenic impacts. These stressors caused severe sediments contamination with high concentration of different pollutants (PAHs, PCB, heavy metals). In order to assess the current status of sediments contamination, an ecotoxicological investigation combined with chemical analysis (heavy metals, PAH, and PCB) has been performed. In order to derive ecologically relevant conclusions, a multiorganisms and multiend-points approach has been applied, exposing organisms from different trophic levels to elutriate and whole sediment. The battery of bioassays consists of a microalgal growth inhibition test (Dunaliella tertiolecta), acute and sublethal assays (end-points: mortality, immobilization and swimming speed alteration) on crustaceans larvae and juveniles, and rotifers (Amphibalanus amphitrite, Artemia salina, Corophium insidiosum and Brachionus plicatilis), and embryotoxicity test on echinoderms (Paracentrotus lividus). Considering the high levels of sediment contamination highlighted from chemical analysis, an unexpected very low toxic effect was observed, even considering the sublethal end-point (larval swimming speed alteration). The results of this study suggest a very complex contaminants dynamic in the Mar Piccolo sediments that, despite a strong level of contamination, seems to not affect in a proportional manner the biological compartment.     

Assessment of compost quality for its environmentally safe use by means of an ecotoxicological test on a soil organism

A research project was carried out to evaluate toxicological effects of compost addition to agricultural soil using the earthworm Eisenia foetida (Annellida) as a representative organism of the soil fauna. Moreover, the correlation between compost biochemical stabilization and toxicity at different phases of the composting process was assessed. Samples were collected from three composting plants at three different maturation levels (beginning of the composting process, intermediate compost after bio-oxidation, and mature refined compost). Two tests were performed: a standard chronic solid-phase test and an acute solid-phase test (developed originally by the authors). In the first test, the measured end-points were mortality, growth and reproduction; while in the second test earthworms’ behavior was evaluated. The chosen compost concentrations in soil ranged from 2.5 to 100 %, with the aim of obtaining the toxicological parameters (LC50) and to mimic real agricultural dosages for the lower concentrations. Results indicated an increase in compost toxicity with greater compost concentrations; in particular, agricultural compost dosage below 10 % showed no toxicity. Moreover, toxicity did not decrease during composting; intermediate compost showed the highest LC50 values. As a consequence, no correlation was ascertained between the results of ecotoxicological analysis and waste biochemical stability parameters during the composting process.     

Optimization of Microwave-Assisted and Conventional Heating Comparative Synthesis of Poly(lactic acid) by Direct Melt Polycondensation from Agroindustrial Banana (Musa AAA Cavendish) and Pineapple (Ananas comosus) Fermented Wastes

In Costa Rica, a lot of pineapple (Ananas comosus) and banana (Musa AAA) agroindustrial residues are generated each year. These residues can be used to obtain l-lactic acid by fermentation, ultrafiltration and electrodialysis. Poly(l-lactic acid) (PLLA) is a biodegradable and renewable polyester with many industrial and biomedical applications. There is a growing interest to improve the energetic efficiency of the synthesis of PLLA, because the main issue to produce this polymer is the high productive cost compared with petrochemical traditional commodities. In this research, the synthesis of PLLA through two different techniques was compared: microwave-assisted and conventional heating. On microwave synthesis the best results were obtained using lower temperatures and lower reaction times than the conventional heated synthesis. The reaction time was reduced from 15 h by conventional heating to 4.5 h using microwave-assisted synthesis.